I want to populate a row with text "OFF" if a cell in column A is blank, I need the text to be from column F to Column S, I have a bit of code that finds the blank cell in column A and populates the cell in column F, modifying it to extent to column S.
View 2 RepliesI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
let's say you have array like this:
___A__
1|value
2|
3|
4|value2
5|
6|value 3
and you want to populate (copy, move values in) the empty cells
___A__
1|value
2|value
3|value
4|value2
5|value2
6|value 3
this code will do as long the last cell in the array is not ""
Sub PopB()
For LoopCount = 1 To ActiveSheet.Range("a65536").End(xlUp).Row
If Mid(Range("a" & LoopCount), 1, 1) <> "" Then _
TheQuestion = Range("a" & LoopCount)
Range("a" & LoopCount) = TheQuestion
Next
End Sub
i have two fields with dates - one field A1 for date authorised (for a data request) and one field B1 for date actioned (data request)
i need a formula to populate in C1 the following:
if A1 is blank then C1 is 'not actioned'
if B1 is blank then C1 is 'not complete'
if both contain dates then C1 to calculate the number of working days between the dates eg. A1 10.08.09, B1 11.08.09...C1 = 1 working day
I am trying to use VBA to populate the first blank cell in row 6 with the word "Short"
I keep getting sub or function not defined and I am sure its because I am trying to Frankenstein some code together to get it to work. So far everything works as I need but this last step.
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
The formula I'm trying to use is
=IFERROR(INDEX(L31:L6621,MODE(MATCH(L31:L6621,L31:L6621,0)+{0,0})),"")
And it works as I need it to returning the value that appears the most from L31 to L6621. My problem is the number of rows will continue to change. So I tried something like this
Sub ARBM()
Dim lr
With ActiveSheet
[Code].....
But I get a compile error with expected end of statement. How else can I write this?
I need a macro to do something very easy. I have blocks of data in an excel worksheet separated by one column. The First block begins in column B and ends in col G. Next block begins in column H and ends in L.
I'd like to copy the value from the first cell in the start of each block (b1) and paste it in the left column seperating each block (left empty column - a1) all the way down to where the data in that block ends (b60), and do this for the next column. So in the above exmaple it would populate column A (range a1:a60) with the value from cell B1.
The number of columns is the same but the number of rows vary. The value to be copied is always in the first row and first colunm of where a data block begins - so in the case above - b1, h1 etc.
I am trying to auto populate into a column that starts in cell E5 and references cell C5 (along with a dataset in N and O). In cell E6, I copied and pasted this formula and changed all of the C5 values to C6. When trying to use the auto populate cross hair tool, excel changes all N and O cells, from O165 to O166, O167 when they should have remained O165 and N165 for every cell.
=IF(OR(C5<MIN(N9:N165),C5>MAX(N9:N165)),"",IF(C5=MAX(N9:N165),INDEX(O9:O165,
MATCH(C5,N9:N165,1),1),(((INDEX(O9:O165,MATCH(C5,N9:N165,1)+1,1)-INDEX(O9:O165,
MATCH(C5,N9:N165,1),1))/(INDEX(N9:N165,MATCH(C5,N9:N165,1)+1,1)
[Code].....
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I have a excel workbook. which have a master data sheet or table as drawn.
[Code] ........
The above sheet is master sheet. I have also worksheets which named are matching with column head from "DARCL", "MMT", SSL"......till "GRT" (No "order" named worksheet is there). So I want to feed data or value as total order in "ORDER" column, (it is not necessary to put the value in each row) and the total value or number is distributed by me in particular column or colums. After data feeding I have required a command button or any button that can copy or show the reference row (customer name) with its cell value in the matched column head worksheet. As example: total order is 200 put in "ORDER" column in row 3, and 200 is distributed as by myself 100 in column "E" (MMT) and 100 in column "H" (RITC) and so on...after this feeding, I click the button and the data will show or copy as table M/S UIW : 100 in "MMT" worksheet and M/S UIW: 100 in "RITC" worksheet.
As example layout of others worksheets.(attach pic)
After click command button on the master sheet the related customer name and the value will be populated in respective matched column head with worksheet. If there is no cell value in master sheet the below mentioned cell are hides.
master sheet.jpg
others worksheets.jpg
spans over columns A:BM.
column headers are in Row 2, data starts in Row 3
the number of rows varies month-to-month
in column A, the values are either N or Y.
Column B contains xREF numbers, where if the value = N, the xREF is unique; for values = Y, the xREF = an N value xREF number (hope that makes sense!)
Where column A value = Y, some row cells are empty. All N record cells are populated.
starting in Column C, I want all empty cells (basically all rows where column A = Y) to be populated with a VLookup formula where:
Ø lookup_value = xREF in column B
Ø table_array = all N values records spanning B:BM
I can get it to work for column C by autofilling to the last row but if I autofill across columns, the col_index_num stays the same and I can’t figure out how to increase it by 1 as it autofills across.
Sub RangeLookUp()
Dim Rg As Range
For x = 3 To Range("A65536").End(xlUp).Row
If Range("A" & x).Value = "N" Then
Set Rg = Range(Range("B3"), Range("BM3").End(xlDown))
ActiveWorkbook.Names.Add Name:="TheRange", RefersToR1C1:=Rg
End If
Next x
' VLookup for blank cells........................
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
I have a data in a column B, from B17 to B1000. the data looks like:
0.1
0.5
20
15
16
20
10
I want to get the last non-blank cell (in the previous example = 10), and the one before it (20), and the one before it (16).I mean I want the last three non-blank cells. I used =INDEX(B17:B1017,MATCH(9.99999999999999E+307,B17:B1017)) to bring the last non-blank cell. I'm using excel 2003, but it's OK to use Excel 2007 if it will solve the problem.
I have a range name called 'Dates' that I need to copy to another column, however in the range name not all cells are populated (however there is a formula that specifies if a cell is blank).
I am trying to record a macro that will take me to the next blank cell in the column I am copying to, but when I go to a cell at the bottom of the column then press 'End' and the up arrow I am taken to the cell that is the equivalent of the bottom of the range 'Dates', even though this is not the next blank cell.
How can I get it to go to the next blank cell in this case?
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedI need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies View RelatedI will be moving to a specific cell - "N1". I'm looking for code that will then scan down from that cell, making the first blank cell the active one.
View 4 Replies View RelatedHere's what I tried using macro recorder...
View 4 Replies View RelatedI want to select the first blank cell in the first blank column. I would just look at the column and instruct it to select a given range, but each month the blank column will change (by moving one to the right).
So for example
This Month:
Columns A-Q all have data in it. So, I would need to select cell "R1"
Next Month:
Columns A-R will all have data in it. So, I would then need to select cell "S1" Need code to auto-detect the blank column and then select that column's first cell?
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies View RelatedI am have data in as shown below where there a number and few blank cell. I would to write a macro that loops through the column and merge blank cell with cell nonblank cell above.
20085
blank
blank
20086
blank
blank
blank
blank
blank
20087
blank
20088
blank
blank
20089
i need the vba code to
paste into last blank cell of column A
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
I need a code that will delete an entire column (J) if J6 is blank.
View 3 Replies View RelatedI have a macro that copies data from 1 sheet to another one.
However, in the destination sheet I have no way of know which is the 1st empty row that my data can be paste into.
For example, In excel in cells A2 to A56 I've got words in them, I wanted to copy all the cells in column A to B in same order,but when the word "check" is encountered, a blank cell will be added below the cell with the word "check". How can I do this?
View 9 Replies View Related