Kill And Insert Event In Workbook_open
Sep 22, 2006
Private Sub Workbook_Open()
If ActiveWorkbook. Name = "UserA.xls" Then
Call PreviewList
Else
Cancel = True
End If
End Sub
After the macro auto-startup, UserA works on the worksheet and input some procedures and save as ClientA.xls. However, before save as ClientA.xls and close, UserA wants to change the worksheet name and Procedure name as below, how to do that?
Private Sub Workbook_Open()
If ActiveWorkbook.Name = "ClientA.xls" Then
Call RevisedList
Else
Cancel = True
End If
End Sub
View 2 Replies
ADVERTISEMENT
Dec 6, 2007
the following workbook open event which repeats a macro called "Refresh" every 30 minutes. However, there is another macro "tame_blph" that i wanna call at 12 midnight everyday.
Private Sub Workbook_Open()
Call tame_blph
NextTick = Now + TimeValue("00:30:00")
Application .OnTime NextTick, "Refresh", , True
End Sub
Is it even possible to have multiple Workbook open events and/or multiple NextTick or something?
View 3 Replies
View Related
Jul 3, 2007
I've been setting the above property to TRUE after making some changes in the Workbook_open event in order to stop annoying messages if you haven't physically made changes.
Unfortunately, it doesn't seem to copy through to the workbook_beforeclose event and I'm being asked if I want to save changes even though the macro made the changes and then set the property.
Here's my code for the open event :-
Private Sub Workbook_Open()
Application.ScreenUpdating = False
On Error Resume Next
For counter = Worksheets.Count To 2 Step -1
Sheets(counter).Visible = xlVeryHidden
Next
Sheets("Desktop").Visible = True
Sheets(1).Visible = xlVeryHidden.....
View 9 Replies
View Related
Nov 12, 2008
Kill Worksheet Code. I am using
View 4 Replies
View Related
Sep 3, 2009
I hate to post this again, but I still cannot figure this out and I haven't gotten any response. I need help folks.
The code below forces a new file to download each time the workbook TEST_CASE_1.xls is opened. I can't seem to get it to kill the _temp.xls file or save the new file (without being prompted "Do you want save"). Any ideas as to what I am doing wrong?
View 7 Replies
View Related
Jan 17, 2010
I've got a sheet that I need to convert certain rows into CSV for a payroll package. I'm using excel 2003 on XP.
I have worked out a macro to save it as a csv file with a different name. The only way I managed to do this was by creating an xls file with the data I wanted and then saving it as a csv file with a different name. But now I need to delete the intermediate xls file (called pre CSV in this example). I have the following code which seemed to work first time but is now giving me the error "Runtime error 53 - File not found" and highlights the. What am I doing wrong?
Sub Direct() ....
View 9 Replies
View Related
Aug 14, 2007
The following code accesses the external aplpication 'Avaya CMS Supervisor' and loops through a worksheet full of data pulling reports. Everthing works great. After running this code there is nothing in Task Manager that is Avaya related, however when I try to physically open/login to the application it hangs at logging in.
In order to get physically logged in, you must shut Excel completely down. That's why I don't think this is Avaya related, but more something in Excel.
Sub AvayaExportServer1()
'These correspond to menu:Tools References associated with Avaya
Dim cvsApp As New cvsApplication
Dim cvsConn As New cvsConnection
Dim cvsSrv As New cvsServer
Dim cvsCatalog As New cvsCatalog
Dim cvsRpt As New cvsReport
'Used in the For/Loop to increase rows by 1 from list of Avaya inputs on worksheet
Dim x As Integer
Worksheets("Server1").Activate
View 8 Replies
View Related
Sep 11, 2012
I have a template that needs to show one of 4 logos. The logo shown is the ONLY difference between the four models (A, B, C & D). My life would be much simpler if the template includes all four logos, and a switch controlled the one logo they want to see on each model. But the way I first programmed it absolutely KILLED my processing times for the model's many VBA macros.
What's the best way to accomplish this objective without sacrificing my VBA?
View 2 Replies
View Related
Mar 9, 2007
I have a directory that contain a large number of files. How do i preserve certain files with specific filenames while other files are deleted?
For example,
I have files that are named : "58-26150B", "58-26200", "58-26200B", "58-26500B", "58-26550" etc. Please refer to uploaded screenshot.
The files that i want to keep from the above are "58-26200", "58-26200B". The code should be able to loop through the entire directory & preserve only specific files while deleting the rest.
Private Sub CommandButton18_Click()
Dim nWave As Integer, i As Integer
Dim ConvergedFile As String, Pattern As String, KillFilePath As String, SimilarFile As String
nWave = Worksheets("nomogram").Cells(13, 4)
For i = 1 To nWave
ConvergedFile = CStr(Worksheets("nomogram").Cells(33, 3 + i)) 'Loop through list of wanted file names "58-26150", "60-25950" etc
Pattern = Mid(Trim(ConvergedFile), 1, 3) 'Update the filename prefixes i.e. "58-", "60-" etc
View 6 Replies
View Related
Feb 15, 2010
I want to use the following kill command to delete all files in a folder:
Kill "C:dsmanagerest*.*"
However, I want the directory to be specified not within the code, but within a cell on a worksheet. Ie. Cell A1 would contain the directory C:dsmanager est*.*"
View 6 Replies
View Related
Jun 4, 2008
I want to use this command when I open every workbook.
How do I do that? I know you're supposed to put the macro in the thisworkbook module in the workbook, but I have 600 workbooks that needs to be changed. That is just not a good idea. I've tried to put the macro in the workbook called own.xls (I use a swedish version of excel, dont know what it is called in english) thisworkbook,
View 9 Replies
View Related
Nov 18, 2009
I script that on open would pop up asking if a sync was done with an option for yes or no. If yes is pressed then it would just open, if no selected it would give a message "must sync before use" and close the workbook.
I do not want this message to pop up when other spreadsheets are open when this one is still open so im guessing private workbook_open
View 9 Replies
View Related
Jun 26, 2007
I am using the following code in my Workbook_Open sub, located in the ThisWorkbook code module. I am enabling macros when opening. All other VBA code in the project is running correctly.
Private Sub Workbook_Open()
Worksheets("Sheet1").init
MsgBox "starting"
End Sub
The init sub did not appear to be running so I inserted the MsgBox to confirm, but that doesn't come up either.
View 6 Replies
View Related
Oct 14, 2008
I have an Excel add-in file (stored .xla format) that is used by a lot of other spreadsheets on a network location because it is modified often, and all workbooks made from a template reference it. everything with that works fine, and any changes made to the add-in file are always reflected upon startup in the workbooks. So there isn't a problem with that. Recently I've had to add a Workbook_Open() sub into this add-in (which I wrote in 'ThisWorkbook'). However, this macro is never entered by any of the workbooks. Is it possible to have a workbook_open sub in another file? If so, what can be causing it to fail (there aren't any errors or anything like that in the sub)?
View 4 Replies
View Related
Dec 29, 2009
I have noticed this on more than one workbook with an Workbook_Open macro. When you open Excel, open Workbook1, do some work , save or don't save and close, then reOpen Workbook1 without having closed the Excel application, the Workbook_Open macro in Workbook1 doesn't run.
Closing Excel and reopening Workbook1 initiates the Workbook_Open macro. It's as if Excel remembers having previously opened Workbook1 and so it doesn't rerun the Workbook_Open macro the next time you open it.
View 3 Replies
View Related
Dec 9, 2008
I have 3 userforms:
COS
COSP
SLevel
and I have the code
Private Sub Workbook_Open()
COS.Show
End Sub
View 9 Replies
View Related
Feb 16, 2007
I've a problem with the below code.
Option Explicit
Private Sub Workbook_Open()
Dim x As Date
x = InputBox("Enter End Date!")
Range("B2") = x
With Application. CommandBars("File")
.Controls("Save").Enabled = False
.Controls("Save").Visible = False
.Controls("Save As...").Enabled = False
.Controls("Save As...").Visible = False
End With
With Application.CommandBars("Standard")
.Controls("Save").Enabled = False .................
View 9 Replies
View Related
Jun 14, 2007
from 1 sheet i am opening several other worksheets and read in the bits i want.
i am finding that on occasions the workbook_open on these sheets is causing great performance issues because of the calc mode set to automatic in the open routine of the individual sheets. i dont need it to be set to auto but the sheet owners perfer it to be set like this and i cant turn it off their sheets. is ther a way of opening a workbook from a macro and then override its workbook_open routine?
Set wb = Workbooks.Open(sSourceFolder & "" & "mySheet.xls", False, True)
i cant find any other switches that i could use to disable this.
View 2 Replies
View Related
Feb 25, 2008
why the code below might not execute ? It just seems like it skips over the code and doesn't run at all.
Private Sub Workbook_Open()
'AssignRequestNumber()
MsgBox ("Whoa")
Run "AssignTrackNumber"
End Sub
I have a macro assigning a unique number to the file in a fixed cell whenever the .xlt file is opened from File-New.
View 9 Replies
View Related
Apr 20, 2006
i have a workbook iam using as a template.(workbook "template") the user opens which then requests a job number which will then saves the workbook as the enterd job number. this workbook also contains all the material data. eg: price and type which is on sheet "data". I am hopin to get to the sheet "data" from another workbooks command button by bypassing the job enter request by the workbook_open sub. basically i need some code that disables a workbook_open sub
View 8 Replies
View Related
Jan 20, 2007
problems with Global Static Variables.
In the Workook_open Sub I want to define 2 global static Variables.
For some reason I can't get it to work.
Whenever I try to access these vars they have the value "0"
I use Excel 2000.
Here is what i did:
Dim i As Integer
Dim ws As Worksheet
Public Static GlobalStartX As Integer
Public Static GlobalStartY As Integer
Private Sub Workbook_Open()
GlobalStartX = 6
GlobalStartY = 21
End Sub
View 4 Replies
View Related
Aug 1, 2009
I have built a complex vba & multisheet spreadsheet that I am looking to secure against all the common attacks. So I have:A Workbook Open pw;
VBA password (29 symbols/numbers/Caps/lower case)
Very Hidden worksheets
Hidden rows/columns
Restricted scroll areas
Workbook protection
Code that auto protects all sheets upon opening
Registry referencing in Workbook Open with timed closure if not matched
Now I am on the last leg of implementing protection against Application.EnableEvents = False; force enabling of Macros and hiding of toolbars, scrollbars etc... Phew.
Soooo, in my research, I have learnt that if EnableEvents = False, Workbook_Open is essentially skipped and the security VBA routines are disabled. To get around, I have copied the entire contents of the Workbook_Open routine to a module under Auto_Open. The first line of both these scripts is: Application.EnableEvents = True.
Works! So far so good.
However, I have a Msgbox prompt in the scripts that displays twice. So in essence, Excel is running Workbook Open first, then Auto Open second.
If I open another instance of Excel and run Application.EnableEvents = False first before opening my spreadsheet, I only get one message. So only the Auto Open script runs.
View 9 Replies
View Related
Apr 19, 2006
i have this code which askes the user for a job number once the workbook is opened.
Private Sub Workbook_open()
' If sheet was named by original open routine, exit
If ActiveSheet.Name = "Main Roof" Then Exit Sub
' otherwise
Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")
' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub
' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.
what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.
View 3 Replies
View Related
Apr 21, 2006
i have been trying to hide the userform from the workbook open event with no luck
Private Sub Workbook_Open()
ufmTheEstimator.Show
Dim Worksheet As Excel.Worksheet
If Me.Worksheets("Main Roof"). Name = True Then
ufmTheEstimator.Hide
End If
End Sub
View 4 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Aug 7, 2006
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
View 9 Replies
View Related
Aug 5, 2014
Looking for the syntax that will allow me to code an event sub routine, based off the event of a specific function e.g. findnum being run.
View 14 Replies
View Related
Mar 23, 2012
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
View 2 Replies
View Related
May 7, 2009
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
View 9 Replies
View Related
Dec 14, 2009
What would be the name of the event where if I select a particular cell in Sheet1 it triggers something in say Sheet2?
View 9 Replies
View Related
