I wonder if there is a way to enter my formulas as an array formula using Control-Shift-Enter in a more time saving way than one line by one line
I have 600 rows of array formulas all in column E but at different intervals with some blank rows inbetween
The formulas are in place but just need the CSE to enable the array formula { }
I am not looking forward to line by line entry.
I attached herewith a file filled with Countif, sum, or, and. I look for a VBA to get lighter file. Because the file in fact will be filled up to 40,000 rows.
View 7 Replies View RelatedIs there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedI have a macro creating an array, populating it, and using the array to fill in values. The whole array works except for one entry. The one field, if changed to have a space, works perfectly.
EG:
Not working with macro:
Redlife
Working with macro:
Red life
Other entries that are similar (eg: redwork) work fine without having to create the space.
The second worksheet is pulling information off of a website, and the entry is downloaded as redlife. I could write in a section to replace "redlife" with "red life", but it's a bit more complicated than what I know how to deal with. The array is completing the values on the first worksheet, where the array is originally populated.
In column A I have Dates
January till....
The code below count the number of months and then should create only, this amount of new tabs (based on monthlist array)
So if I had Dates from January till October it should create only 10 new sheets.
So far is entering all of them. I know I'm missing a loop somewhere
Code:
Sub AddSheets()
Dim lmax As Long
Dim lmin As Long
Dim lmonth As Integer
Dim cc As Integer
monthlist = Array("jan", "feb", "mar", "apr", "may", "jun", "jul", "aug", "sep", "oct", "nov", "dec")
[Code] ..........
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
I've been given a spreadsheet that is poorly constructed but I'm not allowed to alter.
The layout is:
Box Name Box Date ID1 ID2 ID3 ....
Where there is not a fixed number of IDs in each box
(There are five different sheets so I'll have some fun concatenating results)
Given a list of IDs I need to return the box name and box date that the ID's file sits in. The spreadsheet has blanks everywhere and the numbers contained in rows are non-consecutive and smaller values can appear later in a column than larger ones.
I think I need some combination of index, offset and maybe sumproduct? TBH, I avoid sumproducts like the plague, preferring to utilise sumifs and dynamic named ranges since this improves clarity so I'm basically a newb at them.
Any skeleton framework that you think would work to return the text values for the LHS where the number could be anywhere? Once I can see a rough example I should be able to get to grips with the logic and wrangle it into the necessary solution.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
I just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
Working on athletics worksheet. Have worked out a formula to attribute a PB (Personal Best) in a MIN range not including the first cell entry (as first entry is not a PB) in events where less =PB
=IF(ISBLANK(F6)," ",IF(F6(MAX(V$5:V6)),"PB"," ")) keeps recognising first entry as PB. Any help greatly appreciated
first entry could be anywhere in the column but all entries after will be below it.
I'm creating a spreadsheet where a test note taker needs to repeatedly enter the date/time code in a column as events occur.
I tried recording a macro that will enter the =now() formula and then copy that over itself with the value but didn't work.
So now I'm thinking I need to just write code that will determine "now", and write that serial value to the next open cell (with care not to overwrite the previous data point). I'd like to execute this with a simple keystroke.
The thought is to start at the top of the column, go down until the next blank cell is reached, insert the time code (can't be a formula that will change but an actual value).
if there is a quick way to add any number of tabs to a spreadsheet.
ie one particular spreadsheet i need to have 32 sheets (tabs) but am getting seriously bored to right click insert worksheet time after time. there must be a quicker way?
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
Is there a way you can copy formulas to the next line when a new entry is automatically added to a spreadsheet via a form?
View 1 Replies View Relatedhow can I prevent an entry in a cell even without formula lets say cells B1 , C1 , D 1 , E1
I want to prevent an entry in these cell and if you try an error message will display
I have a list of account balances in one column. How can I pick up only the bottom number in that column? I have 20 worksheets and want a total across all worksheets of the last number listed in a particular column but each worksheet is different because they contain a different number of rows with activity. So, if in col. C I have:
$482
$1,000
$899
$456
$231
... then I want $231 to be what is captured for that worksheet, but if the 2nd worksheet contains:
$500
$1000
$344
... then I want $344 to be what is captured for worksheet 2. Does that make sense. In the end I want to sum $231, $344.... etc.
I have a database of 6 digit numbers in one column(let's say column A). I would like to put in a 6 digit number in a cell (b1)and have another cell (c1) give me a response as to whether that number exists in the database (Exists or Doesn't Exist).
View 2 Replies View RelatedI have a cell with a formula in it. I want to use conditional formatting on this cell if the formula result leaves it blank. Given the formula is in the cell it's never recognised as blank. If an entry is input instead the formula then obviously I don't want the conditional formatting.
What formula can I use in the conditional formatting for it to recognise the Cell formula as blank?
I have a cell that has a result which is the average of a few other cells (In this case the result is in cell Y7). I now want to take that total and put it in another cell to represent todays result..I.E. I have a list of this months dates and I want the todays result to be populated in the table. So I have a list of dates and the cell next to each date has the formula:
=IF(TODAY()=A24,$Y$7,"").
It populates todays result fine however the next day it blanks the result (since the cell is no longer todays date).
SO the question: How to I have todays result oerwite the formula so the result is permanent in that cell. I guess I am looking for some sort of PUT command to take the result and PUT it in another cell without that cell being a formula itself to GET the date.
I have a problem to solve
I have 2 worksheets named 'Products' and 'Order'
At the 'Order' i use 3 cells
Code
Pallets
Cases
When i entered a code to the cell 'code', it reads the code from the sheet 'Products' and then transfers to the active sheet 'Order' some items.
What i want is:
Because the user has to enter the quantity either to the cell 'Pallets' or
'Cases' i want to be locked the empty cell each time and to be used for calculations.
1st Eg.
The "45870"
Pallets to order : 50
because the user used the pallets the cell "Cases" must be locked and it must calculate the 50 pallets*100 so
Cases : 5000
2nd Eg.
The "45870"
Pallets to order : null
Cases : 5000
because the user didnt use any pallets the cell "Pallets" must be locked and it must calculate the 5000 cases/100 so
Pallets to order : 50
I'm trying to set a cell so that it has a certain value based on other cell(s) information. I can put a formula into the cell to do that, but I also want to make the cell available for user input, preserving the formula should the user change their mind and delete their input.
Basically, it's a cell with a protected formula that can be overridden with user input, then if the user decides to take their input back out, the formula kicks back in.
I've found several threads describing how to make a chart title dynamic by entering a cell reference into the formula bar with the chart title selected. I am wondering if anyone knows if it is possible to have VBA "code" a formula into a chart title that would be a concatenation of several strings. Ideally, I'd like to specify part of the title from a variable, and another part from a user-specified range, as in the following snippet from a module of mine:
ChartSubtitleText = Sheets("Sheet1").Range("A5")
ActiveChart.ChartTitle.Select
Selection.Characters.Text = ChartTitleText & Chr(10) & ChartSubtitleText
where ChartTitleText is a string variable that is passed to the Sub. This works fine and correctly builds the title block during execution of the macro, but I'd like to modify the capability to allow the user to enter a new value in Sheet1!A5 and have all of the charts update dynamically without re-executing the macro. Is there a way to have VBA create the chart and build the Chart Title with a formula that will allow for dynamic updating? I've tried having it enter the following line into the formula bar, but get errors: =CONCATENATE(ChartTitleText, CHAR(10), Sheet1!A5)
The goal of this code is to check between two sheets, if it finds a match between both sheets (somewhere in column A) then it should copy E,F,G columns from Sheet2 to Sheet1..
The Sub Test()
aLastRow = ActiveSheet.UsedRange.Rows.Count ' last row of active worksheet; assume master is active sheet .....
I've been having a play with sorting integers in A1:I1 (because that was the example in Wikipedia). I've got some code that kind of works, but the recursion is entirely manual.
(I know it's only a mickey mouse example, and no practical use!)
Sub quicksort()
Dim iPivotIndex As Integer, iPivotValue As Integer, iTempValue As Integer, iStoreIndex As Integer, i As Integer
Dim iStartNumber As Integer, iEndNumber As Integer
'how do I give it the original iStartNumber and iEndNumber
iStartNumber = InputBox("Start")
iEndNumber = InputBox("end")........................................
Auto-Numbering
just an example:-
56
57
58
59
60
The Column above is the first column on a selected sheet.
i will select 56 and from there (End-Shift+Down arrow) which selects all the values from 56-60...
My question is from here on if there is a shortcut key or 'vba macro' that can autonumber from 1.
Thus giving output result of..
1
2
3
4
5
i want to record the solution for above problem in a macro recorder for different numbers that is why i have to do (End-Shift+Down arrow)
I am doing a "Lost and found" spreadsheet project for a hotel.
Each row contains the lost items with all the necessary info in separate cells (Room nr, found by, reference nr, client name, etc)
Every item is being bagged and then a label is put on it. ( has the same information but its just arranged prperly. (Like a label )
What I would like to do is to have a column in each row that has a "print" button. What would happen is that the macro would create a label in sheet2, print it on the default printer and then erase everything on sheet2. (I am kind of new to macros so I dont even know if I need to use the sheet 2 for it).
I have already done a kind of a template for the label and set it up on sheet2. I would probably manage to get the print function working with the online tutorials(if not i'll be back) but can't figure out how to do the first bit of it.
I have two spreadsheets, each with about 50-60 separate worksheets in them, and each spreadsheet has simarly named tabs. I am trying to replace the values in column Q on spreadsheet 2, and move them to column O on spreadsheet 1, on each worksheet.
Is there a way to do this quickly, or will I have to copy-paste many times over?