I have this spreadsheet where in there's a Raw Data. Along with is there's a different tab for different user, is there a way that if a certain user choose a date it will pull up the data for that date in the Raw Data.
What formula should I use? and how should I do it.
I have random comments in a column of cells of which I'm searching for a specific string of characters that may be contained in each cell. I want to pull 2 pieces of data from this specific string and place the data in 2 other cells in the same row.
Sample comments in cell 'N1':
..... blah, Appt: Friday; 12/4; night drop off. blah, blah.... Sample comments in cell 'N2' (and so on and so on):
Have a worksheet Pricelist, require to pull data from the columns to a new worksheet only if qty is more than 0, and delete empty rows afterwards. Required result is in worksheet order. Original file is about 10K rows.
I've attached a workbook with a description of what I'm trying to do. I'm not sure if it can be done with formulas or if it will require VBA. I can move it to the VBA section if the latter terms out to be the case. it's not that I'm opposed to copying code, I just like to know how it works with enough depth that I can fix/modify it, and I can't do that with VBA).
I would like the following columns to show on a new worksheet if column Z and AA (which show a date and time) are the same as todays date, the columns of info I would like it to pull through are Column C,D, Z, AA. The row numbers could be different daily? is this possible?
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
I was wondering how to input data on one sheet, then have specifics from that first sheet get sorted and put on the second and third sheet according to it's value. I have attached an example with my comments in red.
I have a workbook for a category of academic journals. It contains the journal name in the first column, the year it was published in the second and various bibliometric stats in the next twelve as follows: ....
I have a spreadsheet that has employee name and average hours worked.. The employee is listed multiple times because each row represents a pay period with number of hours worked. the last column I used to average the hours worked. So what I need is whenever there is a value greater than 30 in column g, I need to copy the row where column G has a value. It can be copied on the same sheet or on another.
I have a data base with 12 columns of data. I need it to look for one criteria in one row, match it, look for another criteria in another row, match that, and then once those criteria are met, average those rows that met the criteria with the statistics in that row that contains a value.
Such as: Monica 2 Timed 310 Michele Tom 3 UnTimed 410 TC Art 5 Timed 216 TC Monica 4 Timed 415 Michele Tom 6 Timed 200 TC Tom 4 Untimed 216 TC Art 8 Timed 410 TC
What I need is the formula to search in through the data, look for Tom, then find all the ones that say UnTimed, and then average the number in column 2 that match those criteria.
I have a big data sheet. I have approximately 2170 rows and 50 columns. In some rows I have a series of consecutive zeros. I need to build a formula that gives me the date ( located in row3) right before the first zero in the series of consecutive 12 zeros.
For instance in row 1340 I have a series of 12 consecutive zeros. The first zero happens in column AC, therefore I need the formula to retrieve cell AD3. however every rows has zeros located in different cells therefore I need a general formula.
I'm using Excel 2007 and I'm looking for a way to extract certain records/rows from a table and to have that data copied to another area of the spreadsheet. I actually want to extract Invoice amounts according to a specific account number so that I eventually end up with all the invoices for a particular client on another tab so that they can be printed out as a kind of client statement.
I know there are ways to filter and then copy the records/rows to another tab but I want it to be automated as far as possible. What I really want to do is to "pull" the records into a new tab by using some kind of formula in the cells where I want the data rather than having to copy it there. I know how to sum data for this kind of thing but what I'm really struggling on here is being able to "Display all the records in a seperate area" first before I eventually add formulas to sum.
I don't mind the records being coppied if the process is automated but don't really want to get into macros as writing macros isn't my strong point.
I've tried using "VLOOKUP" but it will only return values for the first data item it finds (Account number in my case), whereas I really need it to continue to return values for the data item it finds if there are multiple instances of it!
automate a data table I set up in excel. I need the formula to look through a bunch of raw data I have, and add quantities in each row, but only from the rows that have the same machine numbers. I attached the document of raw data I've collected, and on a separate tab, an organized table. I would like this table to automatically be updated with the appropriate data, as I enter it as raw data.
I have a huge list of survey responses which asks people to identify their location and then rate how important 6 facilities in their area is (rating 1 - 4, 4 being most important). So the table has cells are similar to this, except that there are about 5000 responses with about 2500 different locations identified
Location Location Location
I have been able to analyse the average results for the whole dataset by using the following formulas:
=COUNTIF(A2:C4,"camden") Count number of occurrences a location is listed =ROUND(AVERAGE(D2:D4),2) Average response for medical centres =COUNTIF(D2:D4,1) Counts number of times '1' comes up, would repeat '2', '3', and '4' to create a pie graph
But what I would really like to do it be able to count each response for each question by location (for example "Camden"). I've tried both of these but they don't seem to be working.
I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row
Sub deleterows() Dim i As Integer Dim intCounter As Integer Dim strLocation() As String
p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count
I am trying to pull titles out of a text string but its quite difficult because of how the data was originally inputted. I need titles that appear in the following different formats
" title" title/ title"
These titles were not inputted consistently and it could show up in the middle or at the beginning. I have attached a sample of the data that i am working with and a sample formula that i was trying to use to obtain my information. The formula that i have is a nested formula of find and mid formula that searches for the text within " ".
I have a list of dates in this format (7/20/2013) that go through several months. I would like to make have a formula that takes all of the dates from a specific month out and make a new list of those days. For example, if I have 7/20/2013, 6/28/2013, 8/3/2013, 7/1/2013. I would like to to take only the dates from July and put them in a new list: 7/20/2013, 7/1/2013.
i want it to change the Header in E1 to the name of that price level and have the prices change according to that price level. The price level prices are currently being pulled from another tab through vlookups which lookups up the part numbers. My method only works with 1 price level right now and have no clue how to approach it with more then one price level. Also these part numbers will change positions and locations and are not permanent hence why i thought to use a vlookup.
Is there a way macro wise ( preferably through a formula ) that i can have Column E prices change according to the Price Level Entered.
In the little chart on the left, I have the customer name, when their story is due, and when it was completed. On the right, I want to show how many words per hour my journalist is averaging for each week. What I'd like to do in cells J2 through J5 is to have a formula that pulls out the total number of words written for all projects that occurred during that time frame. I can't seem to figure out the formula, though. I was thinking that I needed an array formula starting with ifferror and calling from the row functions, but I can't seem to get it to work out right.
Here's my sample sheet: sample data journalists.xlsx
What I am trying to do is pull data from one spread sheet into another. The Data spread sheet has 2 columns. Date and Price. What I need to do is enter a date in to row b2 (example 2/13/2013) Then Cells c2-v2 fill in with the data from the 20 days prior to 2/13/2013. Also note that I use only dates from weekdays.
I have searched extensively for an answer to this but can't find anything.
I am pulling data off the web and it puts data down the column in the following manner:
Data Number Number
Data2 Number Number
I need to extract each set of Data to another worksheet. The problem is that it will be anywhere from 1 row each to 10 rows each. In each instance, there is a blank between the two sets of Data. I've looked at ISBLANK, LOOKUP, SEARCH, etc. but nothing I've tried has worked out.
I have written a macro to pull in data from a website each day. However the macro falls over because the end of the url changes slightly each day as the website provider updates the information. Unfortunately there does not appear to be a logical pattern to the number change in the url and so I donít think I can pre-empt what the change will be. The path through the website remains the same, but the url changes as a new csv document replaces the old one. Is there any way of writing the macro so that it opens/picks up the current url rather than a fixed url?
I went through the thread http://www.mrexcel.com/forum/showthread.php?t=302438. I have similar problem of pulling the data from http://www.nseindia.com/ site. Could you please help me?
The navigation to the page required is as below.
http://www.nseindia.com/ > Equity > Historical Data > Security-wise data >
eg. NSE Symbol: RPL, Series: ALL, From date: 01-01-2008, To date: 01-05-2008.
After clicking on the 'Get Results' button it navigates to the page with tables. At the end it says "Download file in csv format". upon clicking this a csv file opens. (http://www.nseindia.com/content/equi...-2008RPLXN.csv)
I need this page to be opened in Excel sheet. How should I go ahead? (Basically I need historical stock data csv files of various stocks)
Even though a simple web query opens the page, it do not work if the parameters (stock name, date) are changed.
I found that the last resulting page in csv is using a "REFERRAL URL". Could this be a problem? How to get around?
I know little bit of VBA and can further work to pass variables.