I am trying to position a userform to my own coordinates, but I don't see how to do this in any of the form properties. I do realize that there is a startUpPosition property but none of these positions work for me.
View 4 RepliesWhen a user clicks a cell in Column A, VBA will enter the date in the cell (in the form MMDDYY) and will position the insertion pointer at the end of the date. The user can then enter a four digit number following the MMDDYY. In this worksheet, Column A holds a transaction number, which is always in the form MMDDYYXXXX. I am trying to save the user the trouble of entering the MMDDYY, since it will always be today's date.
View 3 Replies View RelatedI have 2 things, a user form and a macro.
In the user form, the user will select a month, and according to the selected month the macro will run up to a certain point. I would like to know if there is a way to sort of "abort" the macro in a certain point, depending of the selected month.
I have a user form where two command buttons are set with the following code:
Code:
Private Sub CommandButton1_Click()
Frame1.Visible = True
Frame2.Visible = False
[Code]....
Now, when cmdbtn1 is clicked, frame1 is visible and vice-versa.
However, the position of both the frames on the user form are not on the same position on the user form. Indeed, it takes the position of the design view.
I want a code which will place the frame1 and frame2 at the same place and position on user form, irrespective of its position in the design view.
Is there any way to set the list from a Combo Box to automatically start in the middle?
Whenever I select a Combo Box, the drop down list always automatically starts at the top of my selected range, ideally I would like it to start in the middle.
For example my Range that I am filling the Combo Box with lists dates: Today()-7 to Today()+7.
At the moment the first item in the combo box list is Today()-7, I would like it to be Today().
Basically, I have a Userform and am trying to have a user enter 1 datapoint into a Textbox. Based upon that datapoint (it's 9 digits), I am trying to see if I can therefore reference a linked Access Table to fill in other textboxes with information tied to that record (so if they enter a unqiue ID, I want to automatically return Name of Person, Location, etc.) . I liken it to a vlookup in regular Excel but am just not sure how to go about it in VBA.
View 2 Replies View RelatedI have a macro that calls 3 other procedures during its run. I have the positon set in the UpdateIndicator sub
With ProgressIndicator
.Top = Application.Top + 300
.Left = Application.Left + 400
end with
and the Userform StartUpPosition property set to 0 - Manual (though I did experiment with the other settings as well.
The issue is that when the series of subs are running, the Indicator jumps and shifts (by 10 or so pixels down and right) and sometimes blinks off completely as each new sub is being called and subsequently returns to the initial macro.
It is accurate and does what it's supposed to do, I just find it annoying and that it probably looks a bit unprofessional (and unstable) to the eyes of some coworkers who use the macro as well.
I have one Popup Menus in Userform, But i want to to Open Popup menu in Specific Position in userform, In Fixed Position,i want to specific a position which opens Popup Menus in Userform.
Look In Example in Attach.
[Code]....
menu_1.xls‎
I have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Is it possible to position a predetermined cell (e.g. A42) in the top left corner of the screen. (Not every screen users use has the same size)
View 3 Replies View RelatedI want to pay salespeople a bonus when they sell things at a higher Gross Profit. There is a minimum markup. I want to say for every additional point above the floor (F) well pay (B*C). There is also the actual attainment filed (A). For this example lets say the floor (F) is 22% and the actual attainment is 26%.
Illustrations:
.22 = 0(B*C)
.23 = 1(B*C)
.24 = 2(B*C)
A = .26
F= .22
What I want is:
if A >= F THEN for EACH POINT above the floor add 1*(B*C)
Its actually buried in a larger IF(AND function and I need to be able to drag the function down a long column and have it scale with volume sold. But its just this bit of logic I'm hung up on.
Does anyone know if Mappoint 2006 has automation support? I know that 2004 does. I am wanting to use the automation from excel's VBA.
View 6 Replies View RelatedPicture 2 rows and 4 columns.
The top row is just 0, 1, 2, 3
The bottom row is something like: 850, 790, 200, 250
Here's the problem: I want to find the midpoint of the data set in row 2, based on the values in row 1. So, the sum of the data in row 2 in this example is 2090, meaning the midpoint is 1045.
If we were traversing along the top row as a line, we'd find that midpoint somewhere in the 0.3 range... but how do we get that value?
is there any way to use the right function to return any data to the right of the decimal point?
eg 117.22 would be .22
108.1225 would be .1225
102.358 would be .358 etc
1.jpg2.jpg
I am trying to create a database for part stock but with only one entry point that is in image 1 you would select the machine and part from drop down lists and hit add. It would then lookup the corresponding machine and part and subtract 1 from the current stock database.
I’m using this code to run consecutive programs, which works really well, apart from one little glitch.
View 3 Replies View RelatedSee here:
http://www6.uniovi.es/~antonio/uned/...-754hex32.html
This site allows me to enter a 32-bit Hexadecimal Representation and get Decimal Floating-Point result.
For instance, 4224A012 gives me 41.2.
Is there a UDF available to do this inside of Excel?
I am trying to split the points given to our anglers. here is my formula for assigning the points (column I) based on the place (columnH):
=VLOOKUP(H5,'Supporting columns'!A2:B33,2,FALSE). I tried adding +IF(H5=H5:H33,-1) but this affected all other rankings. if 2 anglers tie for a place, the points for that place are awarded -1.
Is there a way to delete all rows down a sheet until Cell A contains ""
or if the criteria "" would work?
i only want to keep the data below that point.
i will have to do it 11 times for different files
If I am trying to calculate the breakeven moment from a project that has an initial cost and a series of quarterly returns. This is easy to do visually but I cannot figure out how to arrive at the breakeven point from a data set such as this.
e.g. 50,000 spent at time 0
5,000 received in q1
10,000 received in q2
10,000 received in q3
10,000 received in q4
10,000 received in q5
10,000 received in q6
In which month will I break even?
I'd like to point a cell to a subtotal on another sheet but that sheet will periodically have the subtotals removed, more data added, then sorted and subtotalled again. Is there a way to have my other cell find the subtotal that matches a certain criterion (in this case, cost center)?
View 9 Replies View Relatedthe rate and inventory management system my hotel uses rounds up to the next .95 currently. Most rates are based upon a 'Rack Rate' in the form of a discount percentage. So, if the Rack Rate is $129.95 and the AAA discount is 20%, the resulting $103.96 rate is rounded up to $104.95. I'm trying to fix my spreadsheet to account for the various rates and discount percentages of several different types of discounts.
I've tried a couple rounding methods:
=ROUNDUP(B$30*(1-B32),0)+0.95 which returns the correct value only when the value to the right of the decimal point is .96-.99
=ROUNDDOWN(B$30*(1-B32),0)+0.95 which returns the correct value only when the value to the right of the decimal point is .00-.95
=CEILING((B$30*(1-B32)),0.95) which returns some odd bits, sich as .85 and .50
So, is there a way to get Excel to shift the rounding base point from zero to .95? Or some other way to accomplish this?
Would like to do the following for our school,
In cell A1 there is a number, for instance: 12.12345
Based on that number, the 3rd number after the decimal is important.
If the 3rd number after the decimal is “x” then the contents returned in b2 is a text value ( like high school ) .........
I have a column of data and I want to average the figures from a certain point onwards.
I have the starting point value in a cell which is used as the lookup value to find the matching position in the list using the Match(lookup value, array) formula.
How do I then use that formula as the row number in a cell reference for the averageing formula?
eg Average(C(match(B1,C4:C100)):C100) - what is the correct syntax?
If I check the box labeled catagory name on the intial creation or within chart options on the right click menu each data point gets labeled with the name of the catagory.
I would like to label a significant event at one of these data points does anyone know how to do this? If this isn't a built in feature does anyone have a work around that would look good?
During finalization I have to convert the numbers into millions. But due to rounding factor, the total doesnot match with the displayed fig. how can I sum only upto two digits of the fig? A sample file is attached.
View 9 Replies View RelatedI have some cells with some spaces and then text where I want to find the position of the first letter. Do any of you know about any function I can use?
The example below contain 5 spaces and then my name. It should give me the answer 6.
" Magne"
Here is example... Explanation is in the title
Book2.xls
I would like to end a macro with a specific cell (e.g. E50) in the first cell in the upper left hand corner of the screen. How might I accomplish this?
View 3 Replies View RelatedI have a user who has created a spreadsheet and wants to fix the charts in a particular position.
When she places them in one position and saves the spreadsheet they appear to have moved the next time she opens the spreadsheet.
Is there any way to fix them in a certain position without having to protect the worksheet?