How To Copy And Paste To Another Sheet By Matching Titles
Jun 24, 2014
I have two sheet one is copy sheet and other is past sheet. In Paste sheet Header Title is fixed values , copy sheet header title also same but its not proper aligned & few header title not available. I want to transfer entire data from copy sheet to past sheet matching with header title. No need to change paste sheet Header title & alignment order.
Attached File: Data Transfer.xlsx
View 3 Replies
ADVERTISEMENT
Apr 17, 2014
I am trying to have a column that returns either "secure" or "re-assignable" depending on whether the employees title matches the appropriate office/ space allocation.
e.g. an employee who's title is "CEO" and office type is "Large Exterior Office" would return a secure. However an employee with a title of "Admin Assistant", who's office type is "Large Exterior Office" would return "re-assignable"
View 1 Replies
View Related
Jan 6, 2014
I have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
View 5 Replies
View Related
Aug 27, 2012
I am trying to paste data from one sheet to another using their string but not getting the logic.
below is the example for the same.
Sheet1 - data source
A
B
C
ABC
56.32
45.65
DEF
26.5
23.6
Sheet2 - Data needs to be pasted
A
B
C
DEF
23.65
36.65
XYZ
23.65
12.65
PQR
15.23
25.65
ABC
65.59
65.26
MNL
26.65
23.65
Value contains in Column B and C for ABC & DEF should replaced by the values in Sheet1
View 1 Replies
View Related
Jun 11, 2013
I have two worksheets to combine. One of them have list of student numbers and their names, and the other has student number and their grades. I have to make another sheet that shows their name matched with each of their grades(grades are organized by date)
My thought process in this is to match the student numbers in two sheets, then combine name and grades and paste to another sheet.
How can I do this using VBA macro code?
View 7 Replies
View Related
Feb 8, 2014
This follows on from my previous posting [URL] ..... which produced a solution using an ActiveX Combobox that unfortunately does not work on Mac PCs!
I tried to replace the ActiveX with a Form Control Combobox but could not make it work.
So I am trying to use the alternative of "find, copy and paste" the relevant information.
As shown on the attached 140207 FINDALL test.xlsm, I need to find all records containing whatever string is entered into the "Search" cell, and copy data form three columns onto the Entry sheet.
The User will then select whichever of the entries they want to use, which will populate the relevant cells.
Problem: The following Code is not recognising any of the data in the Column being searched.
VB:
Option Explicit
Sub FINDPARTS()
Dim ws As Worksheet, i As Integer, k As Integer, z As Integer, CL, myFind, CHOICE As Range, lr As String, lrG As String,
[Code] ......
View 2 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Jan 17, 2008
I'm trying to eliminate any .select or .activate from my code to speed things up and reduce screen flicker. At the moment, I have a sheet created at the click of a button. Basically for every date exclusive of weekends, there are 4 entries, for each date there are the following entries AM Metro, PM Metro, AM Regional, PM Regional. The user wants to be able to change the date range in the "overview" sheet and when there is data already in the other columns for these matching rows, have the input sheet update with old (copied??) info, if no previous data then add all 4 rows and sort... if previous date not in date range then delete entire row.
View 4 Replies
View Related
Oct 5, 2009
I have a userform in a workbook and depending on what selection the user makes from a combo box, I want the data to get pushed into the relevant sheet.
I did think I could get away with
If Me.cmbtype.Value = "Tool" Then
Set ws = Worksheets("Tools")
ElseIf Me.cmbtype.Value = "Guide" Then
Set ws = Worksheets("Guides")
etc but its now not copying data into Tools if I selected Tool from cmbtype (but when I select Guide it does appear to work).
The rest of the code is the same regardless of what type they select from cmbtype, its just which sheet the data gets copied into that changes.
View 9 Replies
View Related
Feb 4, 2008
I need to track only certain tasks id's out of entire task id database. I have 1 column of data on sheet "A" that represents task id's I want to track. On sheet "B" I have multiple columns of data, the first column being the task id's. I need to compare the column on sheet A with the first column on sheet B. If there is a matching task id, I need to copy the entire row of data from sheet "B" on to a new sheet "C". If there is no matching task id on sheet "B", I would like to copy just the task id. Each week I would get a new set of data for sheet "B" (which can vary in length) and I need the ability add or subtract task id's on sheet "A" that need tracking. See the attached xls file for a piece of sample data.
View 4 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
May 22, 2007
I have a spreadsheet that has a list in column A 219 rows long. what i want to do is, if possible is move them so that they run accross the top of the spreadsheet as column headings.
Exampl:
As is:
A B C D E F G
1 ?
2 ?
3 ?
4 ?
5 ?
6 ?
After:..................
View 4 Replies
View Related
Feb 1, 2014
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
View 8 Replies
View Related
Jun 1, 2008
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
View 9 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Apr 24, 2014
I'm working on a Excel template where 6 cells are filled with text. Now I want to put all the text in those cells into one 'result cell'. I already know how to put the cell values into strings and paste them beneath each other.
My problem is that I don't only want to copy the cell values but also the formatting, because all of the separate cells have a bold title. If I only copy the values the formatting isn't copied with it, so my question is:
How do I copy the cell formatting (bold titles) with it or how can I make a string bold?? Beneath is my code:
[Code] ....
View 12 Replies
View Related
Sep 12, 2008
I work with several graphs in three Worksheets in a Spreadsheet.
I want to use text value 'Home Run', say, from Worksheet#1 CELL $A$5 into my Excel Graph Title;
text value 'Score' as Y-Axis titile;
text value 'Player Name' for X-Axis title.
Can it be done with Macro or VBS?
Attributes of Title are:
Font 14, BOLD
Times Roman
Automatic Resizing to sencond line if Title is long (but, less than 127 characters).
View 9 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Jan 9, 2008
I have a spreadsheet that has multiple sheets and each sheet has a graph, at oresent if i have to add a new sheet and graph i copy the last sheet, rename the tab then off we go, but i alway have to remember to also change the sheets graph title. is a mechanism so that if I change the Sheet Tab name then the chart will use the sheet tab as a chart title.
View 2 Replies
View Related
Aug 21, 2014
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
View 6 Replies
View Related
Apr 3, 2007
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
View 9 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
May 25, 2014
I have a column of Data (A1:A20584) that includes information for different contacts
BEGIN
VERSION
N
FN
TEL
TEL
EMAIL
ADR
ADR
ORG
END
I need the information to list as Row Titles (horizontally) so I can sort. I hope I am saying this correctly.
View 2 Replies
View Related
Aug 6, 2014
I'm looking to automate the process of repeating an excel worksheet (which is set up with various tables and formulas) for various countries.
I have a referenced list of countries set up in worksheet 1. So for example: in worksheet 2 I have a sheet set up for Albania - and I want to repeat this for another 100 countries. . Can I use the reference list of countries to auto-repeat worksheet 2 for worksheets 3 - 102 and auto-title the worksheet tabs? (E.g. Brazil, Canada, Chile..............)
View 2 Replies
View Related
Jul 29, 2014
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
View 3 Replies
View Related
Mar 11, 2014
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies
View Related
Jan 20, 2009
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies
View Related