VBA Userform Combobox - Select Starting Point Of Dropdown Data?
May 22, 2014
Is there any way to set the list from a Combo Box to automatically start in the middle?
Whenever I select a Combo Box, the drop down list always automatically starts at the top of my selected range, ideally I would like it to start in the middle.
For example my Range that I am filling the Combo Box with lists dates: Today()-7 to Today()+7.
At the moment the first item in the combo box list is Today()-7, I would like it to be Today().
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.
If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
I am not sure if this can be done easily but essentially what I have is a userform that fills out a form that will used by several different people and saved to a central location.
There is a blank combobox currently labeled "Supplier:" that each person fills out each time on the userform (there are no dropdowns yet).
What I am wanting to do is for every person who saves (I have coded the save button) with the "Supplier:" combobox filled out to save what they entered and input that into the combobox dropdown so when the next person uses the userform the entry the previous person entered would be in the combobox as an option to select.
Essentially, a combobox populates itself based on what previous users have entered into it.
I would like to know whether it is possible to change the background colour of items in a dropdown/combobox on my userform?
I have a series of times at 15 min intervals and i want, if possible, to distingish between 'working hours' and 'non-working hours' by making the background of these numbers 'grey'.
Maybe looping through from 00:00 to 07:00 i.e 28 times (28 x 15min intervals)?
I have a list of employees that can be assigned to tasks, the list is large enough that I cannot remember who is assigned to what.
All the employees assigned major tasks are automatically filtered out but these are employees with administrative tasks that should only be assigned as a last resort. I would like to assign the employees with administrative tasks a gray, italic, strike-out or some other font to indicate that they are different.
I assume this is done during the Add Item process...
I wanted to create a userform with multipage. On the first page I want to use a ComboBox that would allow the user to select the customer. The customer name is on the sheet that I named "Customer" which also contains the street address/city/state/zip. What I would like is, once a customer is selected, I want a textbox that will be populated with the correct address taken from the sheet named "customer".
On the second page I'd like to use it for Product Info. I want to have a ComboBox, Text Box, a Command Buttons. The ComboBox is to select the "Model#" from the sheet named Product Info" and the TextBox is for the user to write their comments. One of the Command Button is to be view a sheet named "Quote" and the other is to send the "Quote" through email.
I have a macro that copies three sections of data from a word document and pastes it within the Excel worksheet. The column of data is pasted in a single column (data to be space-delimited and evaluated later), and what I would like the MACRO to do is separate the three sections of data based on the starting and ending values of the section and place them in different columns.
Section 1 : starts with the word "Team" Section 1 : ends with the word "City"
Section 2 : starts with the word "Location" Section 2 : ends with the word " Date"
Section 3 : starts with the word "Member" Section 3: ends with the word "Age"
So section 1 would be pasted into cell C1, section 2 pasted into G1 and section 3 pasted into J1.
Each section will have vary in number of rows between the starting/ending values, so to cut and paste the section based on the starting and ending value is vital.
At the moment I've got a chart with 3 series lines on it and each line has 12 points. I need to select the 12th point on each series in the chart and create a label for it. The 3 lines are Budget, Forecast and Actual and often the Forecast line hits the same points as the Budget line in the chart and every time I try to find a way to select the last point on the Forecast line, I end up selecting the budget one because it's the one in the foreground.
I can select the forecast line with the keyboard arrows, but not the last point.
I also try to zoom in to get it but one of my charts has exactly the same forecast line as budget line and I still need the forecast line because the forecast will change in future.
I can delete the budget line then add it back, but this is difficult and one I'd have to repeat many times because I'm always making graphs and labelling the final point in a series is something I'm going to have to do more often.
How do I select the last point on the forecast line if it's directly behind the budget line?
My data is set out in columns, where alternate columns provide day numbers for given years (we can call these type 1 columns), with adjacent columns containing values which correspond to those type 1 column day numbers (we can call these type 2 columns). There are about a hundred columns in total (50 of each type). I would like to get excel to return the three largest numbers within each type 2 column, but I want to exclude data within the type 2 column above the point which is adjacent to a specific (varying) day number in the type 1 column. The location of this point varies for all the type 1 columns, according to a third row of numbers (the look up start point), which are currently listed below the dataset in every type 1 column. So, for the type 1 column "year 1", I would want Excel to ignore the values 0 and 1, which are listed next to day numbers 78 and 79, and begin looking for the three largest values down the column starting from the value which is adjacent to 81 (which is a 2). In type 1 column "year 2", excel would start looking for the largest values from the cell adjacent to 78, so it would ignore the 18 at the top of the column,and would return 2 and 12. And so on.
I need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
Basically, I have a Userform and am trying to have a user enter 1 datapoint into a Textbox. Based upon that datapoint (it's 9 digits), I am trying to see if I can therefore reference a linked Access Table to fill in other textboxes with information tied to that record (so if they enter a unqiue ID, I want to automatically return Name of Person, Location, etc.) . I liken it to a vlookup in regular Excel but am just not sure how to go about it in VBA.
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.
Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
I get a macro which will provide me coloured data by eliminating the non-cloured(with white) data. Sheet1 has a combox of worksheet within an excel sheet which is listing all the worksheet in an excel sheet.By selecting the worksheet name(for example sheet1, sheet2.....sheet26) and I can move to worksheet I selected and can view the data(coloured one).I have around 25 excel worksheet within an excel sheet and each sheet has various different kind of colors but I dont want the output to show non coloured data after I select the worksheet in Combo box.
Using my workbook i want to modify the entries of a worksheet. If u hit the Commandbutton1 , u can see that i have a userform with 3 pages.
The 1st page is to create a formula The 2nd page is to modify the formula The 3nd page is to delete the formula
What i want is the following:
1-Using the 2nd page I want to select a formula description and then to modify the description or the formula or both. After that, if i hit the Ok button to save it.
2-Using the 3nd page I want to select a formula description and then if i hit the Ok button and Delete the selected formula i want the bar to move to the previous row of the deleted one. Eg.: If i delete the row 10 i want the bar to move to row 9.
3-At last ,if u think that u have to change parts of my code and make it better go ahead.
I have a database (spreadsheet) which has 3 to 4 dozen columns of data. This data is in Sheet 2. On sheet one I would like to have a form which organizes the data on one sheet from sheet 2. I would like to have a drop down box to select the country. Once country is selected all data to the right of country would then be automatically filled on Sheet 1. see attached example.
I need to change multiple conditional formats which apply to cell ranges 1 row x 17 columns wide. The specific change I am making is able to be acrried out with the code
With Selection.FormatConditions(1).Font .ColorIndex = xlAutomatic End With
However, I dont want the user to have to manually select each 17 cell area. I WANT THE USER TO JUST MANUALLY SELECT THE FIRST OF THE 17 CELL AREA. I want to write a macro that will THEN select a row of cells, 17 cells long, from the MANUALLY SELECTED position as at the moment of running the macro. Unfortunately the cells are not always on the same row in each sheet. On one sheet they may be on row 5, on another row 8 and on another, row 15 etc. I was wanting to be able to select a 17 cell range 'relative' to where the cursor is. How do I write the code to select the relative cell range? Is there an answer in an R[1]C[1]:R[1]C[17] sort of code?
So in this userform I am want it to add data to the main list of products. But, I ALSO want it to add to the specific list by selection of the data in the combo box.
It already adds the data to the main list. Now I want to be able to select the data in the combo box and have the userform data put in the specific combo box list.
In VBA editor it is the Inventory macro:
I want the macro to work exactly as it does right now, but I ALSO want the Combobox1 to dictate where Textbox1 and Textbox2 are added in a separate list on the products sheet.
I have a combo box on my userform. The selection made in the combobox will eventually control a calculation. I would like to generate some code so that when the user makes a selection in the combo box, and fills in all the requied info on the form, they can click a button on the userform which will generate a new combobox on the worksheet which would contain the user selection, along with the array that populates the combobox on the userform.
I need to populate a combo box on a form with the column name (A,B,C...etc) and the first row data. I need the code to check all columns in-case of missing column data.
Its important to note the data will be dynamic. In my add in, a form opens on requests and asks the user which column he needs to action data on. this could be on any one of several non similar spreadsheets.
E.G.: Combox to hold the following data (see column D has no data or header row):
Column A - Date Column B - Rep Column C - Customer Column D - Column E - Product
I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.
My question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.
When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.
Private Sub ComboBox1_Change() If bBlockEvents = True Then Exit Sub If ComboBox1.Value = "" Then Reset bBlockEvents = True ComboBox1.ListIndex = -1 bBlockEvents = False Exit Sub End If userow = ComboBox1.ListIndex + 3 usercolumn = 1 If userow = "0" Then ComboBox1.Value = "" Reset Else.......................
I'm a little out of my element(normally program PLC's). I have always been lucky on searching others programs and have been real successful at piecing them together to fit the application I needed. The current workbook I am working on for my supervisor will allow him to keep track of personnel's weekly job assignments. The workbook and userform work fine when just using one worksheet.
What i would like to be able to do is use the "assigned to" combobox be the indicator as to which worksheet the data is saved to. I have tried to do it several different ways but have been un-successful. Have spent the last two days reading and searching for a solution but have yet to find or understand one.
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code: Sub cmbLnOffNum_Change() Dim idx As Long Dim LnOffRow As Long
