It appears that the bar graph automatically turns all dates into the first day of the year in question.
For example, what I have in the source chart is the following 3 dates: 6/11/14, 6/11/13, 6/11/12, however when I convert the table into a bar graph, it changes the dates to 1/1/14, 1/1/13, and 1/1/12.
Here's a snip of the table: Data source.JPG
And here's a snip of the chart: Chart.JPG
I've tried going into the advanced settings and making the intervals fixed (starting at 6/11/12 with 1 year intervals), however it does not seem to change the display.
I have a spreadsheet that has a list in column A 219 rows long. what i want to do is, if possible is move them so that they run accross the top of the spreadsheet as column headings.
Exampl: As is: A B C D E F G 1 ? 2 ? 3 ? 4 ? 5 ? 6 ?
Column A | Column B | Column C Los Angeles | Fire Dept | 3 Los Angeles | Health Services | 12 New York | Fire Dept | 8 New York | Health Services | 22 New York | Internal Services | 100 New York | Public Works | 7 Chicago | Health Services | 15 Chicago | Public Works | 56 Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept Health Services Internal Services Public Works Social Services
I have been given an Excel file. Upon opening it, I see that the top four rows do not move even if I scroll down. What I'd prefer is that only the first row (for column titles) not move. If I can learn the name of this feature, I'm sure I can figure out how to change the file.
I have a table with 500 rows. Is it possible to make so my header row which actually on row 9 of my excel chart stays visiable as I scroll deep into my rows. This is need due to the fact by the 50 row or so you can no longer see the column titles which makes it harder to fill out the data.
I have titles in column A and multiple codes per title in column B.
I want all the codes for a single title copied onto another sheet.
I can't use =B1 as the sheet gets updated every week and the amount of codes per title changes.
I was thinking using lookup but the majority of column A is blank and I don't know how to make it look in the row above if blank, or if that is even possible.
Another option would be to look for the title in column A then copy column B until the text "Group Total" which always appears at the end of a titles codes.
I need to set up a graph (smooth line chart possibly) with an (x axis) that are not regular intervals. I've attached an example.
the amounts would be (y axis) and the corresponding dates (x axis).
That would be great to start with. Then I have one of these sheets for each month, can there be a continuous graph made using each month or does it need to be individual graphs.
I wish to plot a Stacked column graph of dates work is completed. Several peoples names along the bottom and dates up the side. The stack shall be broken into 6 steps, each step denoted by the date it was completed.
I would also like a marker at the top of each stack indicating the deadline date.
We have a bunch of 8 digit Purchase Orders (POs) with end dates. We want to show all ten different PO's on a Line graph on the left with the end date at the bottom. Our issue seems to be that:
1. The graph doesn't show the exact PO #, but does a range. We need each PO number listed. How do we get the graph so show each individual PO on the left?
I have a spreadsheet that I'm trying to make a graph that shows the amount of letters mailed in a certain month.
The first line has 01/24/2008 as date received and 01/28/08 as date mailed. I'm trying to make a graph that shows the amount of letters received and mailed in each month. I know there are probably numerous ways to do this but I'm looking for the most effiecent and I would like to be able to update the same spreadsheet and have the graph update as I add information.
I have a dashboard which has dropdown boxes to pick out the data you want to see. From this data i then have graphs which are graphing 0s from the data making the graph look horrible.
I know I need to add NA() to the cells so that 0s dont graph, but all my data has formulas in and i don't know how to add the NA part to the existing formula.
my formula for each cell is =IFERROR(VLOOKUP($A9,'DB data'!$A$1:$HH$2003,COLUMN(FP1),FALSE),"-")
This looks up name such as "sign on time", then goes to another sheet and retrieves the data.
Where can i add the NA part. I've tried instead of the "-" at the end but doesn't work. and ive tried instead of FALSE and this stops the formula from working.
What I have done is entered code to auto generate the date in column O whenever data is entered or altered in column A. Here is that code:
VB: Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("A:A")) Is Nothing Then _ Target.Offset(0, 14).Value = Now
End If End Sub
What I am trying to do now, is create a column that will take the information from O and do a sort of COUNTIF function that will count how many items of data were entered on a certain date by the day. For a clearer example, I want it to tell me how many items were entered/altered on 7/23. But I also want it to continuously calculate it for each date after that. Preferably automatically, but if a macro is needed I can create an update button.
Once it can achieve that I would like to create a dynamic graph that will automatically (or via macro button) update to show the last 5 days. It should display the date and how many items were entered that day.
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them. note some are on the left and some on the right.
I have a sheet named "XYZ Activity" with meeting dates in column B starting with cell B4. There are duplicates in this list, that should only be viewed as one meeting. On another sheet, each company that attends the meeting has a specific join date found in Column C (C4 is the first company start date). I am trying to figure out an equation that will count how many meetings the company could have attended. I already calculate the total meetings they have attended using either of the following equations:
Is there a way to make the bar on a vertical column bar graph increase in height gradually over a couple of seconds rather than jumping from one height to the next height instantly.
eg:
if a vertical bar graph is reading data from cell b5, and b5 currently reads as 46, if b5 then changes to (let's say) 58, I'd like the column bar graph not to instantly change from a height reflecting the 46 to a height reflecting 58, but to slowly rise, showing the transition from 46 to 58.
I have a data set consisting of three columns. Column A is a name, B is an x-axis value, and C is an y-axis value.
I use the B and C column to plot the positions in an X/Y point diagram. This is working nicely. But is there a way for me to get the value in the A column as the label for the data? Or in some other way shown with mouse over or similar?
I would like to make a graph in Excel, where I present both a stacked column and a line with two different axes. Including a clustered column and a line in the same graph with two different axes is easy, as this combination can be found in the custom types selection in the chart wizard. However, there is no such alternative as a stacked column and a line with two different axes. Is combining the two manually possible?
Anyway, I have a column graph that shows company totals on the left, in three columns, and sub-group totals to the right. These columns represent Revenue Targets (Blue), and current projections (Red) as of the current time. Ignore the green column. I would like to add incremental amounts to the Red column weekly, as the projections change. So I want to show an increment on top of the red column.
So if LG picks up 100 of additional revenue, I want to show the increment of 100 on top of the 2000 that is there, using a different pattern or cross-hatch.
I'm trying to figure out a way to group columns in a bar graph without displaying them in a cluster, but instead in displaying them individually in a specific order. However, I still want to identify each group with a different color. This is hard to describe, so I'll try my best to illustrate what I'm trying to do with an example. Assume I have three groups of data and within each group I have 2 to 3 items in it with different values. In a list the data would look like this:
Group 1 - Item 1 - $2,000 Group 2 - Item 2 - $1,100 Group 1 - Item 3 - $2,200 Group 1 - Item 4 - $3,200 Group 3 - Item 5 - $1,800 Group 2 - Item 6 - $1,200 Group 1 - Item 7 - $2,500 Group 3 - Item 8 - $2,800
What I want to do is create a bar graph that will still allow me to color all group 1 items as red, all group 2 items as blue, and all group 3 items as green while still showing each bar sorted in the order I've shown above and labeled as items 1 through 8. Then, I want a legend to only show the groups 1 - 3 with their colors. To explain, the graph would look like this:
Bar 1 would be labeled as Item 1, with a value of $2,000, and colored red Bar 2 would be labeled as Item 2, with a value of $1,100, and colored blue Bar 3 would be labeled as Item 3, with a value of $2,200, and colored red Bar 4 would be labeled as Item 4, with a value of $3,200, and colored red Bar 5 would be labeled as Item 5, with a value of $1,800, and colored green Bar 6 would be labeled as Item 6, with a value of $1,200, and colored blue Bar 7 would be labeled as Item 7, with a value of $2,500, and colored red Bar 8 would be labeled as Item 8, with a value of $2,800, and colored green
Then, the legend would only show the groupings of Group 1, 2, 3, 4 and their associated colors.
(By the way... I know I can do this manually by selecting each bar and customizing the color, but I want an automated way of doing this to reduce maintenance time)
A colleague recorded this macro to insert a row into a column of data which a graph is plotted from to automatically update the graph each time more data is added. I can't figure out how to simplify the VBA and stop it adding a row on row 57 rather than the bottom of the graph.
Is there a way to make multiple charts off of 1 big data sheet. Sounds easy but there is more.
Sheet name is Field Column A is Name ( about 40 different names) Column B is Date (x axis primary and secondary) Column D is Oil (y primary axis) Column G is Water (y primary axis) Column E is Gas ( y secondary axis) Column M is MCFE (y secondary axis)
There is about 2-3 thousand rows, updated monthly. I need to make a graph by each well name.
1) can I make multiple graphs that can just look at the "field" sheet and then breakout just the 1 well name that shows up on the chart sheet that I create
I've tried pivot charts but you can't have secondary acess because it resets every time.
Basically, make multiple charts that will graph the data of a specific name in column A
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
I am entering a tremendous amount of data and as I get further doen the spreadsheet I can not always remember the column headings, is there a way to have the headings (Example: product name, code, price, etc) appear at the top of the screen so I do not always have to scroll all the way to the top again.
Second, My commerce system requires a short and long description, I want to have the short desctiption feild grab the first 200 characters of the long description and then follow it up with three periods (...)
I need a column to autopopulate based on quantities of title entered by a user.
Each row has a Type (Column A) and a Sequence # (Column B), and I can get as far validating if a given row has same Type and Sequence# <= the sum of the quantities.
Now I'm struggling with counting down through the quantity of each title.
Each title should exhaust itself before moving on.
I need a functionality in Excel, but I can't get it done. I want to search multiple titles on multiple words.
1. I have a list with titles (tab A) 2. I have a list with words (tab B)
Now I want to scan all titles on words that appear on tab B and return the value of the word.
Example:
Title (tab A - column A) Return (tab A - column B) Words (tab B) BrandX Shampoo Big Shampoo Eau de Toilette BrandX Nailcutter Nailcutter Nailcutter BrandX Eau de Toilette Eau de Toilette Shampoo
So for row 1 the word "shampoo" is reconised in the title and returns this value. Same for the other rows. I need the functionality like the formula below, but then with more words (from a list). I don't want to work with "OR" because the list with word is about 200+ and will be more in future.
