I have a list of cities with a number of entries from each city. I want to rank the Top 5. I have got the Top 5 numbers, using =LARGE($B$6:$B$107,1), but I also want it to list the actual city name (Column A6:A107) in the adjecent corresponding cells next to the numbers.
I have a spreadsheet that has a list in column A 219 rows long. what i want to do is, if possible is move them so that they run accross the top of the spreadsheet as column headings.
Exampl: As is: A B C D E F G 1 ? 2 ? 3 ? 4 ? 5 ? 6 ?
i am trying to create an Array that will print the stock number as a title on row A. e.g. "Stock 1" in A2 "Stock 2" in A3...etc. here is what i have attempted:
I need to count the number of entries made in an column provided it should exclude text values but it should count all the values which is combined of text and numbers ..... I tried count but it's only counting cells containing number....
Ranking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.
I want a dialog box to have a label box reference a cell within a work sheet. This referenced cell contains a formula linked to other cells so it will change value.
I am facing some problem with ranking formulae. Attached is a file illustrating them.
Problem 1: Ranking without zero I have a set of data for products. They have a number next to it. Some of the products have a ZERO value next to them. I want to rank the data in an ascending order while ignoring the products with ZERO value next to them.
Problem 2: Ranking on multiple factors I have a set of data for 50 products. There are 5 factors based on which I want to pick the best and the worst. Each factor has a value which can be a negative number, zero or positive number.
This is what I am doing presently: Ranking the products on each factor in a separate column. Points are assigned based on the ranking, i.e. if the ranking of "product A" on Factor 1 is 32, then it gets 32 points It is assumed that equal importance [weight] is given to each factor, thus average points is calculated based on ranking of each product on each factor. Average points are again ranked in descending order The top & bottom 10 are picked from this ranking.
Number of products and number of factors can be different for each analysis. Presently I am giving equal importance to the rankings for each of the factors, what if I have to give varied importance [weight] to the factors.
I am entering a tremendous amount of data and as I get further doen the spreadsheet I can not always remember the column headings, is there a way to have the headings (Example: product name, code, price, etc) appear at the top of the screen so I do not always have to scroll all the way to the top again.
Second, My commerce system requires a short and long description, I want to have the short desctiption feild grab the first 200 characters of the long description and then follow it up with three periods (...)
I need a column to autopopulate based on quantities of title entered by a user.
Each row has a Type (Column A) and a Sequence # (Column B), and I can get as far validating if a given row has same Type and Sequence# <= the sum of the quantities.
Now I'm struggling with counting down through the quantity of each title.
Each title should exhaust itself before moving on.
I have been given an Excel file. Upon opening it, I see that the top four rows do not move even if I scroll down. What I'd prefer is that only the first row (for column titles) not move. If I can learn the name of this feature, I'm sure I can figure out how to change the file.
I need a functionality in Excel, but I can't get it done. I want to search multiple titles on multiple words.
1. I have a list with titles (tab A) 2. I have a list with words (tab B)
Now I want to scan all titles on words that appear on tab B and return the value of the word.
Example:
Title (tab A - column A) Return (tab A - column B) Words (tab B) BrandX Shampoo Big Shampoo Eau de Toilette BrandX Nailcutter Nailcutter Nailcutter BrandX Eau de Toilette Eau de Toilette Shampoo
So for row 1 the word "shampoo" is reconised in the title and returns this value. Same for the other rows. I need the functionality like the formula below, but then with more words (from a list). I don't want to work with "OR" because the list with word is about 200+ and will be more in future.
It appears that the bar graph automatically turns all dates into the first day of the year in question.
For example, what I have in the source chart is the following 3 dates: 6/11/14, 6/11/13, 6/11/12, however when I convert the table into a bar graph, it changes the dates to 1/1/14, 1/1/13, and 1/1/12.
Here's a snip of the table: Data source.JPG
And here's a snip of the chart: Chart.JPG
I've tried going into the advanced settings and making the intervals fixed (starting at 6/11/12 with 1 year intervals), however it does not seem to change the display.
I have exported a dataset with references numbers and I want to convert those reference numbers into the titles they refer to. I have a separate sheet that matches the reference number to the title and would normally use a LOOKUP function [=LOOKUP(A2,Key::Table 1::A,Title)] to do this but, in this instance, I have multiple reference numbers in a cell separated by commas. How can I get the function to lookup multiple numbers from the same cell?
I am looking for a way to select specific columns in excel that have specific characteristics in the header titles. For example, I have a very large worksheet with columns that specify the year and month (ie. "1900-8"). The years range from 1900 to 2011 and each year has "-1" to "-12" to represent the months of the year. Specifically, I am wanting to pick out all of the columns ending in "-8" (August).
I am trying to create a system to organize my company products. Up until now we had no part numbering system so I created one. The part numbering systems goes as such
Brand Code.Product Code.Bike Code.Color
These are examples
S7R.SF.101.Black S7R.SF.101.Blue S7R.SF.101.Gold
[Code]....
What I would like is to create a formula to expand the part number back to its full length name using tables on other sheets. I have tables for the brand code, product code and bike code. What I would like to have it do is Lookup the first part of the code "S7R" on a column from the following page and return the data from the cell next to it. Then continue on to do the same for the second part "cs" and the third"101" and so forth.
Basically the top example above would expand to be
Strada7 Short Folding Aprilia RSV4 Black S7R = Strada7 SF = Short Folding Levers 101 = Aprilia RSV4 Black = Black
I have a table with 500 rows. Is it possible to make so my header row which actually on row 9 of my excel chart stays visiable as I scroll deep into my rows. This is need due to the fact by the 50 row or so you can no longer see the column titles which makes it harder to fill out the data.
I'm trying to group a year's worth of bank transactions. The initial data that was cut from pdf files is a date, payee and amount
1) how can I search down col A and give the sum of all like Payees, then total each set of similar payees? Maybe if first 6 characters match, then total until it comes to a different set. Total each set.
2) then, I need to assign a category to each set of payees, so if contains usps, then add category "postage"
3) formula to find all postage totals and combine for a grand total per category.
I'm working on a Excel template where 6 cells are filled with text. Now I want to put all the text in those cells into one 'result cell'. I already know how to put the cell values into strings and paste them beneath each other.
My problem is that I don't only want to copy the cell values but also the formatting, because all of the separate cells have a bold title. If I only copy the values the formatting isn't copied with it, so my question is:
How do I copy the cell formatting (bold titles) with it or how can I make a string bold?? Beneath is my code:
I have two sheet one is copy sheet and other is past sheet. In Paste sheet Header Title is fixed values , copy sheet header title also same but its not proper aligned & few header title not available. I want to transfer entire data from copy sheet to past sheet matching with header title. No need to change paste sheet Header title & alignment order.
I have to pull data from a workbook poasted on a Sharepoint site on a weekly basis. The name of the spreadsheet changes each week, based on the date, and may not be consistent (ie: WBook12_4_9.xls, Wkbook12_04_09.xls, WBOOK12_4_09.xls). My users will have the spreadsheet open, and I'll tell them to ONLY have that one open, but how do I tell my macro to pull from that workbook?
I work with several graphs in three Worksheets in a Spreadsheet. I want to use text value 'Home Run', say, from Worksheet#1 CELL $A$5 into my Excel Graph Title; text value 'Score' as Y-Axis titile; text value 'Player Name' for X-Axis title.
Can it be done with Macro or VBS?
Attributes of Title are:
Font 14, BOLD Times Roman Automatic Resizing to sencond line if Title is long (but, less than 127 characters).
I have a worksheet with simple titles of books in a single colum, but want to create a user interface that is like a search engine to show titles.
Just a simple search window and search button. If I have a book named Mother Goose, and the user types in Mother, the search will show every title with that word in it. I have tried to do the advanced lookup I found here but I think I am not excel oriented enough to understand how to use it nor do I think it would do what I am looking for.
I have a set of data which in one column, includes 500 countries, each followed by a list of 43 entries. I want to transpose the data into rows, so that the countries are all in one column, and the 43 entries are in rows as well..
I have a spreadsheet that has multiple sheets and each sheet has a graph, at oresent if i have to add a new sheet and graph i copy the last sheet, rename the tab then off we go, but i alway have to remember to also change the sheets graph title. is a mechanism so that if I change the Sheet Tab name then the chart will use the sheet tab as a chart title.
I have a sheet with about 50-60 charts and I am hoping to have a master list of chart titles on the side, how can I link these titles with the charts themselves?
I am trying to have a column that returns either "secure" or "re-assignable" depending on whether the employees title matches the appropriate office/ space allocation.
e.g. an employee who's title is "CEO" and office type is "Large Exterior Office" would return a secure. However an employee with a title of "Admin Assistant", who's office type is "Large Exterior Office" would return "re-assignable"
I'm looking to automate the process of repeating an excel worksheet (which is set up with various tables and formulas) for various countries.
I have a referenced list of countries set up in worksheet 1. So for example: in worksheet 2 I have a sheet set up for Albania - and I want to repeat this for another 100 countries. . Can I use the reference list of countries to auto-repeat worksheet 2 for worksheets 3 - 102 and auto-title the worksheet tabs? (E.g. Brazil, Canada, Chile..............)
I have quite a long sequence of column for which the headers are all two-lines titles (with a line break). I need to copy many columns that are discontinuous, and the operation would save me a lot of time if I could select them at once. Of course, I know about selecting the columns holding CTRL, but here is the snag: as soon as a two-line title column is selected, the formula bar displays the content of the header, obviously on two lines, and I can't select any more columns. I tried many things, but nothing could solve this...
Is there anything I can do besides copying the columns one by one (which would take a long time) or renaming them?