I am trying to use VBA to populate the first blank cell in row 6 with the word "Short"
I keep getting sub or function not defined and I am sure its because I am trying to Frankenstein some code together to get it to work. So far everything works as I need but this last step.
I was wondering if someone might be able to assist me with using VB to insert a new row below a cell containing specific text.
For example:
- All of my data is in column A
-I want to scan all of column A, and if there is a cell that contains "ACHCAMERIGROUP M", then I want a blank row inserted below it. If column A does NOT contain that text....do nothing.
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Let me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedAdd a blank space after a specific text? I have many cells in a column that all begin with the same two letters followed by more text. Something like this:
ab123
ab456
ab789
ab159
ab951
What I'd like to see is:
ab 123
ab 456
ab 789
ab 159
ab 951
I want to populate a row with text "OFF" if a cell in column A is blank, I need the text to be from column F to Column S, I have a bit of code that finds the blank cell in column A and populates the cell in column F, modifying it to extent to column S.
View 2 Replies View Relatedi have two fields with dates - one field A1 for date authorised (for a data request) and one field B1 for date actioned (data request)
i need a formula to populate in C1 the following:
if A1 is blank then C1 is 'not actioned'
if B1 is blank then C1 is 'not complete'
if both contain dates then C1 to calculate the number of working days between the dates eg. A1 10.08.09, B1 11.08.09...C1 = 1 working day
I want to populate the value of a specific cell based on the choices made from two other dependent validation lists.
I am attaching a workbook that explains what I need to do.
I am trying to auto-populate text in cells in area A, based on data I enter into other cells in area B. I want the area A cells to be for display only, as all editing will be done in area B. The problem is: how do I do this such that the text I write does not get cut off if is longer than the column width? See the attached document for a clear example and description of what I am trying to do...
Excel Q.xlsx
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies View RelatedHere is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View RelatedI have written such loop which I want to delete entire row when a given cell is empty:
Code:
lastrow = Cells(Rows.Count, "A").End(xlUp).Row
For Counter = lastrow To 2 Step -1
If Cells(Counter, 6).Value = "" Then
Selection.Rows(Counter).EntireRow.Delete
End If
Next
It works not the way I want. It has ommited some blank rows and also removes 5th row everytime I run it.
I am attempting to copy Text from one cell and populate to another, e.g.
A1 = Excellent
A2 =
A3 = Good
A4 = Bad
If i type ='Sheet 1'!A1 in the cell on my second sheet it populates fine, however i need to be able to ignore blank cells as well
I have created a form where a date and remark is added every few days. I am using Phone Number as the base of VLookup. I want a code so that the date and remark which is entered in a Text Box, is stored in the first available blank cell pertaining to that employee. I want the first date and remark to be under "Date 1" and "Remark 1".
Thereafter, if another remark is subsequently added for that employee, the form would ask to enter his phone number to identify which employee the remark pertains to. Then the Text Box where remark is entered should be stored under "Remark 1" if there has been no remark before, "Remark 2" if "Remark 1" already exists, "Remark 3" if "Remark 2" already exists and so on.
I do not want to enter it in a new row. I want to enter the remark in the next blank cell of the row which matches the employee Phone Number.
Untitled.png
I'm trying to figure out the if conditions for this relatively simple problem. Basically, this is an import from a word document where the table strays onto a new page. I want to try and repair this with a bit of VBA.
This is what it looks like:
1: cell 1 |the content should all be in this cell
2: |but the import sometimes splits it into two
3: cell 2 |
Basically if and only if cell Ax is blank (in this example A2), then I want the rows to merge each cell and repair the table.
I have a row in a table from columns C to CZ. All the cells in the row contain a formula, between 1 and 204 cells in the row will have a value (i.e. will not be blank).
The cells with a value will start at column C and may or may not have a blank cell before no more values and blank cells to the end (Col GZ).
Example:
C D E F G H I J K >..........................GZ
23 34 67 74 2 34 6 2 56 all blank ("") to end
or:
C D E F G H I J K >..........................GZ
23 34 67 "" "" 34 6 all blank ("") to end
I need to hide the entire columns when the cells in this row are blank but NOT if the blank cell has valued cells after it (i.e. do not hide columns F and G in the second example.
I can do this by looping back from col GZ and hiding the columns one at a time, which is very slow. I am stuck on the code to select all the relavent columns and hide together.
I need to be able to populate a cell with text from 3 possible cells, two will have the text "none" in them, the other text cell is the one i need to populate in another cell.
View 3 Replies View RelatedHow can I make this statement take the value from the Offset cell to populate the text box and not take the value from the text box to popluate the Offset Cell?
With txtBoarded
ActiveCell.Offset(0, 1) = .Value
End With
This code is in the user form initialize code.
here is a formula i would like in cell D20 (might not be a formula out there,maybe more code)
if cell C20= "S" then text in Cell D20= "SHOP" (then will be able to type after "SHOP")
if cell C20="F" then text in Cell D20="Field" (then will be able to type after "Field")
I have many facters (15 to be exact) that I would like to do this in the range of D20:D38
i am trying to Put a specific value i,e "NO Deliveries" in blank Cells in the same row based on value in 1st cell of the Row which has a fixed value . note:the columns and rows are dynamic for example: I want to put the value "no Deliveries" in cell C because its blank.
A B C D
% of Availability
0.00%
80.00%
I have a code now that in excel, when the button is clicked, will put file into a new email and format the email.
What I have been trying to do, is make it so that if Cell C10 is blank, you get a prompt telling you it must be filled out before you can proceed with the submission.
Here is the code now:
Sub SendTimeCard()
On Error GoTo err_handler
Dim OutApp As Object
Dim OutMail As Object
Dim subject As String
Dim body As String
' Be sure the workbook is saved first
ThisWorkbook.Save
[Code] ........
how to exclude a blanck cell from logic?
I have tried what you see below but neither works as desired.
If Not vData(n, 9) = 0 Then
If Not vData(n, 9)Is null Then
have corrected code error
I have a table with huge amount of data. I use a UserForm with textboxes to populate the information of the required row.
There's a Comment Box text on a specific cell that I need to populate on one of the textboxes but I am unable to do it.
The code I have that works well, populates the cell content:
[Code].....
Now, on that cell, there's a comment text that I need it populated as well on another textbox but it doesn't work. I tried:
[Code] .....
But this doesn't work.
I'm having a 6000+ records, (contacts DB) exported in Excel 2003 format from MS Outlook.
Except the "First" and "LastName", all other contact elements are in the field "Notes" (which is the BZ column according to the exported outlook layout) multiplied by 6469 (records in total)
Useful information are included !!!
I'll give an example of a record...
Column: BZ, Row: 543 says --> "2110000000-6989000000, 1TOK_TER:17-11-010(25 DAYS LESS),
KATERINA 25 (MANTAS KALNNNNN_HYPERTENSION)1000-150, W:95_105, , HR THE 16wks_US NEFRON OK,
NT OK_B EPIP OK(GOLF BALL)_KAMPILI ORIAKI(DIAITA)_DOPPLER OK, O+,TEST OK(TOX_), , , , , , "
Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...
Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:
Function MyMerge(Rng As Range)
For Each Cell In Rng
Temp = Temp & Cell.Value & ", "
Next Cell
Temp = Mid(Temp, 1, Len(Temp) - 2)
MyMerge = Temp
End Function
Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469.
Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...
is there a formula that will find a word in a sentence written in a cell and if present then enter specif text in another cell? for example, if the word "Hotel" appears in the sentence in cell A5 then put in the text "Hotel and subsistence" in cell B5...
View 2 Replies View RelatedSo I have a column that will have the same text in all of the cells contained within it except for one cell. Is there a formula that I can use that will automatically find and transpose the text of the one cell that is unique out of the column? I was thinking of an IF function, but the column could be up to 60 cells in length.
View 1 Replies View RelatedI have a excel workbook. which have a master data sheet or table as drawn.
[Code] ........
The above sheet is master sheet. I have also worksheets which named are matching with column head from "DARCL", "MMT", SSL"......till "GRT" (No "order" named worksheet is there). So I want to feed data or value as total order in "ORDER" column, (it is not necessary to put the value in each row) and the total value or number is distributed by me in particular column or colums. After data feeding I have required a command button or any button that can copy or show the reference row (customer name) with its cell value in the matched column head worksheet. As example: total order is 200 put in "ORDER" column in row 3, and 200 is distributed as by myself 100 in column "E" (MMT) and 100 in column "H" (RITC) and so on...after this feeding, I click the button and the data will show or copy as table M/S UIW : 100 in "MMT" worksheet and M/S UIW: 100 in "RITC" worksheet.
As example layout of others worksheets.(attach pic)
After click command button on the master sheet the related customer name and the value will be populated in respective matched column head with worksheet. If there is no cell value in master sheet the below mentioned cell are hides.
master sheet.jpg
others worksheets.jpg
How would I pull only a specific word from a text cell? If you see my example, in one column I have various job titles. If A2 contains "Manager", then in B2 return "Manager. If A1 contains "Coordinator", return "Coordinator. Etc.
Excel Forum.jpg
This is the text:
Take 5 PPE Swabs per Area, Both Shifts. Test various equipment - hands, aprons, sleeves, hats, etc.
What I need is for "Take 5 PPE Swabs per Area, Both Shifts." to be bold and highlighted in gray, but none of the other text. Conditional formatting highlights the entire cell, which won't work.
