Pulling Data From Workbook To Another Using Code?
Jul 31, 2013
I have two work books. One is called Ipad and the 2nd is data.
- In Ipad I have 80 pages.
- Cell B20 through I20 is merged (B21:I21, B22:I22 etc through B25:I25)
- There is data in those cells which I assume would be B20 since it highlights the merged block
My question is on Data workbook, I would like to use VBA code and copy all the data from B20 to B25 from each page (1-80) and paste them in Data cell A1.
Is this even remotely possible since the cells are merged? If it would hep to un-merge them my question would remain the same. I would like the data on each page from b20:b25 copied into data Cell A1
View 1 Replies
ADVERTISEMENT
Apr 7, 2014
I have two workbook.In 'Entry'Workbook where data is filled up daily in different blank cells.In 'Report' workbook,exactly, I want to pull and update the data .The format is same.Then those changes if possible must be shown in a separate sheet.Since the data is very large,I cannot track where the changes has been made in 'Entry' Workbook'.In order to know the changes in cells,I require this on daily basis.Hence I require two things-
1.VBA Code/Macro for pulling & updating changes to 'Report' workbook from 'Entry'Workbook .And only those changes that should be ignored that has been made by me in 'Report'Workbook
2.Changes made in 'Entry'Workbook must be summarised in a separate sheet in 'Report'Workbook.
[URL] ....
View 1 Replies
View Related
Jul 24, 2014
I'm having concerning pulling data from a closed workbook by using a macro. I have tried Google to resolve the issue, but am only getting very basic results which do not apply to the situation I have (or, rather, I perhaps don't know how to edit this code in order to work in the way which I would like it to).
The above image is the main workbook, which I would like to insert the macro into. In cell A1 you can see that there is a filename location - this is the location of the closed secondary workbook which I would like to pull the data from. I would like the macro to take the location which is present in cell A1, copy cells A1:J5000 in the closed workbook, and then paste these into this workbook starting in A7 (i.e. A7:J5007). The reason that the filename location is present in A1 is due to the fact that this will be changing; however I would like the macro always to take the location which is shown in A1 (e.g. if A1 were to change from '... est00218_data.csv' to '... est00001_data.csv' then I would like the macro to take the data from the new location, test00001).
View 8 Replies
View Related
Jul 25, 2014
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
View 2 Replies
View Related
Mar 14, 2014
Right now, it pulls a sheet from another workbook, and saves it to this workbook. It works great. My problem is that I want it to keep what it pulls in, and not change when the other workbook changes. The other workbook has a macro that clears its cells every morning, so new info can be entered.
I want the old info that the code below pulled over to stay the same, so that I can keep a running history of what was entered everyday. At the moment, if I run the clear cells macro in the other workbook, it also clears all in this workbook. What needs changed in the code to make it work right?
SampleEOD.xlsm
View 2 Replies
View Related
Jan 25, 2014
I have a workbook with multiple tabs, each tab is representative of a person and their ongoing project list. What I am trying to do is to be able to pull rows from each tab identifying the persons active projects based on an assigned due date.
Details: Tabs for Tom/Susan/Phil/Jerry each person will be updating their own sheet with project completion details. Each tab has similar headers with a corresponding due date or completion date. On the master sheet I would like to pull those rows that correspond to the specific dates for all persons.
Example - give me all rows that reflect projects due on 1/21/2014.
View 6 Replies
View Related
Mar 24, 2014
I've not had much experience with VBA code, other than recording macros and editing them a little. What i would like to do is code a macro to copy the data (text only) of a whole worksheet into a blank worksheet in a different workbook, effectively allowing the user to "upload" the data to a master workbook.
The user will complete data entry into a daily template worksheet containing all formulae to obtain necessary daily data. I would like them to then be able to click a button that runs a macro copying the text data from the daily template to a monthly workbook. I have no problem recording this in a macro and the code for that (no doubt there is a more efficient way) is:
[Code] .....
The monthly workbook will contain 31 sheets (named 1,2,3...31) for the days, and each month will have it's own workbook (named Jan, Feb, Mar...Dec).
The key thing I need is using cells within the daily workbook to determine the month and day used by VBA for the filename and worksheet respectively.
Cell B5 contains the day (eg. 1) and C5 the month (e.g. Jan)
View 8 Replies
View Related
Jan 27, 2009
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies
View Related
Apr 24, 2014
I am looking for VBA which will complete my below task.
copy data from active worksheet to closed workbook.Active sheet data should copy below old data of closed workbook.data contain in A to K column of active worksheet.clear copied dataIf I moved both file any folder or drive, path should change automatically. ( something like fpath = current workbook path clworkbook= fpath & closedwbk.xls).
View 6 Replies
View Related
Jan 25, 2012
I am using the following code to copy data from multiple workbooks in a folder to one workbook.
Code:
Sub copy_files()
Dim wkb1, wkb2, wkb3 As Workbook
Dim i, lastrow As Integer
[Code]....
What changes are required in the above code to paste the data in different sheets on one workbook.
View 2 Replies
View Related
Jun 5, 2008
Following syntax is incorrect, what is wrong? This should happen: Select op a specific worksheet (named DATA) in the workbook Report.xls and I empty the contents
Then I try with a 'With' statement to read the contents of a file named "sourcedata.xls' with helds a worksheet named "source". The values in this sheet should be tranfered to the sheet DATA in the workbook "Report.xls"
Sub FetchDataFromClosedWorkbook()
Dim FileName As String
Dim SheetName As String
Dim cellRange As String
Const ReportPath = "C:ExcelReports"
Windows("Report.xls").Activate
Sheets("DATA").Select
Cells.Select....................
View 3 Replies
View Related
Mar 17, 2014
My workbook stores data related to items that are all tracked by barcodes. Im using the following code (as part of a larger set of code) to copy data from rows 6 on in column D, E & G to K from one workbook to another. The data in F (Item Names) is found using a formula, by matching the barcode data in the corresponding G cell (on the same row) to another sheet (where the barcodes and Item names are stored). When the data has finished copying over and EnableEvents gets turned back on the F column mostly automatically fills itself in from the formula.
The issue I have however is in certain circumstances there are some items that either dont have a barcode, or the barcode is missing. In this case the user types "none" (not case sensitive), which opens a userform allowing the user to type in an Item name that gets entered into the F cell, overwriting the formula. I need to copy this data over separately to the new workbook. Im looking for code to find these records from row 6 on (either by searching for rows where G equals "none", or rows where F has no formula, and then copy the data in F over to the other workbook to the corresponding row number but offset by the number of records already present in the active workbook (currently being calculated by wbReturnDataLastRow).
[Code] .....
wb is the ActiveWorkbook that the data is being copied to
mybook is the workbook that the data is being copied from
View 6 Replies
View Related
Mar 3, 2008
I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.
View 14 Replies
View Related
Jun 10, 2009
i want it to change the Header in E1 to the name of that price level and have the prices change according to that price level. The price level prices are currently being pulled from another tab through vlookups which lookups up the part numbers. My method only works with 1 price level right now and have no clue how to approach it with more then one price level. Also these part numbers will change positions and locations and are not permanent hence why i thought to use a vlookup.
Is there a way macro wise ( preferably through a formula ) that i can have Column E prices change according to the Price Level Entered.
View 2 Replies
View Related
Aug 6, 2014
In the little chart on the left, I have the customer name, when their story is due, and when it was completed. On the right, I want to show how many words per hour my journalist is averaging for each week. What I'd like to do in cells J2 through J5 is to have a formula that pulls out the total number of words written for all projects that occurred during that time frame. I can't seem to figure out the formula, though. I was thinking that I needed an array formula starting with ifferror and calling from the row functions, but I can't seem to get it to work out right.
Here's my sample sheet: sample data journalists.xlsx
View 3 Replies
View Related
Mar 16, 2009
I am trying to create a spreadsheet which will help us analysis the sale of each of the inventory items.
Col A: Item #
Col B: Description of Item
Col C: Standard COGS
Col D: Price
Col E: Profit %
On Sheet 1(Standard), I listed all 205 items with columns b-e also being filled in.
On Sheet #2(Actual Sold), I want to just enter the Item # and have all the other info on Col B - Col E fillied in automatically.
View 13 Replies
View Related
May 27, 2013
What I am trying to do is pull data from one spread sheet into another. The Data spread sheet has 2 columns. Date and Price. What I need to do is enter a date in to row b2 (example 2/13/2013) Then Cells c2-v2 fill in with the data from the 20 days prior to 2/13/2013. Also note that I use only dates from weekdays.
View 7 Replies
View Related
Jul 16, 2008
I have a 4 columned table with 10000 rows
Entry # Correlation Index1 Index2
1
2
.
.
10000
I want to be able to create tables out of this where I can pull all line items with correlation > 0.8 or <0.1 or <0.3 etc.
I think a macro will have to be written for this.
View 9 Replies
View Related
Jun 19, 2006
I have searched extensively for an answer to this but can't find anything.
I am pulling data off the web and it puts data down the column in the following manner:
Data
Number
Number
Data2
Number
Number
I need to extract each set of Data to another worksheet. The problem is that it will be anywhere from 1 row each to 10 rows each. In each instance, there is a blank between the two sets of Data. I've looked at ISBLANK, LOOKUP, SEARCH, etc. but nothing I've tried has worked out.
View 11 Replies
View Related
Feb 8, 2008
I have written a macro to pull in data from a website each day. However the macro falls over because the end of the url changes slightly each day as the website provider updates the information. Unfortunately there does not appear to be a logical pattern to the number change in the url and so I don’t think I can pre-empt what the change will be. The path through the website remains the same, but the url changes as a new csv document replaces the old one. Is there any way of writing the macro so that it opens/picks up the current url rather than a fixed url?
View 9 Replies
View Related
Aug 24, 2008
I went through the thread http://www.mrexcel.com/forum/showthread.php?t=302438. I have similar problem of pulling the data from http://www.nseindia.com/ site. Could you please help me?
The navigation to the page required is as below.
http://www.nseindia.com/ > Equity > Historical Data > Security-wise data >
eg. NSE Symbol: RPL, Series: ALL, From date: 01-01-2008, To date: 01-05-2008.
After clicking on the 'Get Results' button it navigates to the page with tables. At the end it says "Download file in csv format". upon clicking this a csv file opens. (http://www.nseindia.com/content/equi...-2008RPLXN.csv)
I need this page to be opened in Excel sheet. How should I go ahead?
(Basically I need historical stock data csv files of various stocks)
Even though a simple web query opens the page, it do not work if the parameters (stock name, date) are changed.
I found that the last resulting page in csv is using a "REFERRAL URL". Could this be a problem? How to get around?
I know little bit of VBA and can further work to pass variables.
View 9 Replies
View Related
Aug 20, 2009
I get excel files containing information listed by store for the entire company. How can I sort and pull out only the information pertaining to the stores that are in my area?
View 9 Replies
View Related
Mar 5, 2010
information from a website that does not allow web queries (or at least from Excel 2003).
I have to pull the latest data every Wednesday from this webpage: [url]
To make things even more complicated the name of the page changes every week as well (corresponding to the date).
View 9 Replies
View Related
Jan 31, 2007
I am having trouble pulling data from a website. I need to get data from this website:
{url}
I need the highs and the low temperatures for the next week. (just the numbers preferably). But when I go to Data>> Import External Data >> New Web Query i'm not able to get any of the numbers into Excel. This way worked fine with other websites.
View 3 Replies
View Related
Aug 30, 2012
I have a spreadsheet with multiple data tabs feeding a few summary tabs.
For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.
I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.
View 2 Replies
View Related
Apr 16, 2013
I have a generated list that pulls data from a different sheet. I need a formula to pull only unique values from that generated list since some values are list multiple times.
[URL] ......
View 4 Replies
View Related
Jun 22, 2013
In VBA I'm trying to grab numbers from a cell range (ie: A1:A10), and save them to a matrix or variable. I will later need to grab additional numbers and add it to that matrix. I have experimented several different ways, but belows demonstrates what I'm trying to do:
VB:
my_data = Range("A1:A10").Value
my_data = my_data&Range("B1:B10").Value
View 2 Replies
View Related
Nov 23, 2013
I have over 7000 items with a unique 6 digit item number each. They are separated buy category numbers. So category 5 may have 30 item numbers in it. column A has 555555555666666666777777777. Column B has the item numbers. I have about 200 categories.
In the workbook I have separate sheets for each category.
I need to pull all the item numbers from category 5 to sheet tab 5, all cat 6 numbers to sheet tab 6 and so on.
I do know excel but never used code.
5
562462
5
845294
5
349124
[Code]....
View 5 Replies
View Related
May 14, 2014
I am tracking 3 different payment types, and the employee, customer and dollar amount for the transactions that can not be verified. All of this data is then transferred over the the "Summary" sheet. I found the Countif formula that will tell me how many times an employee names appears on the sheet, but I was wondering if it were possible to also calculate the dollar amount associated with those transactions.
I have attached the spreadsheet to better explain what I am talking about, but below is a very small example. I do not want to calculate the info on this page, but rather add another 2 cells next to where the number of unclaimed and the % of unclaimed are calculated on the "Summary" sheet. Sample spreadsheet2.xlsx
A B C D
1 Date EmployeeCustomer $
2 1-Jan MonicaJohn Doe $65.00
3 2-Jan AshleyJane Doe $85.00
4 3-Jan MonicaJustin Doe $15.00
5 4-Jan MonicaJessica Doe $135.00
6 5-Jan AshleyJeremy Doe $100.00
7 6-Jan CheriJustine Doe $50.00
8 7-Jan CheriJace Doe $450.00
9 8-Jan JudyJackie Doe $50.00
10 9-Jan MonicaJake Doe $65.00
11 10-Jan JudyJennifer Doe$85.00
View 11 Replies
View Related
Jul 29, 2014
i am currently working on a file that counts things during the day and then sums them up. i have a different sheets for each day witch are named 28.07,27.07,26.07 etc'
i want the current sheet to pull data from the last sheet, lets say from cell I10. so if i'm working on the 28.07 - i use the formula " ='27.07'!I10' " and it works just fine. but i want to automate it. lets say make a cell in every sheet with the name of the previous one (i figured out how to automatically generate it) and make the formula pull from there. so lets say if i use the cell B2 for the value of the previous sheet (27.07) - it should look like " =B2!I10 "
View 4 Replies
View Related
