Refer To A Checkbox Value By Vba
I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window
View Complete Thread with Replies
Related Forum Messages:
VBA To Refer To Outlook
In Excel, I want VBA to refer to the SENT ITEMS folder in Outlook. I want to loop over all sent items, and if the email address satisfies a condition, then record that fact in Excel. I am good at VBA in Excel, and I have a passing knowledge of VBA in Outlook, but I don't know how to refer to Outlook within my Excel VBA.
Refer To The Last Row In A Selected Area Using VBA..?
I'm trying to do is add a signature box (for inventory-taking accountability) directly below the pasted area after I paste it. Now, of course, the copied and pasted area could have 5 rows or it could have 15, and when I copy it from the first sheet and paste it into the second it doesn't preserve the name of the range on the second page, so what I really need to do to add the signature box directly below the last row in the pasted area is specify the location in relation to the last row in the pasted selection, but I don't know how to do that. Using ActiveCell always refers to the top-left-most cell in the selected area. So...
If I have an area selected, how do I refer to the bottom-right-most cell in that selection (in the same way that ActiveCell refers to the top-left-most cell)? Or at least the bottom row? Or, even better, the row below the bottom row?
Refer Folder/Filename In VBA Code Through Named Cell Reference
I have the following codes in which I am to refer a file and folder to do some further processes.
myfilename = "C:Documents and settingsacsMy DocumentsEntrymyfile1.xls"
folderPath = "C:Documents and settingsacsMy DocumentsEntry"
I want to enter these two paths in a sheet in my excel report file (For example, I am running the report from Report1.xls, in which there is a sheet name "Filepaths". In this,
in B5, I would like to enter the Filepath (B5 named as "FILEPATH")
in B6, I would like to enter the Folderpath (B6 named as "FOLDERPATH")
So that, if I am copying the folder to another area, I no need to change the code every time in the VBA editor. I can do changes in these cells and it will be taken as the path to run the code further.
Disable Checkbox In VBA
I have a sheet with a number of checkboxes, and I need to conditionally enable/disable some of them.
For example, if the user checks Box1, then the question for Box2 becomes relevant and Box2 becomes available. If Box1 is unchecked, Box2 needs to be unchecked and disabled.
Command For Checking A Checkbox In VBA
I have a worksheet with a series of checkboxes. I'd like to run a macro that would check SOME of them and then uncheck them.
I tried recording the macro first, but the recording did not recognize me checking the checkbox. I also tried writing a VBA script that would add a space (" ") to that checkbox and that seemed to work but not optimal for adding the check makrs back in.
Checkbox Creation - Vba Code
I just realized that after create 1200 checkboxes using VBA then excel will prompt an error. Something like object automation bla...bla....bla. What Is the shortest code with VBA to create 2000 checkboxes? I run copy paste function with VBA but seems not working well.
Refer To More Than One Workbook
I'm using this code to open another workbook:
FileToOpen = Application.GetOpenFilename _
(Title:="Please locate BlankSAMSRegister.xlsm", _
If FileToOpen = False Then
MsgBox "No file specified.", vbExclamation, "Error"
Once this second workbook is open, how do I refer to each one within the subsequent code?
I really need the parent workbook to be named as wb1 and the child to be names wb2 so I can flick between the two in the next macro... I can get the parent using thisworkbook.name, but how do I get the child?
Refer To Cells That Move
In my current spreadsheet I use Offset to change the values of various cells. The problem is that if I make any changes to the columns it throws the whole offset thing off. So, instead of using offset to paste all the data is there an alternative that would work better?
I was thinking maybe I could name a column as a range and then have the cell in that row equal a value.
What solutions are there?
ActiveCell = TextBox1.Value
ActiveCell.Offset(0, 1) = TextBox2.Value
ActiveCell.Offset(0, 2) = ComboBox9.Value
ActiveCell.Offset(0, 3) = ComboBox2.Value
ActiveCell.Offset(0, 4) = ComboBox3.Value
ActiveCell.Offset(0, 5) = ComboBox11.Value
ActiveCell.Offset(0, 12) = ComboBox1.Value
ActiveCell.Offset(0, 13) = TextBox6.Value / 100
ActiveCell.Offset(0, 16) = TextBox4.Value
ActiveCell.Offset(0, 17) = TextBox5.Value
ActiveCell.Offset(0, 18) = CostBasis
ActiveCell.Offset(0, 19) = NumberOfShares
ActiveCell.Offset(0, 59) = DividendFreq
Refer To Previous Sheet
I've got a workbook that increments in sheets for each new week. I have a cell showing the current week number for that sheet ( lets say cell C1) and any formulas that need to reference data from the previous sheet do in 'indirect' function which basically looks at the current week number ( lets say week 20)in cell C1 and minus's 1 to navigate to the previous week (week 19).
I was wondering if there was a way to reference the previous sheet purely by the order they're in.
So say i have 5 sheets named "1,4,5,8,9" and these represent week numbers so the sheet named '8' in cell C1 would have '8' standanding for the week number but cells that wanted to reference the previous sheet couldn't do the 'indirect' C1-1 as there is no 'week 7'.
The weeks used could vary alot so a formula to reference the directly previous sheet is needed.
ok, thought best if i show you the actual formula
the '$A$G2-1' part is the bit that redirects to the previous sheet based on it's name, what i think i really need is to replace this part with a 'PrevSheet' function but i'm unsure how.
New Lines To Refer To Different Sheets
A2 refers to a linked cell but I have tried without the link there still no joy. Together they would generate for example "DCA_RES" which would refer to a column range in a different sheet on the same workbook.
I want this to work so that I can implement more easily new lines to refer to different sheets. (Drag to copy) instead of having to copy and edit a formula 100 times.
Using INDIRECT For Column Refer Only
Let's say I have a formula in cell A1 that is =COLUMN(L5). So cell A1 returns the result 12 (for column L).
I now want to create an index formula in another cell:
=INDEX(C1:C12, ........), but I want the 12 in C12 to be picked up from the result of cell A1
So, I tried various things like =INDEX(C1:C&INDIRECT(A1)....etc but I can't work out the correct way of doing this.
Formulas Refer To Other Tabs
The "summary" tab will be calculating 20 statistics for each of the 30 or more tabs. In an effort to automate this - can I replace writing "January!" with a cell reference? For example;
instead of writing = sum(january!a:a). Could I write = sum("A1"a:a), with the A1 Cell = january!. Obviously I tried this and it does not work but I am not sure if there are other options.
Indirectly Refer To Function
I'm trying to call a function that is stored in a cell as a text string. In cell A1, I have the text Sum('Sheet1:Sheet3'!C3). I want to call this function from a different cell. Is this possible using the pre-defined functions, or would I be better creating my own function?
Refer To Objects In Other Forms
I'm trying to refer to a togglebutton in a form from a command button in a different form.
Right now I have
Private Sub CommandButton1_Click()
If ToggleButton1.Value = True Then
but I assume I have to preceed the Togglebutton1 with the name of the form that it is in but I am not sure how.
I don't even know if the above code will work as obviously I haven't got that far yet...it may be completely off...
Variable To Refer To A Worksheet.CodeName
This is a simplified version of an earlier, long winded post that clouded my actual question.
Can I use a variable to refer to a worksheet by its CodeName? For example, let's assume I have several worksheets, with CodeNames of mySheet1, mySheet2, mySheet3, and so on. I understand that I can refer to them directly,
mySheet1.Range(myRangeName).value = someValue
mySheet2.Range(myRangeName).value = someValue
mySheet3.Range(myRangeName).value = someValue
but what if I want to do this using a loop? Is it possible to preload an array of CodeNames and do it that way? I'm thinking along the lines of something like...
CodeNames = Array( mySheet1, mySheet2, mySheet3 ...)
For x = 1 to HoweverMany
CodeNames(x).Range(myRangeName).value = someValue
Ignore Day And Only Refer To The The Month?
The summary page summarises the source data into how much revenue each department has made over 12 months.
However the formula in Summary worksheet column B will only total up the amounts if the month in the Source worksheet column B is the 1st of the month. How do I change the formula in Summary worksheet column B to purely go by month and ignore the day?
Refer To File Opened By User
I am trying to refer to an open file in VBA script.
The script below is asking the user to open a file from which data is copied. I am trying to refer back to this open file but as the file name and path are not mentioned in the script, I am not able to.
myMsg = "Please Select Euromcontact Master DISTOPS File"
Response = MsgBox(myMsg, vbExclamation + vbOKOnly, myTitle)
sFileName = Application. GetOpenFilename
Sheets( Array("CL value", "CL Units", "CLC Value")).Select
Windows("Euromcontact Value File TEMPLATE.xls").Activate
Sheets(Array("CLvalueDIS", "CLUnitsDIS", "CLCvalueDIS")).Select
Sheets(Array("CLvalueDIS", "CLUnitsDIS", "CLCvalueDIS")).Select
Application.CutCopyMode = False
Refer A Macro Back To A Cell Value
macro which can paste the value from A1, to another B1 and when A1 is edited again, pasted it in B2. This will probably go on and on until B30. I have tried the if else then in Macro, and even the if elseif, but both don't go futher than B2. E.G A1=1 B1=1 A1=4 B2=4 A1=3 then nothing happens to B3. If there is a way to make this work, it will be great. The way i am tryin to get it is to have =if(B1="","",1) for each cell from C1:30 and with C31 the formula "=count(C1:C30)+1". Then i formated C31 to a custom and make it so that before numbers, there is an B. This means that if B1,2,3 and 4 and numbers in them, then C31 will read B5. That will be the cell i want my next record to go. I would prefer it if there is just a code that i can enter that will go to the next cell when it knows the current cell has a digit in it but if i have to, the count way will do,
Each Array Item To Refer To A Range
I am looking to Set an object as a Array, but i keep getting an error, and the book i have does not really go into Set Functions that much, so not sure if it can be done or not?
For d = 1 To 31 ' days in the month
Set Rng(d) = Range(sRng & ":" & eRng)
sRng andn eRng are already set by date, and I have Dim Rng() As Range at the top.
Can a Set function have a Array in it?
Refer To An Array Variable In A Formula
I'm trying to use arrays in a macro!
' ArrayTest Macro
Dim Array1() As Variant, Array2() As Variant
Dim R As Integer, ilR1 As Integer, iLR2 As Integer
ilR1 = Cells(Rows.Count, 1).End(xlUp).Row
iLR2 = Cells(Rows.Count, 7).End(xlUp).Row
ReDim Array1(1 To ilR1)
ReDim Array2(1 To iLR2)
For R = 1 To ilR1
Array1(R) = Cells(R, 1) & Cells(R, 2) & Cells(R, 3)
For R = 1 To iLR2
Array2(R) = Cells(R, 7) & Cells(R, 8) & Cells(R, 9)
For R = 2 To UBound(Array1)
If WorksheetFunction.CountIf(?????, Array1(R)) > 0 Then Cells(R, 4) = "old" Else Cells(R, 4) = "new"
Basically, the macro concatenates the content of three columns from two different tables into two arrays. Array1 contains the current stuff and Array2, the old one. If I CountIf items from Array1 into the content of Array2, I should get what's new (count 0).
Now, ? in the code should refer to the content of Array2. How do I do that?
The errors I get are 424 object required [Array(iLR2)], 1004 method 'Range' of object '_Global' failed [Range(Array2) or Range(Array2(2), Array2(iLR2))], or type mismatched [Array2].
2000: How To Refer To Worksheet In The Same Book
I have twelve sheets in the book called "Jan", "Feb" to "Dec". Now I will use value in the two sheets by this format:
Row1 will contain columns, "jan", "feb", and etc.
Row2 should be like "=JAN!b2", "=FEB!b2", etc till "=Dec!b2".
Now the question is, how can I use reference, but not directly put in the sheetname such as "Jan!b2"?
In another word, what I want to use is like "=Worksheets(cells(...))!b2".
Table To Refer To Sheet Names
I have 50 sheets (1 sheet per staff member) that will be linked to a Master Sheet that compiles the data. The staff members are based in 5 teams of 10. The names of the sheets are based on the person's initials plus the words Progress Day,
All formulas in the master sheet are based around linking to 10 sheets so I can view the performance of each team. My problem is that the composition of each team changes quite often and so the links have to be manually updated for each team. Is there any way, for example, of compiling a table of team initials like the one below:
that could easily be edited so that the formulae containing the sheet names relate to the table rather than static sheet names?
Eg., If AT left the above team and was replaced by PG then I would update the list above and the current formula
='C:Documents and SettingsAll UsersShared DesktopProgress Day Daisychain[AT Progress Day.xls]Sheet1'!D32+'[EF Progress Day.xls]Sheet1'!D32
would update to:
='C:Documents and SettingsAll UsersShared DesktopProgress Day Daisychain[PG Progress Day.xls]Sheet1'!D32+'[EF Progress Day.xls]Sheet1'!D32
Refer To Sheets Created In Loop
I need to creat a bunch of sheets and do the same work for each of the sheets. My problem is that I do not know how to refer them by the created name. Here is an example of my codes:
Dim I As Integer
For I = 1998 To 2010
Sheets.Add.Name = I
The error is "Subscript out of Range". I believe it is because when I refer a sheets(I), (I) does not recognize as the name of the sheet but the number of that sheet, and there is no sheet numbered 1998 or bigger. However, If I refer the sheet as sheets("I"), it can not find the sheet named "I" either.
How should I refer those sheets name so that I can do some work?
Refer The Cheapest And The Most Expensive Properties That Are In My Table
I have a table, a list of properties I am considering renting. Outside of the table, I have referenced the cheapest and the most expensive properties that are in my table.
This works fine, except when there are two properties that cost the same. Where a lot of the Vlookup questions I have read ask to return the 2nd/3rd value, I want to show them all, eg. if two properties of equal value are the dearest, I'd like to reference both, not just the 1st or 2nd.
Combo List Refer To Any Cell In The Worksheet
I need a list in my form, simple "Name/Number" list (only two options) but i don't want it to refer to any cell in the worksheet.
I want to input a text in a textbox and with the selection in the list above i want to have multiple choices at how to approach the text (if i input a name i want it to be different than if i input a number). All the info i came up on the web refers to lists made upon a range of cells.
How can i make a list without involving ranges of cells?
Dynamically Refer To A Cell In A Macro Formula
I want to write a formula that inserts a column and then does a vlookup in that new column using the cell just to the left of it as the first variable. The problem is, this could be in any random column so I can't do a static reference to $A2 as an example. So, my question is...
Instead of using =vlookup($A2,Sheet1A1:B50,2,false)
How do I replace the $A2 part with some code that says, "the cell to the left of here..."
Named Range. Refer To Current WorkSheet
I put all my named ranges in a seperate worksheet in the workbook.
On a different sheet I have all my data with references to the named ranges. But what it gives me is the cell information from the sheet on which the named range is located and not on the worksheet where I actually need the calculations to be done.
How can I make the named range refer to the cells in the worksheet in which it sits?
I name the function Red apples
RedApples =CONCATENATE($A1&"Red Apples")
How do I make the name reference in worksheet 2 refer to
the cells located in the worksheet in which i use it. In other words, when I use RedApples in Worksheet 3, it gives me what is sitting in A1 in worksheet 2 instead of in A1 on Worksheet 1.
How do I make the name reference in Worksheet 3 keep stepping down along Column A in Worksheet 1?
Formula at issue in actuality is
=IF($S5>0.149,Morethan15,IF(AND($S5<0.15,$S5>0.999 ),Morethan10,IF(AND($S5<0.999,$S5>0.0499),Morethan 5,IF(AND($S5<0.05,$S5>0),Morethan0,IF($S5<0,Lessth an0)))))
the morethan15,10,5,0 and lessthan0 is defined in the last worksheet
Refer To Cells & Only List Duplicates Once
I am making an excel document that has a log of repeating data, one column of which includes names. At the bottom of the document, I am trying to make a small box that tallies all of the people within the document and the number of times they placed an order. What is the formula for when you want excel to find a word within the document? Right now I am using =CELL("CONTENTS",C6) etc. So all that does is repeat the word when it is used. But it duplicates the word in the box down below because it appears in the log numerous times.
Sheet Name Stored In Cell - Refer To In Formula
Sheet names in Col B
B2 : Sheet1
B3 : Sheet2
at C3 where $J$58 is the cell I would like to reference on 50 different sheets
Formula returns #REF!
Col C ref's $J$58
Col D ref's $L$58
Col E ref's $N$58
Col F ref's $P$58
So as I copy the 4 formulas down, the ref to the correct sheet should update but the cell ref's should remain
Refer To Variable Cell Row Number
is it possible to refer to a cell by a variable cell number? For example suppose i want to refer to a cell on column B, by a value which is in cell C1, so the if C1 has the value 7, i would refer to cell B7, abd if it has the value 87 i would refer to cell B87.
Refer To Named Range In Private Module
I've got a problem referring to a named range in another worksheet.
Private Sub test()
Dim var_StartWeek As String ' 0740 This is the value I make a lookup for
Dim var StartWeekNr As Integer ' 40 and get this as a result
'*** Here is the named range in another worksheet (It doesn't work)
Set rng = ActiveWorkbook.Names("WeekData2").RefersToRange
var_StartWeekNr = WorksheetFunction.HLookup(var_StartWeek, Range("rng.Value"), 4) ' I'm doing something wrong here...
'*** If I have the named range in the same worksheeet it works fine
'var_StartWeekNr = WorksheetFunction.HLookup(var_StartWeek, ActiveSheet.Range("WeekData"), 4)
Delete Range Names That Refer To Sheet
I am looking for a way to delete all the range names in a worksheet, not the whole workbook. I have found several procedures that will delete all the names in an activeworkbook. For some reason it takes too long to run. Does anyone know how to handle a single sheet in VBA?
Sum On Multiple Tabs + Refer To Specific Tab
I have a workschedule in excel.
It has a tab for every week in a year so 52 in total. The first tab is supposed to give some general information. I have a few questions on how to implement things.
1 i wanna be able to view the Total amount hours worked in my current week.
I calculate the current workweek using:
Refer To A Named Range In A CSE Array Formula?
I know I've asked before but I can neither find my previous question or the answer.
So, once again.... is it possible to refer to a named range in a CSE array formula?
I know how I would type a formula that way -- but I would be happy to see an example.
Most importantly, will it always work? Or are there pitfalls and dangers?
Use Cell Data To Refer Worksheet In Closed Workbook
At the moment, I have a project where everyone is putting work data on seperate workbooks. Each months work is placed onto another worksheet within that workbook.
The supervisor has his own workbook, that grabs data from each of the workers books. Getting the data is easy enough, however because the supervisor has barely any knowledge of computers, I would like to make it as easy to set up for future months.
Right now, data is collected in each cell using the following formula:-
Is there a way of getting that phrase to substitute the part that says "December 2009" with whatever is put into column A on the same row?
Sheet Indirection. Refer To Sheets With Changing Names
I've been referencing sheets in my code directly with things like
however in recreating a new workbook (to reduce bloat), the sheet-numbering has changed... to avoid having to mess around adjusting things again, I was wondering if it's possible to do some sort of indirection... something similar to
#define SHEET_SC_CONFIG Sheet1
#define SHEET_CUSTOMER Sheet2
'and then use these throughout the code....
(cannot reference by sheet name, as end user may change these)
Find Same Values In Different And Unequal Cell Ranges And Refer To Values
I have data similar as shown in the following:
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
Got A "Mid": Copy A Value To A Refer Contained Within Another Cell
I am trying to copy a value to a ref contained within another cell.
BF3 is where the formula is to copy
BJ1 contains the cell ref of "H6"
BI10 is the next cell to select
I think the problem is activecell = Mid(BJ1,1,5) which is the cell to which i want to paste the value. BJ1 contains the ref in text format of "H6" I am therefore trying to copy the value in BF3 to H6
How To Convert Date To Qtr , With Refer To Today Qtr As 1
I have a date filed at col " E " , and on Col " AT " i wish to convert date to Qtr number. For example .
Now is Feb 2008, from jan till mar 2008 = Qtr = 1
and OCt - Dev 2007 = Qtr = 2.
So the current Qtr = 1 and last Qtr = 2 and carry on for the rest.
DOD_1 EAT1inv_dateCurr_Qtr212/22/2000 35/24/1999 45/22/1999 55/22/1999 65/22/1999 75/22/1999 85/22/1999 95/22/1999 Excel tables to the web >> Excel Jeanie HTML 4