I have a database of almost 35,000 rows. There is a column where I need to enter a value of either 1 or 2 for each row provided that 2 is repeated randomly without any pattern 2023 times and 1 is repeated for rest of the rows.
View 2 RepliesPokerDrills22.xls
in the cell M12 I would like to get when "OOP vs 1 opponent" or "OOP vs 2+ opponents" a random answer "SB" or "BB" and when "IP vs 1 opponent" "MP" or "CO" or "BTN" and when "IP vs 2+ opponents"
"CO" or "BTN"
Ex:
M6 "IP vs 2+ opponents" M12:"BTN"
M6 "OOP vs 2+ opponents" M12:"BB"
how to do this? There were similar things I asked for in my previous thread but really always seem not to get the right results as soon as the function gets complex.
I am trying to make a student sorter using a master class list in Excel. I would like to sort about 900 people randomly into 30 different rooms and then output the data on a summary sheet that has the 30 room numbers across the columns. I am not sure how to approach this. I need the randomization of Column A on the first sheet and then the sorting of the randomized list into lots of 30 on the second sheet by room number.
View 5 Replies View Related[URL]
I have Column C and D filled with numeric temperature and humidity data. I need next 16 rows (8 more set) to be filled with randomly generated dummy data by the values exist in C and D. Same numbers but randomly distributed.
There should be a formula to extract the largest values and its corresponding values. For example, if column
Products Costs
A1 Pen 200
A2 Pencil 125
A3 Radio 670
A4 Apple 1500
A5 Xbox 222
A6 TV 100
The desired outcome
Products Cost
Apple 1500
Radio 670
Xbox 222
Pen 200
Pencil 125
TV 100
The second goal is extracting the top 3 largest values using a formula.
Sample file is attached for your convenience. Desired outcome is in GREEN.
Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
I have two columns in excel, col A and col B.What I would want to achieve is following:
Col A Col B
A 2
A 2
A 2
B 3
B 3
B 3
B 3
C 3
C 3
C 3
Now I want a total of values in column B pertaining to unique (or say 1st occurences) of values in Col A. So in this case the output should be 8 ,Achieved as follows(2 +3+3).
[URL]
Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I am trying to sum certain values in one column based on the values of another column. I made a few tables, generated some random numbers, and then I started writing up an if-then statement to see if I could get what I am trying to do to work. However, I was having difficulty getting the program to run, because I was declaring more than one variable (I think).
So for instance, I want cells in column G to sum forces in column C when a joint in column E matches a joint in column A. Similarly, I am trying to do the same thing for columns F and B.
I have attached a picture, which shows what I would like for the program to do automatically (rather than me doing it all manually)! I didn't include the code I wrote, because it was so minimal
Attachment 51660
Ccheck the attached sheet for the explanation.
Book1.xlsx
I'm currently working on a spreadsheet that contains 30,000 leads and their respective companies and i need to filter out any leads that work for companies present in a different list of companies (1,834 companies). Basically, i need to filter column A so that it only contains companies present in column B. Is there a way to do this using the advanced filter?
View 1 Replies View RelatedI have about 360 records in Column 1 and less columns in Column 2 (333 in this case). All the values in Column 2 are in Column 1. I need to be able to match those two columns up while keeping the data in Column 3 intact with it's corresponding value in Column 2. FYI I searched and found this thread: ttp://www.excelforum.com/excel-work...n-another.html
But my problem is that I have to tie in the values with column 3 to their corresponding values in column 2. In order to illustrate, I have attached an excel file in which I did the operation manually. (note: all values in column 2 are indeed in column 1 but not in the example as I have shown for the sake of convenience).
I have two DB extracts for 2012 and 2013 with customer id's that no not repeat across the year - columns A and B. I need to arrange this from:
2012
2013
270806
330011
330011
350529
350529
369916
to:
2012
2013
270806
0
330011
330011
350529
350529
0
369916
So the major idea is that the customers that are extinct in 2013 would appear as 0 in the Column B; customers that are the same would be aligned vs the previous year and new id's would appear on the separate row.
I have a workbook with 20 sheets in English Language, but I must to translate in Russian. Translating has done by human translator, so translation is good. I must change phrases and words in english to russian. I can use find/replace function but doing by hand it's very tie consuming. I need VBA or macro who takes values in column A, finds it in entire worksheet and changes it to matching value in column B. Is it possible and how I can do it?
View 1 Replies View RelatedI have a vba form with three comboboxes. The first combobox contains a list of employees, the 2nd a list of work activities and the third a list containing hours. As each employee enters the data for their name, activity and hours these values are saved to sheet6 starting at A10, B10 and C10. I want to be able to sum the hours for each employee who enters data. So the completed user form could look like the following:
HTML Employee (A) Activity (B) Hours (C)
Joe Swept 1.25
Raked 1
Bill Mowed 2
Cleaned 1
Joe Trimmed 1
So as you can see there could be a blank cell in column
"A" under Joe and Bill and Joe could come back later and
enter more info. What I want on sheet6 say starting at A30 the value
Joe would be entered and in B30 his total hours 3.25. In A31
Bill would be entered and in B31 his total hours 3 and so on for other
employees
If values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
Before and after examples are below....
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
Here's an example of what I need..
I want to
A B
2.5 corn
4 corn
7 green
2 green
I'd like a macro to find all corns, add up the column A for each corn and place the sum beside the last corn in column C
Then do the same with green, etc.
What I am trying to do is give the rank in column D based on the values in columns B and C. Some of the values in column B will have then same rank, and as such I want to add further criteria on which to rank them. I would first like to rank the values in column B and then rank the values in column C, which should give the rank in column D. For example Dog and Frog have the same value of 400 from the Non UK column. Therefore, rather than having these as both rank 1, I want them to be ranks 1 and 2, so want to add another criteria (UK). As Dog is greater than Frog in the UK (i.e. 10>7), I would like to rank Dog as 1 and Frog as 2. Goat will be ranked as 3 because it had the thrid highest value in the Non UK.
ABCD
1Non UKUKRank
2Cat20055
3Dog400101
4Eel200114
5Frog40072
6Goat30023
I have Column A and Column B up to 200 rows of unsorted values. I would like the user to be able to choose X value and this would basically find the top X values in column B, then sum the corresponding adjacent top X values in column A. I tried using the array formula within the SUMIF formula, but it doesn't work.
View 5 Replies View RelatedI am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
I have a code that inserts a new column after every 7th column. I want to include a formula where every 7th column value is subtracted from the values present in the column before the 1st, or you can think of it as subtracting 7th column of the present group from the 7th column of the previous group. Example: The range of my data starts from col F, then
F (7th) New Column (G) H (1st) I (2nd) J (3rd) K (4th) L (5th) M (6th) N (7th) New Column (O) P (1st) Q (2nd) R (3rd)
So, New Column (O) = N - F
and the next New Column (W) = V-N ...
NOTE: Column G can be ignored.
I want to add a looping function to this so that it will continue to subtract for the other respective columns as well. How do I incorporate this into the following code?
[Code].....
I'm using Excel 2013.
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
The yellow highlighted column F (each Reason) in the sheet2 to be placed as main header in the next column and so on as seen in the sheet 3
If they have two similar item number with 2 different reasons - delete the duplicate item number and place the number in each column according to its reason as seen on row 16 on the sheet3
If they have two number with similar reason - just sum up the number
sample excel 2.xlsx