I am attempting to setup a spreadsheet that summarizes data from a set of other workbooks. The woorkbooks the data comes from is different for each year. However, I would like to have just one summary that can be changed based on the year entered.
In B1 the user enters the year. Say 2012
In the bulk of the spread sheet below the cells refrence ='C:...["&B1&" Pt. Visit Stats.xlsx]Summary'!$B$6
As I am sure many of you can guess I am getting a #REF! error. I just do not see why it shouldn't work.
I do not want to use the indirect function, because the refering workbooks would need to be open to draw data. I am guessing that I will probably need to research the Harland Grove Pull VBA work or more likely include a copy of Morfunc and then use the indirect function. But, I though I would ask here first just in case I am missing something relatively simple.
I'm having trouble keeping the formatting correctly in a text box through VBA. I'm sure this is something simple, but I'm the intern that got stuck with trying to program for the break since they know I've taken classes on the subject. I've been able to figure out a lot
End goal: To have the first word of a text box larger, underlined, and bolded. Problem: It only formats it Calibri at 24 point with no special formatting as indicated in the code.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
I have values on master sheet and want to link those values to source documents in the same workbook. But the values on master sheets are made up of more than one value on another sheet.
For example on master sheet I have $137,000 that is made up of values in P7 + Q7 + P57 + Q57 on source sheet. If user wants to see where this number is coming from; the user will click the number to go to source document.
On a single valve I linked to the source sheet to a single cell. One thing I was thinking, using conditional format, so if one of the cells is selected in source document the other cells that combine the total of the master sheet cells should be highlighted, just my 2 cents.
I'm trying to take the sum of multiple cells and return it to one single cell using the Vlookup
For Example I want to match the ID numbers from one spreadsheet and use the list of codes to return the value of the sum of all matched numbers. So in this example I would want the number 65 in one cell...
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
At work, we've got a program that outputs the results of a search into an Excel file, in column 1 below.
17,43,61,63 17 43 61 63
23,29,53,57,77,79 23 29 53 57 77 79
17,29,63,69,71,75,79 17 29 63 69 71 75 79
11,43 11 43
I need to get that list of numbers listed out to the right, with one number per cell. The list in column one could possibly contain from 1 to 20 numbers, and the last number is always without the comma after it.
Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type  in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.
I've tried to a create code from examples in previous posts but I can't seem to figure out how to get what it is that I'm looking for.
I'm trying to reference the value in cell O9 which would be a number.
Preceding this value, I would like to have the word "Rev" displayed. Just underneath those values, I would like to reference the value in O7 which is a date (3/27/2014 for example). I would like the footer to be updated anytime that cells O9 or O7 are updated.
These values would be placed in the right side of the footer of the active worksheet, and be displayed on each page that is printed out.
My current worksheet is being built for use in Eve-Online, a game I play. In specific, I am keeping track of profit made by manufacturing different items in the game. I am trying to build it like this:
Column 20 is a list of items, and the next 7 cells to the right of each item contain the mineral requirements for that item. So C20 says Bantam Frigate, C21-C28 will all contain numbers. Now, I am trying to create a function in the upper-right cells (like A1-A8) where if I type in "Bantam Frigate" into A1, A2-A8 will fetch the numbers that I put into C21-C28.
Now, I will be working with thousands of items, so I have to make sure I name both the 'database' and the query exactly right, but that's not a problem to me. Can I make something that will reference a value from (cell+1 column right) or (cell+2 columns right)
I have multiple sets of data that i need to reference based on the value in another cell. In this instance I am importing data to Excel from an outside source, this data is not consistent each time I import it and therefore based on the values that are imported I need to reference different cell ranges. Here is an example:
Import Data A B Alex 1 Ben 2 April 2 Harry 3
Data Sets Alex Data Range 1 2 3 Refine Help Token Cover Safe Coin Simple Aware Change
Ben Data Range 1 2 3 Sorry Away Candy Happy Home Soda Mad Neutral Water
My problem is that based on the name in column 1 of the import data I need to reference that data range so I obtain the correct column of Alex's data range with a random chance of any item in the column to be selected. Currently my formula looks like this: =INDEX(CELL("contents",A1),RANDBETWEEN(1,3),B1) and it is returning #VALUE, however when I put the Range Name "ALEX" in in place of the "CELL" formula it works properly the problem is I am not able to put the correct name in for each row.
I'd like to apply multiple formula to a set of cells on a summary page. My summary page also contains 3 variable dropdowns, and I'd like to display data based on the text selected in those dropdowns (pulling data from 2nd tab "Variables")
The following formula works in the first instance:
=IF(AND(H4="Product Type A1", H6="External", H8="Existing"), Variables!C4, 0)
What I'm struggling to do is add additional formula to the same cell in order to deal with the remaining eventualities of the drop down variables:
Variable 1: Product Type A1 Product Type A2 Product Type B1 Product Type B2
I would like to know if you can point (lots of ) cells to use a formula specified once somewhere else. The problem I have is 6 large formulas duplicated down 6 columns for 7000 rows. This, it turns out has made my file size huge ! Instead of duplicated the formula, can I tell all the cells to use *this* formula, but remembering to increment the references within...
I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
Find Multiple instances of Numeric Criterion in Row & Return To a Single Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows. Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across each single Row in the Dynamic Range "Data" and have the Results returned to a New Sheet in a single column.
NEW Sheet: The Numeric Criterion is housed in G5. The matched criterion should be returned to the New Sheet starting at G7. Duplicate instances in the same Row should ALL be returned to the same cell in Column G on the New Sheet.
Sample Data Layout: Columns I J K L M N O P Q R Row No.76 1 0 1 1 0 1 1 1 0 1 Row No.77 2 2 3 2 1 2 2 0 0 0 Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario: Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet: Row No.7 Column G (Cell G7) 1111111 Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be returned to the same cell G7. In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it should be returned to cell G8.
I am looking for creating a dynamic meeting log/calendar for my team. There's a couple of elements to my questions below:
I have a log with columns such as "Meeting Date", "Client", "Attendee" and have also set up month calendars on separate tabs which automatically update the dates according to a "Year" toggle using Janoffset, Feboffset, etc.
What I would like to do is have these calendars automatically populate a cell beneath each date with any meetings on that day. The client name and then a space then the attendee in brackets would be sufficient and with each meeting having its own line in the cell).
I have gotten a Vlookup working but have run into two snags: 1) where there is more than one meeting on a single day 2) I can only return one piece of information in the cell or otherwise have it blank, I can't have the client name AND attendee.
Is there any way to lookup all of that information in the one cell or is this just a pipe dream?
I have attached my workbook which contains my workings so far and in the first cell of Jan shown the "ideal" format. I'd like the data in.
The following IF statement isnt working, so im missing something. If A2 says YES, i want the cell with this statement to be blank. However, if A2 has a date, I want this cell to be that date + 45 days. How can I make this correct?