I'm working within a nested FOR loop. If you notice when I'm Assigning "ECD" I'm trying to average the cells from J (which is row 1) and column 11 to column 12. It keeps on telling me "Application-Defined or object-defined error".
Code:
Sub copytab()
Dim WSName As String
Dim NumbSheets As Integer
Dim NextRow As Integer
Dim i As Integer
[Code] .......
I have a sheet with columns for the transport number, the invoice for the each good transported, the freight for each good and the weight.
Problem is, the weight is the total weight of the goods in each transport.
I need a macro that creates a new column that divides the weight based on the freight cost for each invoice in each transport - a weighted average.
I am trying to create a For Loop where the RND from array column sptemp(i,2) is static throughout the entire loop when I pull the data out separately by columns to create a chart. The data works perfectly if I print it out on the excel spreadsheet via ctrl+shift+enter as an entire array but I am trying to graph the columns and the RND is updating and not syncing with the same random number, as sptemp(i,3) and sptemp(i,5) are both linked to sptemp(i,2) which is the RND. I am trying to graph column 3-5 on the Y-axis and column 1 on the X-axis, and column 3 and 5 should look identical after subtracting column 4.
View 1 Replies View RelatedLastRow = Worksheets("Sheet1").Cells(Rows.Count, "K").End(xlUp).Row
For i = 2 To LastRow
Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
If (Worksheets("Sheet1").Range("AE" & i).Value < 1.5) And _
((Worksheets("Sheet1").Range("K" & i).Value > 0) Or (Worksheets("Sheet1").Range("L" & i).Value > 0)) Then
Worksheets("Sheet1").Range("AE" & i).Font.Color = 255
End If
Next i
My loop here works just fine, and my Formula works in testing. However when I move my formula inside the loop I get an error.
Is the syntax wrong in this line = Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
I want to use the function VLOOKUP at my VBA program inside a FOR Loop
View 3 Replies View RelatedI have this loop, I get a range of specific cells and then I loop over this collection searching for a value, if this value exist I wanted to move one place to the right and then set a value on that cell, but for some reason when I put this offser(0,1) parameter, the loop became infinite, not sure why the code is doing this:
Code:
For Each c In Worksheets("Parameters").Range("A3:AR3").Cells
adress_start = ""
adress_letter = ""
[Code].....
The following bit of code has worked for me but when it goes back for the next b it still finds the address as $j$13. This address does match the criteria I want but what I want the programme to do is move to the next address matching the criteria in the range...
View 4 Replies View RelatedI have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3
here is my main loop A1 = 5000
and second loop need to run inside the this loop
Sheet1.Activate
i = Range("A1")
For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b
I have a table where sometimes cells are merged. To the right they are not merged, but I need to link to the value of the merged cell. How can I do it if I don't want to do it manually?
Example:
Say A1:A4 is merged, A5 is just normal. I want a formula using those values, say in B1:B5. Now just filling down the formula would reference A1, A2 and so forth. This is wrong.
I'm trying to use the contents of a cell as a range in my code
Private Sub CommandButton3_Click()
Dim Target As Range
'the cell containing the contents i want
Range("P11").Select
Target = ActiveCell.Value
Range("P9").copy Target
End Sub
Does it read in the value as a string? If so how do i get around this?
I have an excel file connected to a digital reader. Values are inputted to cells. What I can't figure out is the formula to automatically insert the values into the desired cells.
In short. First value goes to A1, 2nd value goes to B1. There's a formula (=A1-B1) in C1. The 3rd value from the reader should go to A2. The 4th value to B2. The 5th value to A3 and so on. I believe that I should be putting a formula into B1,2,3..n. What I can't figure out is that formula.
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
how can I use a formula via VBA instead of putting it in the cell itself? It is causing me problems because when I put a formula in a entire row, all the cells five me the number ZERO, when I want them to stay without any number until I input something in the other row's cell in the same line. I will give an example: I would like that anytime I entry any number in a cell in column A the cell in column C will give me the number in column A times the number in column B (which is a variable daily updated via an internet connection), and when the cell in column A becomes "null" (that is when there is no number in the cell, not even a zero) the cell in column C also becomes null.
When I try to do it using formulas in the cells I always get a ZERO in all the column cause they read a 'null' as a 'zero'. Trying it using VBA I have some success but still have problems. I tried this code
If Target.Column = 3 Then Cells(Target.Row, 8) = Cells(Target.Row, 3) * Worksheets("Sheet4").Range("d32").Value
But it makes the cell in column 8 be static and change only when I click on the cell in column 3. I need it to change automatically when the number in D32 is changed too. As a formula in the cell would do.
is there any way to input a formula via VBA, how?
I've been trying to loop data for column A from row 1 until 6 and print the result on specified cell. But the problem is, it keeps looping until column B,C and D.
I want to calculate average result separately for column B,C, and D without taking the previous data.
Here is the code that I've done.
VB:
Sub Avg()
col = 1
Row = 1
Do
Name = ThisWorkbook.Sheets("Sheet2").Cells(Row, col).Value
If Name <> "#" Then
[Code] ....
I attached my excel. The green box indicate the result that I want : function.xls
Is there a particular function which will allow me to count particular names inside cells, e.g, in cell A1 there are three names(Ben, Jack, Tom), cell B1 (Jane, Tom, Andy). I'm looking for a formula which will count the number of occurrences of Tom in cells A1 and B1.
View 3 Replies View RelatedI have a list of tasks/rows with completion rate from 1-100%. I would like to display this rate information through individual tiny bar charts linked to each cell value. I managed to do it by formatting and resizing a chart appropriately. However, i don't know how to proceed to copy and paste the chart for all rows without having to edit the data series individually.
View 9 Replies View RelatedI am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI have 4 cells with simple data in them. In another cell, I would like to make a phrase and include all the data from the 4 cells in that phrase.
Example:
="Jackpot: &G2 (&G1) / &G3 = &G4 each"
I already tried this:
="Jackpot: "&G2" ("&G1") / "&G3" = "&G4" each"
Am I missing something? I'm pretty sure this is doable, I just don't know what's missing.
I am making a buiness card request form, which I have attached. On the Master Sheet (Sheet 1), the user enters in his/her personal data, such as his name address, phone number, etc. After he/she finished entering all the relevant data, Business Card Layout (Sheet 2) automatically populates and shows the user what their business card will look like.
Everything works fine, however I just realized that the contact information might vary from person to person. Right now, a person can enter 5 different contact information, but most of them will probably only choose four.
I wanted to know how to shift the cells down if the user does not fill out one of the contact information.
I'm trying to generate an email out of my spreadsheet and use cell values to populate the email.
The issue I'm having is once of the cells (D17) has multiple lines in it, created by using Alt + Enter; and this formatting doesn't appear in the html body of the email.
[Code] .....
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder)
The name of the templates are: "Standard" and "Other".
I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done.
One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
I want to know how to display part of a cells text value, inside another cell.
Suppose in cell A1 i have "20-Jun-14"
How would I get cell B2 to display just "Jun"?
What I want to do is Average out a range of cells "F4:F343". That's the easy part =average(F4:F343). However I want to exclude any numbers for that average if data in coloumn "Q" = "FMC"
Would that look anything like:
=average(F4:F343)/countif(Q4:Q343, "<>FMC")
I'm also displaying it as minutes in a day so i added *24*60 to the end of the formula and formatted to Number/.00. I've entered the formula and it will calculate but when i enter FMC to the appropriate area the average wont change.
I have a macro which autofilters a range of cells.
I can count the number of visible rows by using the following code
Code:
lcountActive = Range("BC34:BC" & x).SpecialCells(xlCellTypeVisible).Count
What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.
I'm using the following code to read in any number of CSV files into a single worksheet and concatenating them together
View 2 Replies View RelatedI'm trying to write code that looks at the range W(rowid):Z(rowid) and lists each cell value in a listbox. The row id is coming from the listindex of combobox1. I know the rowid part is correct and working because other operations in my worksheet are using it fine. Here's what I've written so far:
With Worksheets("DATA")
For I = 0 To 4
ListBox3.AddItem .Range("W" + I & rowid)
Next I
End With
I have 1300 vertical cells.
Is there a quick way to get the average of every ten cells? i.e. to end up with 130 averages of successive groups of ten cells (cell 1-10, 11-20, 21-30 etc.)?
In sheet 1 data 123. In sheet2 there is also data 123. In sheet3 will automatically data that is same 123 after reading sheet1 & sheet2. Any data with figure that is same in sheet1 and sheet2 will be reading in sheet3.
View 4 Replies View Related