I don't understand what I am missing. but I can't paste a string into a cell [range.cells(x,y).text = string]
Here is my
' ' -delete any rows that contain "Fab 11"
' -rename any cell that has "Supply x" (Delete " supply x" from text)
Dim cellText As String
Dim i As Integer
Dim lastRow As Long
Dim rngSigac As Range
Dim wb As Workbook
Dim ws As Worksheet
If I have a cell (a1) containing the text "Sage, Navision, Hardware" how do I write a sumif formula that will add up a set of numbers based on cell A1 containing the text string "Navision" (for example)
I have a form with several combo boxes, and they function just the way I like as far as being able to pick from the list, or typing in them and having it show you the next available item in the list as you add letters. Whats happening that I would like to know how to deal with is... as soon as you type a letter that is not in my lookup range it generates an error. "Could not get the list property - Invalid property array index". I don't want people to be able to add to the list, but I would like a msgbox to pop up. Then allow them to go back to the box and try again.
View 2 Replies View RelatedI want to display a string to users. Normally I would do that using message boxes. But that would not give me enough control over the font size, and I want to display using font size 48.
I could have used global variables, but that is not a good coding way. The other way of doing that is using property procedures. I could pass a string variable to a Label control on the form and then could format it.
I need to state whether a particular word, string or text in one cell, appears anywhere in a sheet.
Attached example: does the word AAAAAA in cell A10, appear anywhere in the range A3:A6
I need to be able to drag this formula so need a generic formula rather than adding specific text in speech marks to it.
Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.
Sheets(" Book Query").Range("A6:I6").Select
Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlsCellTypeVisible).Select
Selection.Copy
Sheets("Inventories and Variances").Select
Sheets("Inventories and Variances").Range("A7").Select
As per title, I am trying to compare a column of text cells which contain "Yes" or are empty and a columns of numbers. If they are "Yes" and "1" on the same row, I want to output an "OK" message. Excel seems happy with the following code but it does not work and returns an empty cell if the two conditions are true.
[Code] .....
Here's an interesting one:
A1 contains a text string which is both bold and unbold (
B1 is blank
I need a macro which scans the cells with text and copies the BOLD portions of the text string into the adjacent cell.
Example:
A1
The sky is blue
Macro is run
B1
sky blue
I need to create a macro to do the following:
Search the activecell for a text string (a), and then either paste in text string (b) at the end of the cell if (a) is found, or text string (c) if (a) is not found.
For example, if the activecell has "AA/" in it, I want the cell to become "AA/01" (pasting in "01" at the end), and if the cell has just "AA" in it, I want it to still become "AA/01" (pasting "/01" at the end). The macro will be linked to a commandbutton.
I have a column of data with letters in each cell, no numerical, only alpha. Now, some of those cells contain the letters "adj sub" as part of the text string in each cell. "Adj sub" is always at the beginning of the text string. As an example, a cell will look like this - "adj sub mhm". I want to delete rows whose cell description does not contain "adj sub" as part of the text in the cell.
View 5 Replies View RelatedI have a sheet in which some of the cells have two strings separated by a linefeed. I have come up with a cumbersome formula which will let me check if either of the two strings is a member of a list stored on another sheet. However, it fails if there is only one string in the cell, presumably as there is no linefeed for the formula to find. How can I modify the formula to cope with this situation?
There are also on occasions, three strings in the cell, but I can't seem to access the middle string with the formula. Simplified spreadsheet attached to show the problem. This must be formula-based, as we have a no VBA policy. If you think there is better way of doing this, please let me know.
I want to count the number of times a word appears in a range (like M9:S663), but sorting it by the month it appears (eg: january = 2, february = 56, march = 2000, etc.)
I managed to do this but there has to be a better way
=COUNTIFS(RNM.1;"PRUM Transcripcion";FechaComite;">=01/01/2012";FechaComite;"=01/01/2012";
FechaComite;"=01/01/2012";FechaComite;"=01/01/2012";FechaComite;"=01/01/2012";
FechaComite;"=01/01/2012";FechaComite;"=01/01/2012";FechaComite;"
I am trying to count the number of specific words contained in a specific cell. If my data were static, and the list of keywords was short, there are many solutions such as using multiple instances of the length function as proposed by @shg here.
Suppose I have the following sheet: (column C is what I am trying to achieve)
A
B
C
1
[Code]....
That is, C2 will tell that B2 contained 3 of the keywords (1X beautiful, 2X happy) and so on.
I have a worksheet with following values:
A
B
C
1
Shorts
75
[Code]...
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
Is there a way to change the font size and style of a comment of a certain cell?
I mean is it possible to have the sizes of comments varies in one worksheet?
I am trying to create report of the in and outs of tools we are shipping for repair.
Currently in Tab 1
Column F - Date shipped for repair
Column G- Vendor Name
Column H- Date Returned
What I need in Tab B
Vandor - Total Sent- In Repair @ Vendor- Total Repaired - Total Unrepaired
Here are Images if it makes it a little easier to understand
The Info I currently have
image1.png
The info I required filled out based on the previous data
image2.png
The following line comes up with an error message, where downoffst is an integer variable that has already been defined.
Set sumif1stRange = Range("c5:c[downoffst]")
Do you know how to debug this?
Below is the code I started:
[Code] ......
The range contains a list of names. I want the sub to start with the first name and sum the value(long) which are in 7 columns to the left of the text string. Once this procedure has been done for the first name, it should go back up to the second name and do the same and so on. Once done I will return the name (cell A1 in another sheet) and its respective sum (cell B1 in another sheet) so that I have the list of names with their respective sum.
Sum function using an offset of 7 columns to the left?
I have a userform within an Add-in. The form contains multiple text boxes, shown as a grid. When the user uses the calculate button - the text box in question is raised and highlighted using the follwing code within a case statement:
View 2 Replies View RelatedI have been stuck in this piece of code. Depending on what I try, I get instances of 1004 run time error.
When this code is running, the sheet is not the active one. I tried to activate as well, with no success.
Code:
Sub WriteRankData(Region As String)
Dim i As Integer, z As Long
With shCurrentYear
For i = 9 To 41 Step 4
If .Cells(1, i) = Region Then
[code]....
I was able to find the syntax to add a cell within a text string but I am having a formatting problem. The cells which I am adding were using formulas that left decimals. Although I turned off all of the decimals on the cell, the values when I used the cell within the text string included all of the decimals and in some cases 6 or more decimal places. Is there a way to keep the formatting of the cell?
View 11 Replies View RelatedI have a cell that is populated by clicking a button which pulls info from an external source over which I have no control. I need to confirm the selection made by the user contains one of four quarterly values: Mar, Jun, Sep or Dec. I have this but wanted to know if there is a better alternative or a way to shorten the code.
Code:
If InStr(1, UCase(celltxt), "MAR") Or InStr(1, UCase(celltxt), "JUN") _
Or InStr(1, UCase(celltxt), "SEP") Or InStr(1, UCase(celltxt), "DEC") Then
I want to remove a string of text from the front and rear of a cell value and would like to do it with one formula. I have tried using LEFT,RIGHT and LEN. I would Like to use the SUBSTITUTE formula as the user can define the actual string to be removed.
I can achieve want i want using two columns i would just like to be able to consolidate down to one.I have tried nesting the formulas but i always seem to get an error.
Characters to remove
Raw data
Output
Front
dog
dogcatmouse
cat
Rear
mouse
dogratmouse
rat
Assume that the table uses stadard naming conventions for Columns(a,b,c...) and Rows(1,2,3...)
I do have a price list for my inventory for each product code (only letters)
E.g. productA 100
productB 200
When I'm writing in the order list, I'm writing in a single cell product code + size e.g. productA 5, productB 7
I need to get the corresponding price for each cell.
I need to find a formula which will search a list of cells looking for a particular text string. If it doesn't find this text string it then needs to search for the next one. For instance if I had a list of product codes: ABCD1234, BCD1234, ABCD2345, CDE23456, BCD2345 I want the formula to look up and see if the cell contains the text ABCD and if so return ABCD as the value, if not I want it to go on and see if the cell contains BCD and return the value BCD, if not then go on and search the value CDE etc. It seems like an easy job to do manually but I have a list of over 3000 codes to do this.
View 4 Replies View RelatedI want a formula or function that will return a count value if a cell contains a string rather than returning a value if the cell equals a value. For example, =COUNTIF(A$1:A$19703,F1) returns a value to cells in column G if the value in column F equals any exactly matching value in A. I need a formula that works like the filter option "contains" so that if any cells in col A merely contain a string rather than exactly match or equal a string from column F I can get a count value returned.
View 9 Replies View RelatedI want to be able to use a macro to read cells from a certain column so that it will evaluate a text string untill it hits a blank space, then copy the text that it found. I'd like it to work on Excel 2003 or later
View 9 Replies View RelatedI am using VB and need to search each cell in the row for a string "U30". If it appears, then I need to grab that plus the next three digits, "U30XXX". Otherwise, I need to grab the last six in that row (=RIGHT(M2,6)). I am not sure how to structure the If statement in VB. I searched the forum and help files, but was not sure what to do from here. Currently, I have...
Range("I2").Select
ActiveCell.FormulaR1C1 = "=RIGHT(RC[4],6)"
Range("I2").Select
Selection.AutoFill Destination:=Range("I2", Cells(Rows.Count, "I")), Type:=xlFillDefault
I have a text box in a USERFORM .Have the following code associated with the text box. (which perform basic arithmetic.... e.g. If engineers wanna key in 39+137, instead of 176.)
[Code] .....
When I run the userform, the userform’s INITIALIZE procedure populates the textbox with value from a cell in the spreadsheet. When I delete the value completely , it gives error almost instantaneously:
Error is "Could not set the value property. Type Mismatch".
I have a text field at the bottom of a user form that remains hidden (i.e. visible = false) until the user clicks the "Ok" button. At that point, I want the text field to appear as the macro is running (it's a large macro, so the text field just says "processing, please wait...").
The first line of my macro is: