I want to have a range of days in a cell, for example in cell A1 will have may 2-may 9. when I use the autofill handle I want A2 cell to read may 10 - may 17 and then if I use it again A3 will read may 18- may 25 and then roll over to the next month . As it stand right now if I put in may 2 - may 9 and use the autofill handle the next cell down will read may 2 - may 10.
View 2 Replies
How can i use the Autofill handle for letters?
I want to be able to do the following:
In cell A1 i type: A
In cell A2 i type: B
Then i want to use the handle to get in column A the rest like C D E....Z AA AB AC.......AZ BA BB BC etc.
Sheet1!A1 = Sat
Sheet2! A2 = I need this to equal Sun....
I tried =sheet1!A1+1 but got #value
I am working on a "Salary Payment voucher excel Userform".
How can i do it, if i don't want manually fill in the number of working days into the textbox myself, Can i have the userform to automatically fill in the number of days when i initialize the userform.
We are working at 6 Days weeks.
I am using excel 2013 in my laptop (windows 8.1) after having upgraded excel 2007. Everything works fine during my daily tasks. Especially autofill which I use quite often works perfect.
At the same time I upgraded my girlfriends laptop (Windows 7) with the office 2013 (office 2007 was the older version) and somewhere there begun some isues. Autofill doesn't. Especially with months or days. I enter the value "Monday", I drag down (of course using the black filled cross down right of the cell) the cursor and all the cells get the value Monday. Even if enter the value Tuesday in the second cell and then try to autofill (having marked before both these two cells) I get the same results. Monday, Tuesday, Monday, Tuesday.
I tried to test the autofill with numbers. If i write only the one number (for instance the value "1") and then autofill, this doesn't work. It gives me the value "1" in all the cells. But if I enter the value "2" in the second cell, the autofill works fine (marking these 2 cells and then autofill).
We make some online courses using exactly the same excel exercise files. In my laptop everything works perfect.
How can I auto fill a range while leaving the cell number the same?
Code: =IF(AND(B4>=c2,b4=c2,b4=c2,b5=c2,b6=c2,b7=D2,b4=E2,b4=F2,b4=G2,b4=H2,b4
I recorded one for an autofill series which basically came out as
View 4 Replies View RelatedFor our attendance register, the master data table holds a list of all club members (one member per row).
The master data table consists of formula columns, data columns, and two data columns with drop-down list validation.
I'm using this
I'm creating a Macro to paste a series of formulas from a template in hidden rows above to cells further down in the same worksheet. My code works fine if I set an absolute range as the Destination - here's a portion of it:
Sub TimelineRow150()
Dim TimelineMatch As Integer, ProjectPlan As Object
TimelineMatch = ActiveCell.Offset(0, -1).Value
If TimelineMatch = 26 Then
Range("E26:AQ28").Select
[Code]....
I'd like to be able to copy and paste this code to run it multiple times in the same worksheet, (the TimelineMatch variable actually has 26 different options). Is there a way to replace the [Range("E150:AQ152").Select] portion of the code with a range that is relative to the Active Cell? (I'd instruct users that cell E be the Active cell before running the Macro, and E to AQ is still the range I need the copied data to appear.) I've tried using ActiveCell.Offset, but I keep getting an error of Method 'Range of Object' _Global' failed.
Copy and paste the formula into a range or paste a formula into the first cell in the range and autofill down for remainder of cells?
P.S. when autofilling down, can I specify somehow for it to stop at the last row with data in adjacent cell?
I am trying to copy a countif formula down a column using the fill handle, but when I copy the formatting down the column the range changes. Is there a way to make it so that only the variable changes and the range stays the same?
View 2 Replies View RelatedThis is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
How do you set the range with whats below? Right now its looking at 4,2 only and if extend to look all the way to 19,2 it will just copy the whole screen. I need it to look at 4,2 and then move to 5,2 and then so on once it has copied all that information to the sheet ...
View 7 Replies View RelatedHow can i set the range for the Sheet3 i have taken IngDataColumn. It select only particular column of fixed that is 4
[Code] ....
i would like to set a criteria bewteen a ranges. eg If A1 >0 but <100 then .3, Else If A1 >99 but <200 then .6, Else .9. How do i write this in the cell?
View 4 Replies View RelatedThis should be easy ... can't figure it out. If I want a formula that wants to perform an action (NPV, but I don't think that matters) on the cell directly above and the next "X" (say 20 cells/years of cash flow) to the right of it, how can I set it up so that I can copy the formula across as well as change "X".
(Obviously, it's easy to select a 20 cell range and copy it across ... but what if I want the length of the range to by dynamic (ie I want to switch to a 40 year NPV instead of a 20 year)?)
I am trying to set an Array to prompt user with a series of questions and input answers into a specific row. However, I want to skip over certain columns and leave those blank. How would I modify my code to do this?
Code:
Private Sub CommandButton2_Click()
Dim ArrQues() As Variant
Dim ArrInput(2) As Variant
Dim lngLstRow As Long
Dim strPNfromSales As String
ArrQues = Array("Enter the Part Number.", _ "Quantity Being Returned?", _ "What is the Reason for Rejection?")
For b = LBound(ArrQues) To UBound
[Code]...
I want the first two questions to be input into Column B & C, but then the third question to be input into column I.
When I'm using the Macro recorder or even after I've completed a sequence is there a way to change the range so it code always covers the complete range of the data?
View 9 Replies View RelatedI have multiple worksheets each with varying amounts of data. I have a number in cell A1 that I need to autofill down to the bottom of each worksheet. All of which have varying amounts of data.
RA-0151
0
765804
3308345
168
0
5.74E-07
8.8E-09
1.371696
0
0
[Code] ........
When I record a macro it sets the autofill range as the bottom of what ever worksheet I recorded it on.
How can you write a macro that goes to the last row of each worksheet.
Sub Macro1()
'
' Macro1 Macro
'
' Keyboard Shortcut: Ctrl+a
'
Range("A1").Select
Selection.AutoFill Destination:=Range("A1:A122"), Type:=xlFillCopy
Range("A1:A122").Select
Range("B1").Select
End Sub
I have a general list from which a chart is created. Column one contains a date series. There are a fixed number of dates in this series (approx 50 or so).
I would like to select a start date and an end date from this list and have the chart display the data from that range.
Typically I would simply create a new list and build the chart from the list, but I'm kind of hoping that I could do it from a single source rather than make mulitple lists.
I am attempting to set a variable as a range of data that sits on a non-activated worksheet. However, I am getting a runtime error of 13 (data mismatch).
Is there something in my code that may be incorrect? Here is my code:
Dim rRange As Range
Dim sRange As String
Dim tblName As String
[Code]......
Code:
Private Sub Worksheet_Activate()
On Error Resume Next
Set sT = Sheets("Report")
On Error GoTo 0
On Error GoTo nendR
If Not sT Is Nothing Then
[Code] ........
I get a Subscript out of range at Set cT = Sheets("RGA by Customer") line.
It baffles me that when neither sheet exists and the first part runs there is no problem, but when it gets the the above mentioned line I get this error. Same exact code, just a different sheet name.
Again, when the sheet exists there is no problem. Only when I click on Sheet1 (or start up the file) and this sheet doesn't exist do I get the error.
Im trying to set a range using a named range and dont know the best way to do this. so far ive got
Set rDataRange = Range(Offset("datastart",1, 0) & ":" & Offset("datastart",LastRow, 0))
datastart is the named range in the sheet and im trying to make a new range that starts 1 row below where datastart is and end where lastrow is. not sure where i messed up on this but i get errors when i try to run this
I'm having trouble setting the Range "UtilizationRange" using a variable, "CurrentRange" to store that range. I get the error "Run-Time error 1004: Method 'Range' of object'_Global' failed".The rest of my code works when I set the utilization range using the actual range for my purposes, but the problem is the range will change each month and I don't want to change it manually each time. There's a cell in the excel sheet this refers to (AG3) that holds the range value, which in this case is [N7:N75], and I would just like to return that value to the variable "CurrentRange" and set UtilizationRange equal to that.
The value is returned to CurrentRange, but it's the last line that's giving me the problem.
Sub RangeTest()Dim UtilizationRange As Range, Cell As RangeDim CurrentRange As String
CurrentRange = Range("AG3").Value MsgBox (CurrentRange)
'This returns the value [N7:N75], which is what I want
Set UtilizationRange = Range("CurrentRange")End Sub
This is the code that Recorder proffers to simply take a Range of 3 Cells and make Type Font Black/Bold and to place Thin Borders inside the range and Thick Borders aroung the range.
ActiveCell.Offset(0, -2).Range("A1:C1").Select
Selection.Font.ColorIndex = 1
Selection.Font.Bold = True
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
With Selection.Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
I have a certain number of accounts for opening and close dates. What I wish to acheive is to fill a Range of date from the opening to the closing (or up to 200606 YYYY-MM) in another spreadsheet with the account number corresponding to that date next to it.
The VBA I have right now manages to create the list of accounts but up till 2006. It isnt taking into consideration the closing dates of accounts.
So For example What I want is to set up inside of the loop that to continue to do the loop until it reaches the closing date by YYYY-MM so if the clossing date is 200504 I will have data filled up to that date, and if the closing date is "" then fill the dates up til 200606. Ive tried out a number of ways of inserting the if statement but apparently the string create a problem.
Here is my current VBA and a Sample Sheet of what it looks like....
I m trying to set a range on a cell after using the FIND function in a macro and was wondering if anyone had any experience in it.
Basically, I have a spreadsheet which I am looking up a value that i stored in FID1 with the extension "_EXE"
I'm using the FIND command to find that cell and then set a range so that I can mark it but am getting an error....
i have compiled a multipage using some borrowed code and some code i have written myself. most of it works, but i have a problem populating listbox2.the error is in Private subCmbFindAllJobNo_Click(). i have put h1 tags around the line of code which shows the error when i debug. this code works ok as a stand alone, so i suspect i have done something wrong in the userform initialise.
Option Explicit
Dim rng As Range
Const FirstRow As Long = 2
Dim r As Long
Dim ans As Variant
Dim MyArray(100, 4)
Public MyData As Range, c, d As Range
Private Sub cmbAmend_Click()
Application. ScreenUpdating = False
Set c = Worksheets("ENTRY SHEET").Range("b4").End(xlUp).Offset(3, 0)
c.Value = Me.DTPicker1.Value
c.Offset(1, 0).Value = Me.TextBox1.Value
c.Offset(2, 0).Value = Me.TextBox2.Value ..........
