Refer To The Last Row In A Selected Area Using VBA..?
Nov 3, 2008
I'm trying to do is add a signature box (for inventory-taking accountability) directly below the pasted area after I paste it. Now, of course, the copied and pasted area could have 5 rows or it could have 15, and when I copy it from the first sheet and paste it into the second it doesn't preserve the name of the range on the second page, so what I really need to do to add the signature box directly below the last row in the pasted area is specify the location in relation to the last row in the pasted selection, but I don't know how to do that. Using ActiveCell always refers to the top-left-most cell in the selected area. So...
If I have an area selected, how do I refer to the bottom-right-most cell in that selection (in the same way that ActiveCell refers to the top-left-most cell)? Or at least the bottom row? Or, even better, the row below the bottom row?
View 2 Replies
ADVERTISEMENT
Apr 11, 2013
How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies
View Related
Apr 17, 2007
I need to worked out Hours worked in a timesheet. This was the easy part, the hard part is the clause tha HR threw in, which is:
If you have worked and 8 hour day WITH 1 hr lunch then you qualify for overtime.
if you work a 8 hr day and work through your lunch (1 hour) (so equivelant to 9 hrs) you still do NOT qualify for overtime there for Overtime = 0.
This is cause some people work though their lunch to get overtime, but legally they have to have a break so we are not paying overtime for it. I have basically tried in a formula to replicate this but it works with some data and not with all. attached is an example, as you'll see the formula works in some cells, but not others.
View 2 Replies
View Related
Jan 10, 2007
I don't think this is possible, but I thought I would ask.
I have buttons on a sheet.
Then I have drawings, that I make, using different shapes.
Instead of selecting all shapes on the sheet, I want to just select the shapes in a range say B17:F28 so I can group them.
View 9 Replies
View Related
Jul 12, 2006
I have some code which selected a certain amount of columns depending on
whether they contain values or not. Once I have this range set and I select
it I want to set this as the print area. I am not quite sure how to do
this. for example I tried:
rngUnion.Select
ActiveSheet.PageSetup.PrintArea = ActiveCell. CurrentRegion.Address
View 9 Replies
View Related
Jan 22, 2009
I need to display a selected area in an excel sheet in a VB form! I am not sure how to convert the selected area to an image ! The area already contains some images! I am attaching the file for ur refrence!
I need the portion which is within the frame to be converted as an image and get displayed in a Vb form!
View 3 Replies
View Related
Oct 2, 2009
I'm trying to set a variable for a range based on the cells selected. For example, I want variable "myrange" to be set to range("A1:D14") if I click on cell A1 and drag it to D14. So far everything I've tried ends up getting the good old "1004 - Application defined or object defined error".
View 4 Replies
View Related
Dec 15, 2013
How to turn off or default the warning box message ...
"Data on the Clipboard is not the same size and shape as the selected area. Do you want to paste the data anyway"
I hate having to click yes on this every time I paste something. I do it hundreds of times a day.
My tables is centered and merged because my external date changes sizes each time I paste to the table.
I have looked all over to try and find an "OFF" warning/message button for this. I just want to know how to turn it off or default it to never pop up again!
View 4 Replies
View Related
Feb 20, 2014
So far I have this just for testing but I do not know what I would do to have the user select a region and for me to test if it is a valid size for a matrix. (2x2 or 3x3 are the valid sizes).
Code:
Public Function MyInverse() As Variant
Sub Size()
Dim row As Double
Dim col As Double
[Code] ...........
Else:
MsgBox "You have entered an invalid size of the matrix. Please enter a 2x2 or 3x3 matrix."
End If
End Sub
View 2 Replies
View Related
Feb 20, 2013
I want to put vertical values to a selected space with horizontal orientation
See the excel file : FILL IN SELECTED DATA.xlsx
View 9 Replies
View Related
Mar 26, 2014
I have the following code that allow me to select all of the cells with the color same as the active cell within a selected range:
Sub SelectCellColor()
Dim CellColorFormat As Long
Dim RangeString
[Code]....
I'd like to ask how can I fix the error so that there will not be a limit of the number of colored cells in a selected area?
View 2 Replies
View Related
Feb 25, 2009
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies
View Related
Nov 1, 2006
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
View 3 Replies
View Related
Feb 12, 2013
I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
View 1 Replies
View Related
Jul 25, 2014
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
View 1 Replies
View Related
Jun 18, 2009
In Excel, I want VBA to refer to the SENT ITEMS folder in Outlook. I want to loop over all sent items, and if the email address satisfies a condition, then record that fact in Excel. I am good at VBA in Excel, and I have a passing knowledge of VBA in Outlook, but I don't know how to refer to Outlook within my Excel VBA.
View 2 Replies
View Related
Sep 14, 2009
How do I refer to a combo box (form control) in a calculation. EG: how can i say if comboBox = Something then ....
View 5 Replies
View Related
Nov 9, 2009
I'm using this code to open another workbook:
Dim FileToOpen
FileToOpen = Application.GetOpenFilename _
(Title:="Please locate BlankSAMSRegister.xlsm", _
FileFilter:="BlankSAMSRegister.xlsm (*.xlsm),")
If FileToOpen = False Then
MsgBox "No file specified.", vbExclamation, "Error"
Exit Sub
End If
Once this second workbook is open, how do I refer to each one within the subsequent code?
I really need the parent workbook to be named as wb1 and the child to be names wb2 so I can flick between the two in the next macro... I can get the parent using thisworkbook.name, but how do I get the child?
View 9 Replies
View Related
May 10, 2007
I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window
View 4 Replies
View Related
May 9, 2014
I have multiple sheets as Name1 ; Name2 ; Name3 and each sheet have a value on cell A1 for any number let say between 0 to 100. On another sheet call SheetName, I have A1=Name1 ; A2=Name2 ; A3=Name3.
I have formula as:
[Code] .....
The INDIRECT formula work to refer each cell A1 in each sheet, however if the sheet name include a space then it won't work anymore. How to make it work with the sheet name with space?
View 5 Replies
View Related
Mar 9, 2009
The summary page summarises the source data into how much revenue each department has made over 12 months.
However the formula in Summary worksheet column B will only total up the amounts if the month in the Source worksheet column B is the 1st of the month. How do I change the formula in Summary worksheet column B to purely go by month and ignore the day?
View 4 Replies
View Related
Jul 17, 2009
The "summary" tab will be calculating 20 statistics for each of the 30 or more tabs. In an effort to automate this - can I replace writing "January!" with a cell reference? For example;
instead of writing = sum(january!a:a). Could I write = sum("A1"a:a), with the A1 Cell = january!. Obviously I tried this and it does not work but I am not sure if there are other options.
View 2 Replies
View Related
Jul 20, 2009
Let's say I have a formula in cell A1 that is =COLUMN(L5). So cell A1 returns the result 12 (for column L).
I now want to create an index formula in another cell:
=INDEX(C1:C12, ........), but I want the 12 in C12 to be picked up from the result of cell A1
So, I tried various things like =INDEX(C1:C&INDIRECT(A1)....etc but I can't work out the correct way of doing this.
View 6 Replies
View Related
Nov 24, 2009
I've got a workbook that increments in sheets for each new week. I have a cell showing the current week number for that sheet ( lets say cell C1) and any formulas that need to reference data from the previous sheet do in 'indirect' function which basically looks at the current week number ( lets say week 20)in cell C1 and minus's 1 to navigate to the previous week (week 19).
I was wondering if there was a way to reference the previous sheet purely by the order they're in.
So say i have 5 sheets named "1,4,5,8,9" and these represent week numbers so the sheet named '8' in cell C1 would have '8' standanding for the week number but cells that wanted to reference the previous sheet couldn't do the 'indirect' C1-1 as there is no 'week 7'.
The weeks used could vary alot so a formula to reference the directly previous sheet is needed.
ok, thought best if i show you the actual formula
=IF(ISBLANK(C12),"",IF(ISERROR(VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE)),G12,SUM(G12,VLOOKUP(C12,INDIRECT("'"&($AG$2-1)&"'!$C:$AG"),28,FALSE))))
the '$A$G2-1' part is the bit that redirects to the previous sheet based on it's name, what i think i really need is to replace this part with a 'PrevSheet' function but i'm unsure how.
View 11 Replies
View Related
Apr 3, 2014
Is it possible to refer to an object which is in another subroutine?
Or should i have to give its definition in each sub i need it?
View 7 Replies
View Related
Nov 20, 2009
=COUNTIF(A2&"_RES","Yes")
A2 refers to a linked cell but I have tried without the link there still no joy. Together they would generate for example "DCA_RES" which would refer to a column range in a different sheet on the same workbook.
I want this to work so that I can implement more easily new lines to refer to different sheets. (Drag to copy) instead of having to copy and edit a formula 100 times.
View 6 Replies
View Related
Oct 26, 2009
I'm trying to call a function that is stored in a cell as a text string. In cell A1, I have the text Sum('Sheet1:Sheet3'!C3). I want to call this function from a different cell. Is this possible using the pre-defined functions, or would I be better creating my own function?
View 4 Replies
View Related
Aug 31, 2012
I have a selection that I am going through with a 'for each' and then performing actions if the cells meet a certain criteria. I have been referencing nearby cells with the offset function, but now my sheet is too big and I need to change the code often and the offset function is difficult, is there anyway to refer to cells without the offset function, preferably by column letter
PHP Code:
For Each Cel in SelectionIf Cel = x Thenvalue1 = Cel.Offset(0,39).Valuevalue2 = Cel.Offset(0,5).ValueEnd IfNext Cel
View 9 Replies
View Related
Nov 7, 2013
with the below code i want the highlighted in red (RC11) to refer to last column and last row.
Code:
Sub try ()
Dim finalrow As Long
Dim finalcol As Long
Set wspo = Worksheets("Previous Order")
wspo.Select
finalrow = wspo.Cells(Rows.Count, 1).End(xlUp).Row
finalcol = wspo.Cells(1, Columns.Count).End(xlToLeft).Column
[code]...
View 2 Replies
View Related
Jun 9, 2006
When I look in VBA under the Microsoft Excel Objects at the sheet names in my workbook I see two names for the same sheet like so:
sOrdersFB(Orders From Bob)
how to select using the first name sOrdersFB?
View 9 Replies
View Related
