why the code below might not execute ? It just seems like it skips over the code and doesn't run at all.
Private Sub Workbook_Open()
'AssignRequestNumber()
MsgBox ("Whoa")
Run "AssignTrackNumber"
End Sub
I have a macro assigning a unique number to the file in a fixed cell whenever the .xlt file is opened from File-New.
I have built a complex vba & multisheet spreadsheet that I am looking to secure against all the common attacks. So I have:A Workbook Open pw;
VBA password (29 symbols/numbers/Caps/lower case)
Very Hidden worksheets
Hidden rows/columns
Restricted scroll areas
Workbook protection
Code that auto protects all sheets upon opening
Registry referencing in Workbook Open with timed closure if not matched
Now I am on the last leg of implementing protection against Application.EnableEvents = False; force enabling of Macros and hiding of toolbars, scrollbars etc... Phew.
Soooo, in my research, I have learnt that if EnableEvents = False, Workbook_Open is essentially skipped and the security VBA routines are disabled. To get around, I have copied the entire contents of the Workbook_Open routine to a module under Auto_Open. The first line of both these scripts is: Application.EnableEvents = True.
Works! So far so good.
However, I have a Msgbox prompt in the scripts that displays twice. So in essence, Excel is running Workbook Open first, then Auto Open second.
If I open another instance of Excel and run Application.EnableEvents = False first before opening my spreadsheet, I only get one message. So only the Auto Open script runs.
I have noticed this on more than one workbook with an Workbook_Open macro. When you open Excel, open Workbook1, do some work , save or don't save and close, then reOpen Workbook1 without having closed the Excel application, the Workbook_Open macro in Workbook1 doesn't run.
Closing Excel and reopening Workbook1 initiates the Workbook_Open macro. It's as if Excel remembers having previously opened Workbook1 and so it doesn't rerun the Workbook_Open macro the next time you open it.
I have the following code:
[Code] .......
What do I need to change in order to make it execute the Call statement on EVERY item in the ListBox2, not the Selections.
Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet()
Dim ColNo As Integer
Dim rng As Range
Set rng = ThisWorkbook.Sheets("Week2").UsedRange
[Code] .........
I want to use this command when I open every workbook.
How do I do that? I know you're supposed to put the macro in the thisworkbook module in the workbook, but I have 600 workbooks that needs to be changed. That is just not a good idea. I've tried to put the macro in the workbook called own.xls (I use a swedish version of excel, dont know what it is called in english) thisworkbook,
I script that on open would pop up asking if a sync was done with an option for yes or no. If yes is pressed then it would just open, if no selected it would give a message "must sync before use" and close the workbook.
I do not want this message to pop up when other spreadsheets are open when this one is still open so im guessing private workbook_open
I am using the following code in my Workbook_Open sub, located in the ThisWorkbook code module. I am enabling macros when opening. All other VBA code in the project is running correctly.
Private Sub Workbook_Open()
Worksheets("Sheet1").init
MsgBox "starting"
End Sub
The init sub did not appear to be running so I inserted the MsgBox to confirm, but that doesn't come up either.
I have an Excel add-in file (stored .xla format) that is used by a lot of other spreadsheets on a network location because it is modified often, and all workbooks made from a template reference it. everything with that works fine, and any changes made to the add-in file are always reflected upon startup in the workbooks. So there isn't a problem with that. Recently I've had to add a Workbook_Open() sub into this add-in (which I wrote in 'ThisWorkbook'). However, this macro is never entered by any of the workbooks. Is it possible to have a workbook_open sub in another file? If so, what can be causing it to fail (there aren't any errors or anything like that in the sub)?
View 4 Replies View RelatedI have 3 userforms:
COS
COSP
SLevel
and I have the code
Private Sub Workbook_Open()
COS.Show
End Sub
I've a problem with the below code.
Option Explicit
Private Sub Workbook_Open()
Dim x As Date
x = InputBox("Enter End Date!")
Range("B2") = x
With Application. CommandBars("File")
.Controls("Save").Enabled = False
.Controls("Save").Visible = False
.Controls("Save As...").Enabled = False
.Controls("Save As...").Visible = False
End With
With Application.CommandBars("Standard")
.Controls("Save").Enabled = False .................
from 1 sheet i am opening several other worksheets and read in the bits i want.
i am finding that on occasions the workbook_open on these sheets is causing great performance issues because of the calc mode set to automatic in the open routine of the individual sheets. i dont need it to be set to auto but the sheet owners perfer it to be set like this and i cant turn it off their sheets. is ther a way of opening a workbook from a macro and then override its workbook_open routine?
Set wb = Workbooks.Open(sSourceFolder & "" & "mySheet.xls", False, True)
i cant find any other switches that i could use to disable this.
i have a workbook iam using as a template.(workbook "template") the user opens which then requests a job number which will then saves the workbook as the enterd job number. this workbook also contains all the material data. eg: price and type which is on sheet "data". I am hopin to get to the sheet "data" from another workbooks command button by bypassing the job enter request by the workbook_open sub. basically i need some code that disables a workbook_open sub
View 8 Replies View RelatedPrivate Sub Workbook_Open()
If ActiveWorkbook. Name = "UserA.xls" Then
Call PreviewList
Else
Cancel = True
End If
End Sub
After the macro auto-startup, UserA works on the worksheet and input some procedures and save as ClientA.xls. However, before save as ClientA.xls and close, UserA wants to change the worksheet name and Procedure name as below, how to do that?
Private Sub Workbook_Open()
If ActiveWorkbook.Name = "ClientA.xls" Then
Call RevisedList
Else
Cancel = True
End If
End Sub
problems with Global Static Variables.
In the Workook_open Sub I want to define 2 global static Variables.
For some reason I can't get it to work.
Whenever I try to access these vars they have the value "0"
I use Excel 2000.
Here is what i did:
Dim i As Integer
Dim ws As Worksheet
Public Static GlobalStartX As Integer
Public Static GlobalStartY As Integer
Private Sub Workbook_Open()
GlobalStartX = 6
GlobalStartY = 21
End Sub
the following workbook open event which repeats a macro called "Refresh" every 30 minutes. However, there is another macro "tame_blph" that i wanna call at 12 midnight everyday.
Private Sub Workbook_Open()
Call tame_blph
NextTick = Now + TimeValue("00:30:00")
Application .OnTime NextTick, "Refresh", , True
End Sub
Is it even possible to have multiple Workbook open events and/or multiple NextTick or something?
i have this code which askes the user for a job number once the workbook is opened.
Private Sub Workbook_open()
' If sheet was named by original open routine, exit
If ActiveSheet.Name = "Main Roof" Then Exit Sub
' otherwise
Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")
' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub
' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.
what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.
i have been trying to hide the userform from the workbook open event with no luck
Private Sub Workbook_Open()
ufmTheEstimator.Show
Dim Worksheet As Excel.Worksheet
If Me.Worksheets("Main Roof"). Name = True Then
ufmTheEstimator.Hide
End If
End Sub
I've been setting the above property to TRUE after making some changes in the Workbook_open event in order to stop annoying messages if you haven't physically made changes.
Unfortunately, it doesn't seem to copy through to the workbook_beforeclose event and I'm being asked if I want to save changes even though the macro made the changes and then set the property.
Here's my code for the open event :-
Private Sub Workbook_Open()
Application.ScreenUpdating = False
On Error Resume Next
For counter = Worksheets.Count To 2 Step -1
Sheets(counter).Visible = xlVeryHidden
Next
Sheets("Desktop").Visible = True
Sheets(1).Visible = xlVeryHidden.....
IN SAME SHEET.
1. IS TO RESTRICT CELL POINTER. EG. HIT {ENTER} : COL(1) TO COL(5)
2. IS TO RUN PROCEDURE WHEN DATA IS INPUTTED IN COL(3)
THESE TWO SUB CAN RUN IN ONE SHEET ?
Private Sub Worksheet_Change(ByVal Target As Range) 'SHEET1
ActiveCell.Offset(0, 0).Activate
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean) 'WORKBOOK
Application.OnKey "{ENTER}"
Application.OnKey "~"
End Sub
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Target.RowHeight = 16
End Sub
[Code]....
How to Use 2 Private Sub Worksheet_Change
I have a drop down box selecting from a list of dates (Oct-13 - Dec-14) that I need to display as "mmm-yy" to the end user so have written the following code to format when a date is selected:
Code:
Private Sub SDatePicker_Change()
SDatePicker.Value = Format(SDatePicker.Value, "mmm-yy")
End Sub
For some reason the code seems to run through itself twice and I can't figure out why. The result of this is an incorrect date being displayed (strangely when I select 'Jan-14' for example, the result is 'Jan-13'.
Perhaps I should point out that the default formatting of the date values seems to be in number format e.g. 41976.
I have VBA script to format a csv.
As part of the formatting, i want to add a private sub to the activesheet that will enable a colour-on-click function.
How can I make the overall VBA script insert of the privatesub into Sheet1?
I have two funtions which I am trying to put in ThisWorkbook.
Private Sub Workbook_Open and Private Sub 2. The Workbook_Open calls on Sub 2.
Now, with both of these in ThisWorkbook, I get the error that Sub 2 macro cannot be found.
And if I put the Sub 2 in a module, everything works.
Now, I am trying to put both in ThisWorkbook instead of only one.
I currently have this code in my sheet, and would like to incorporate the second bit of code into the same sheet, but not sure how to do it. At this point, when I just put them together neither will work.
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column 12 Then Exit Sub
If Target.Value = "Daniel Amaya" Then
Target.EntireRow.Cut
Sheets("Daniel").Range("A3").End(xlUp).Offset(1, 0).EntireRow.Insert
Target.EntireRow.Delete
My Workbook contains 12 worksheets and in each Worksheet there is a drop down list. The code for each one is in the worksheet code section where they are Private Subs.
What i want is that once the work book opens it will run the code in each of the work sheets instead of going into each bit of code and running it manually.
the below macro works when the worksheet name is Sheet1, but as soon as i change the worksheet to Rec it does not work, what have i done wrong?
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
If Not Sh Is Sheet1 Then
If Sheet1.AutoFilterMode Then
If Sheet1.FilterMode Then Sheet1.ShowAllData
End If
End If
End Sub
Does not work
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
If Not Sh Is Rec Then
If Rec.AutoFilterMode Then
If Rec.FilterMode Then Rec.ShowAllData
End If
End If
End Sub
My nacro wont work if I put private infront of sub, if I take out private it works. Its not connected to any object, just simple copy paste
View 9 Replies View RelatedI have 3 different sheets with a private sub on each all labelled
Private Sub CommandButton1_Click()
The macro's runs fine on each page.
I want to put a macro on a separate sheet that i can run each of those macro's
I did initially copy the original private macro and change the
Private Sub CommandButton1_Click()
to
sub report()
But I couldn't do all 3 in the same manner. i did change each name to something different... the other 2 subs did run, but they didn't do anything except put the massage box on the end saying that "the macro has finished".
The private macros are on sheets 26, 28 and 12.
im getting run time error 40036 and i dont know how to correct it here is the code
View 9 Replies View Related