I am have data in as shown below where there a number and few blank cell. I would to write a macro that loops through the column and merge blank cell with cell nonblank cell above.
20085
blank
blank
20086
blank
blank
blank
blank
blank
20087
blank
20088
blank
blank
20089
What would be the formula to merge serveral rows of one column to one cell and separate by a ":"
View 7 Replies View Relatedi have received a file with thosands of rows of customers in it and their are two surname columns, i need to merge these two columns data together into one column.
View 9 Replies View RelatedI have some reports that I run that go out to analyst daily and I use this script to merge all the documents together. They are the same everytime. However it includes a series of blank rows because the vba I use to create them I believe causes this. Is there a command to remove the VBA when merging them together. Here is the selection copy piece.
HTML Code:
'Import a sheet from found files
Do While Len(fName) > 0
If fName ThisWorkbook.Name Then
[Code].....
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I'm looking for a way to put data into 1 column from 2 different columns, alternating every other row.
The data looks like this:
A B C
1 2
3 4
5 6
And I want C to look like this:
C
1
2
3
4
5
6
I don't necessarily need to keep the data in columns A and B, as long as C follows this format.
Excellent, just what I was looking for. I couldn't get the UDF working right, I'll try messing around with it, but the Index solution works great!
I have a very large spreadsheet, 25 columns and over 16000 rows. I want to merge all of the values into a single column. One caveat, not every cell has data in it, as shown below:
C1 C2 C3 C4....C25
2
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
I have a data in a column B, from B17 to B1000. the data looks like:
0.1
0.5
20
15
16
20
10
I want to get the last non-blank cell (in the previous example = 10), and the one before it (20), and the one before it (16).I mean I want the last three non-blank cells. I used =INDEX(B17:B1017,MATCH(9.99999999999999E+307,B17:B1017)) to bring the last non-blank cell. I'm using excel 2003, but it's OK to use Excel 2007 if it will solve the problem.
I have a range name called 'Dates' that I need to copy to another column, however in the range name not all cells are populated (however there is a formula that specifies if a cell is blank).
I am trying to record a macro that will take me to the next blank cell in the column I am copying to, but when I go to a cell at the bottom of the column then press 'End' and the up arrow I am taken to the cell that is the equivalent of the bottom of the range 'Dates', even though this is not the next blank cell.
How can I get it to go to the next blank cell in this case?
I'm trying to make a column to use as a filter for mail merging. The filter is based on a result entered into one column which is compared with a range of values in an adjacent column. I managed to get the nested IF formula to work but only when entered into a blank spread sheet or if I correct the error as prompted. I've attached an example of the spreadsheet.
View 2 Replies View RelatedIn Sheet 1, I have a list starting in row L1.
Col L
John Doe
New York
Past Locations
Previous Jobs
Male
Previous Schools
In Sheet 2, I have another list where the user will manually enter sub elements for some of the elements of Sheet1. It looks like this...
Column A |Column B |Column C
Past Locations|Previous Jobs|Previous Schools
Below that last row of headers, the user will make inputs. the list for each column should be able to run down to say 100. The inputs may look like this....
AZ |Plumber |XYZ Elementary
MD |Waiter |ABC High School
IL
CA
Now, the problem is I need to combine these two into a single column in Sheet 3 in a special way. The output would look like this.
John Doe
New York
Past Locations
AZ
MD
[Code] .....
Notice that I am taking the list in Sheet 1 as is, until i run into a value that is the header in Sheet 2, in which case I take all the contents of that header column until I am done, and then go back to sheet one, and repeat the process. I need the output in one column in Sheet 3; i don't need any special formatting.
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedI need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies View RelatedI want to populate a row with text "OFF" if a cell in column A is blank, I need the text to be from column F to Column S, I have a bit of code that finds the blank cell in column A and populates the cell in column F, modifying it to extent to column S.
View 2 Replies View RelatedI will be moving to a specific cell - "N1". I'm looking for code that will then scan down from that cell, making the first blank cell the active one.
View 4 Replies View RelatedHere's what I tried using macro recorder...
View 4 Replies View RelatedI want to select the first blank cell in the first blank column. I would just look at the column and instruct it to select a given range, but each month the blank column will change (by moving one to the right).
So for example
This Month:
Columns A-Q all have data in it. So, I would need to select cell "R1"
Next Month:
Columns A-R will all have data in it. So, I would then need to select cell "S1" Need code to auto-detect the blank column and then select that column's first cell?
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies View Relatedi need the vba code to
paste into last blank cell of column A
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
I need a code that will delete an entire column (J) if J6 is blank.
View 3 Replies View RelatedI have a macro that copies data from 1 sheet to another one.
However, in the destination sheet I have no way of know which is the 1st empty row that my data can be paste into.
For example, In excel in cells A2 to A56 I've got words in them, I wanted to copy all the cells in column A to B in same order,but when the word "check" is encountered, a blank cell will be added below the cell with the word "check". How can I do this?
View 9 Replies View RelatedI want to cut a range from one worksheet, and then paste it at the end of a column in another worksheet.
I have tried this
Sheets("Latest Results").Select
Range("b5:b500").Select
Selection.Cut
Sheets("Archived Results").Select
Range("A500").End(x1up).Offset(2, 0).Select
Selection.Paste