How Can I Populate The Combobox From Cells In An Xl Sheet
Jun 10, 2008
I have successfully used the course booking form as a base for an input form in an accounting workbook that has several pages. (Thanks to Roy and others for the info; the course booking form on [url]is the best explained piece I have found on the net)
What I would like to do is use a range of cells to populate the combobox so that a user can make a choice from the account descriptions (from a sheet named Intro, b63:99) and have the form return the account number (Intro, a63:a99) to the relevant cell elsewhere in the workbook. The user would then have meaningful descriptions rather than numbers to choose from.
I am having trouble with populating a combo box on a user form. I wish for the combo box to be populated using the names of the sheets of the workbook. I am using sheet1 as the control sheet where a user form will open up from this sheet, this will allow me to select the sheet that I require from a combo box that is placed on the form however I do not seam to be able to code the VBA to populate the combo box with the sheet names.
I am attempting to populate a ComboBox ( named "SRnumber2") on a userform (named "UpdateSR"), but have hit a brick wall. The following testing code was working but now it is not:
Private Sub UpdateSR_Initialize() 'This section of code initializes the drop-down boxes.
'Add list entries to SR Number combo box. The value of each 'entry matches the existing SR Information spreadsheet entries in column "A"
I am looking for a way to have 1 combo box, but be able to click on any cell in a range and yield an individual results. In this particular case I am tracking maintenance, and what my crew's corrective actions were for each location. As this varies day by day I cannot use HLookup or VLookup. Also, the lists vary, and have over 100 options.
What I would like is to be able to click in the cell, and instead of scrolling through a list of 109 options be able to start typing the action and it to auto populate. This gets tedious when there are often 50+ locations with maintenance calls per night.
Furthermore, keeping the results exact for VLookup that is being used on another sheet.
I've attached a blank sheet. Columns B, E, F, & H each would ideally have their own combo box. I could click on any cell in the column and when I begin typing the option it would autofill to the correct list item.
Their respective List are currently to the right under columns J, L, N, & P with their headers matching the exact name they've been given.
How I can refer to sheet...Without activating sheet. i have this
Private Sub carga_click() Sheets("Codigos de Area").Select Sheets("Codigos de Area"). Cells(1, 2).Select While ActiveCell <> "" ActiveCell.Offset(1, 0).Select ComboBox1.AddItem ActiveCell Wend End Sub
I'm looking to populate a combobox with a range that does not include hidden cells from autofilter. I will be sharing the workbook, so I cannot use Advancefilter either. Here is what I've got so far:
Set VRowSource = Sheet1.Range("A1", Sheet1.Range("A65536").End(xlUp)).SpecialCells(xlCellTypeVisible) strRowSource = VRowSource.Address
With UserForm.Combobox1 For Each cell In Sheet1.Range(strRowSource) Thisrow = cell.Row If Not cell.Rows.Hidden And Thisrow <> Lastrow Then .AddItem cell.value End If Lastrow = Thisrow Next cell End With
I need to populate a worksheet's rows with values from 2 comboboxes and a listbox which can have multiply selected items. After finding the row's last free cell, I have the listbox values properly populating correct column. However, I not sure how to get the corresponding combobox values assigned to the appropriate columns.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B A 1 A 2 A 3 A 4 A 5 B 100 B 101 B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5. If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I want to populate "selections" sheet with data from the previous sheet (it will be the date) depending on the value of a cell in column G. You will see I have already got the data from 27th April into my selections sheet but wondered if it can be done by a formula to save me copy and paste time?
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object) Application.ScreenUpdating = True End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData() Dim srcWorkbook As Workbook Dim foundEmployee As Range Dim srcWorkbookName As String srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx" If IsWorkBookOpen(srcWorkbookName) Then..........................
I have contacts list that I made and want to take it to the next level, but don't know how. See attached.
The goal: 1. Highlight an entire row of someone's contact info (i.e. row 9) 2. Click the "ORDER FORM" text box to activate a macro that populates specific cells on the 'order form' sheet with the customer's contact information from the highlighted row. The information I want copied over is in red on the order form sheet. THAT'S IT!! (Oh, and 'paste value' the current date from H5 so that the date is static on the order sheet
If possible, I would like to have an error check in case no row is selected prior to clicking on the text box that pops up the note "Please highlight a contact row before clicking the 'Order Form' button."
I want it to populate a combobox in a userform. Should it go in the code segment for the userform, in a module, or some other place? The following is code I originally found (by Leith Ross of this board) to find the last row in column "A", and load the combo box "ComboBox1"
I have created a combobox1 and I have written a code to populate the box the problem is when I run the form and select the data from the dropdown list it gives me an error. I can see the data but just can't select it. I have a command button that I use to save the data I select and insert it into fields on my worksheet. All I just need the drop down box to let me select the data I chose below is my code.
Private Sub ComboBox1_Click() ComboBox1.Value = .Range("A2:A14") End Sub
i would like to create a vba that will populate based on the comboboxes value
like this code
Code: 'for cmb1 'if cmb1 = major 1 then 'if range"F4" is empty then 'copy sheet1 range"A5:R5" to sheet2 range"F4" 'if cmb1 = major 2 then 'if range"F4" is empty then 'copy sheet1 range"A16:R16" to sheet2 range"F4"
i have the following Dim cn As ADODB.Connection Dim qc As ADODB.Recordset Dim Equip_File As String Dim Equip_ID As String Dim Equip_Param As String
Set cn = New ADODB.Connection Set qc = New ADODB.Recordset
cn.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=\ServerDISK 1UncertaintiesUncertainties.mdb" 'Populate QC Number Dropdown menu qc.Open "SELECT [Equipment_QC] FROM [Equipment_Table]", cn, adOpenStatic With ComboBox12.List .Clear Do Until qc.EOF .AddItem qc.MoveNext Loop End With Equipment_Title.Text = rst.Fields.Item("Equipment_Title").value qc.Close
however, i cant seem to populate the list, i get error :424 object required
is this because the first record in the db has the Equipment_QC field blank? i need to be able to have blank fields..
I'm looking to change the value of a variable using the selected value of a combobox. I've used the following
Dim DatabaseVal As String
'then on selecting my option from the combo box: "JVU" or "VPU" are the only two options.
DatabaseVal = cmbDbase.Value
When I try and use the variable 'DatabaseVal' to populate a value in another workbook (the workbook contains a reference to the add-in running the above macro), the cell just gets populated with a blank value. I'm sure I'm doing something stupid, but can't see what.
I am trying to populate a combo box with two columns of data read from two consecutive (or non consecutive) columns of data. The following code is what I have come up with after visiting several of the previous threads on similar topics (couldn't find one that gave a general, concise solution).
Private Sub UserForm_Initialize() Dim lngRow As Long Dim lngRowtot As Integer Parameters1.SG1.Clear 'Clear combobox SG1 in userform named Parameters1 'Find the number of rows required for the array and combo box lngRow = 12 'Start searching on row 12 Do While Sheets("Timber Properties").Range("H" & lngRow).Value <> "" 'Read until empty col H lngRowtot = lngRow - 11 lngRow = lngRow + 1 Loop Dim MyArray(1 To lngRowtot, 1 To lngRowtot) As String 'I get an error with the last ingRowtot on this line.....................
I have a VBA form and on form initialize I want to populate a combo box… My array to populate it with could be a massive list so I need to set my array before it populates
I have this code so far but I need my array to be from A5 to the last row in sheet 1
I know how to set an exact range but not one that changes.
VB: Dim myArray As Variant myArray = With Me.ComboBox1 .List = myArray End With
Here is a sample of the data I need to populate in the combobox.
I have a userform (uf_PaxInput) with a Combobox (cmb_flight_dest) which I am trying to populate from a worksheet range ("Dest") using the following code:
VB: Sub LoadForm() With uf_PaxInput.cmb_flight_dest For Each Item In Range("Dest") .AddItem Next Item End With uf_PaxInput.Show End Sub
The code seems to run okay however whent the form loads the combobox drops down to show only blank items to select. These blank items number them same number of items that are in my named range ("Dest").
I need to link the textboxes of a form to the appropriate cells associated to the selection made by a combobox. And in the process I need to be able to Edit one of those Textboxes on the fly while the rest will be locked to the user.
Not sure if the editing of the Notes section can be real time of if it must be updated through a button.
Ive got 12 sheets, one for each month, and I've got a combobox in each sheet, and Ive got a macro for each combobox, that makes it jump to the correct sheet number. The problem is that when I try to populate the comboboxes under the workbook_open() sub, it doesnt work.
Tried
Code: Private Sub workbook_open() ComboMaaned.List = Array("Januar", "Februar", "Mars", "April", "Mai", "Juni", "Juli", "August", _ "September", "Oktober", "November", "Desember") End Sub
I am trying to populate (via VBA) a textbox/combo box from one user form to another user form.
The first user form has a room number in a text box1. If certain conditions exists, a button is selected to bring up another user form (both forms are modeless).
I want to pass/populate some of the 1st user Form info into the other user form.
I have tried the on initialize textbox1.value = textbox other.value but no dice. I can populate a user form text box from a spreadsheet but from box to box in separate user forms has me a little stumped.
I want to create a userform that selects a Staff members name from a combo box, once selected the listbox would then display what time off that person has taken - ultimately I would then like to be able to select a date taken and either edit or delete it from the sheet that holds the information.
I have a userform with a combobox and a textbox, I would like that when I click the dropdown on the combobox I can pick an item from a list found on a spreadsheet in column A. This spreadsheet has two columns of data A & B. I would like to automatically populate the textbox with the data (from Column B) based on what was chosen in the combobox for (column A).
Example A B Don $5.00 John $6.75 Jerry $4.75
If I was to pick John in the combobox, I would like for the textbox to populate with $6.75.
