Reference To Copied Or Cut Range
Dec 28, 2007when I cut or copy a range - and then select a different area - how do I reference to the original cut or copied selection, i.e. the "marching ants" range?
View 3 Replieswhen I cut or copy a range - and then select a different area - how do I reference to the original cut or copied selection, i.e. the "marching ants" range?
View 3 RepliesI've been trying to copy and drag formulas on my spreadsheet by the references are not working. Example. I have =$B1 in cell A1. If I copy and drag that to A2 it remains =$B1. And it should change to =$B2, correct? Same as if if make the column absolute.
View 9 Replies View RelatedHow do I copy a sheet into a new workbook without the formulas referring to the old workbook? For example, formulas end up like this: = SUMIF('[BAS05-07to09.xls]IN'!$B$6:$B$62,101,'[BAS05-07to09.xls]IN'!$E$6:$E$62). I want them to come across as I originally had them, like this: =SUMIF(IN!$B$6:$B$62,101,IN!$E$6:$E$62). here are too many to do it manually each time.
View 6 Replies View RelatedMy worksheet "Ledger" has a column of 1-31 days, with row headings of MC/Visa, Amex, Disc & Cash. I also have sheets "1-31" within the same workbook that contain the data I need under each heading. I can get the data for "Amex" in sheet "1" to appear in the first cell underneath "Amex" in the sheet "ledger" by typing the formula ='1'!$B$29.....
View 6 Replies View RelatedI'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies View Relatedwith a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies View RelatedI have formula that copies a range of cells and pastes to another worksheet (based on the click of a button on that row), however i need to adapt it to define which sheet to paste it to based on the contents of another cell on the same row. The below code all works for the first part of this, i added in Sub MN and Sub Month_to_Classify to resolve the second part. When i run this at the moment i get
Run-time error '1004': Method 'Range' of object'_Global' failed
and the highlighted line of code is in Sub MN:
Range(ActiveCell.Offset(0, -8)).Name = "Man"
Sub AreYouSure()
[Code] ........
I'm working with some diagnostic messages produced by a communications network, and trying to isolate a certain kind of message. There are many different types of messages contained in the error logs, and I need to look at different ones at different times. As a single log may contain thousands of messages, I'm trying to use VBA to grab the ones I want. The easy part is that these logs can be exported as CSV files.
Each message contains an identifier which I can use for finding the correct messages of a given type. (I'm only looking for one type at a time.) However, this identifier is not on the first line of the message; it's buried a few lines down, and the number of lines is variable. Additionally, the length of the message is variable. The good news is, all messages of interest start with the same text string, and all of them end with another consistent text string. It looks something like this:
Message Start
blah
blah
Message Type
blah
blah
Message End
(Where "blah" is useful information that varies, and the number of lines of blah varies.)
The Message Start string is constant across all message types, as is the Message End string, so I can't use them to find the correct Message Type. However, they are still useful for marking the start and end of each message.
I'm using the find function to find the correct message type, then another find (going up) to get the start of the message, and putting the row number into a variable (msgStartRow). Then I find again for the end of message (msgEndRow).
That all works just fine.
What I can't figure out is how to turn those message row numbers into a range that can then be copied and pasted onto a separate worksheet.
How can I use these variables to copy the correct range? For example, this is what I recorded manually, but it's not intelligent. It can't accommodate different message lengths:
Code:
ActiveCell.Offset(6, 0).Range("A1:A145").Select
Selection.Copy
get the address of the last range copied to the clipboard? I tinkered with GetFromClipboard but I would like to find a solution that is not dependent upon DataObjects if possible. Since copied cells are "marqueed" in Excel, is there a property relating to marqueed cells address?
View 8 Replies View Relatedhow I can have a routine execute whenever a cell range is copied in excel. Doesn't matter whether by selecting the appropriate menu item or when CTRL+C is pressed (I mean it must work anyway).
I need this cause I would like to store in a public variable the address of the range which is being copied in order to use it later for undoing purposes.
I first tried to find a way of accessing what has been copied into the clipboard but it doesn't seem possible without using external DLLs.
I have applied conditional formatting to a range =$F$1:$J$44 based on the contents of a single cell =$L$44="No"
Now, I want to copy the whole range, including L44 to create another range controlled by L88, for example, but the $ signs are preventing that with the new range still being controlled by L44.
Is there a way to easily copy this whole range, including the CF, as I need to copy it many times down the page and I don't want to have to edit the "L44" cell each time.
In my current sheet, I have a button which pastes the contents of the user's clipboard into cell A20. The data that is being pasted is a simple, single-column range of data that may or my not contain blank cells. When this button is clicked, the user's clipboard should already have data.
Some of these pasted ranges may go from A20:A40, A20:A60, or even A20:A73. The point is, the length of the pasted information is variable.
I am looking for VBA code which can look at the recently pasted range in A20:AX, find blank cells, and remove them. Here is my current code (very simple), which is only the paste function:
VB:
Sub admin_btnPASTE()
' paste_align Macro
' pastes data
On Error Goto Whoa
[Code]....
I'm currently trying to insert the copy range of one worksheet to another. Let's say I have 3 worksheets, one main and two additional info sheet. I want to search column C in main worksheet for blank cell and use column F in the same row as the worksheet name which I want to copy from, then use column E from main worksheet as the keyword for the range I want to copy(range from column E to column Z). But when inserting, I want the keyword in main worksheet such as 'G' in the same row as blank cell to match the 'G' in copied worksheet. Because the 'G' in main worksheet is not in the same column for each row, I try to search the forum but can't find the inserting part. I also attach the example workbook.
View 3 Replies View RelatedBelow is code I have attempted. I am learning VBA and have gathered this code from the internet and this forum. I have data that is in columns B to E and from row 7 down. I want this VBA code to run when data is copied/pasted in these cells. Where the last values stop will vary so I just want to be sure this code is executed after all the data is pasted in these cells. The data will be pasted at one time. When the user removes the data from these cells, I do not want the code to run.
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if less than four cells are changed or content deleted
If Target.Cells.Count < 4 Or IsEmpty(Target) Then Exit Sub
[Code].....
Is it possible to reference a cells value to define a range reference?
[Code] ......
I am trying to define the row value in the range reference with a value in a secondary cell?
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
I have a range that I named. Let's say that range is called "RangeX". Let's say RangeX is defined by B2:E10
I have a series of formulas that give me the row and column numbers of the starting and ending cell of a subset range I want to create within RangeX. Let's say the starting cell is defined by (1,1) and the ending cell is defined by (3,4) within RangeX. Translated, the starting cell would be B2 and the ending cell would be E4.
How do I create a subset range using the starting cell (1,1) and (3,4) in VBA? I would like to use the row/column reference as RangeX itself could move around.
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet
A B C D colA colA,B colA,B,C colA,B,C,D
104 20 21 CR10600S 104 10420 1042021 1042021DUS
104 20 21 CR10600SX 104 10420 1042021 1042021DUS
104 20 21 CR10603S 104 10420 1042021 1042021DUS
104 20 21 CR10603SX 104 10420 1042021 1042021DUS
104 20 22 CR49605S 104 10420 1042022 1042022HKZ
104 20 22 CR49605SX 104 10420 1042022 1042022HKZ
104 20 23 CR39601P 104 10420 1042023 1042023SPR
The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it.
A B C D E F G
STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE
CR10600S Added 1042021 104 20 21
CR10600SX Added 1042022 104 20 22
CR10603S Added
CR10603SX Added
CR49605S Added
CR49605SX Added
CR39601P Needed
Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
I am using a multi-tab spreadsheet in which one tab has an outside-generated report dumped in as the input, with other tabs referencing its data. The Input tab has two sets of near-duplicate data, and I need to reference the second set, which begins in different rows for each Input report. I can't do a specific vlookup, because the reference appears twice in the tab but I need the data following the second reference. Can I name a range, beginning at a changing point (the cell which reads "Exposure:Net") and continues to the end of the tab, and have functions referencing it work properly?
View 9 Replies View RelatedI have a sumproduct function that is aimed at a big block of data. Is there a way that I can write the function to where it will always find the last row of the data set and adjust accordingly?
For example if right now the range is A1:G2000 and next month I add 20 rows of data I want the sumproduct ranges to automatically adjust to A1:G2020.
i need to copy a range from one workbook ("weekly data") to another ("Yearly data"). The range to copy is called 'weekly data'. The ranges to paste to are called 'week 1' through to 'week 52' (this is the yearly data sheet). On the yearly sheet there is a cell Po1' that week on week will state the week number ie 'week13', 'week14' etc. code to use this data in 'P1' to tell the macro to copy to the appropriate week. I have attached as far as i got (then failed due to lack of experiance).
presuming that both books are open
HTML windows("weekly data").activate
sheets("weekly transfer").select
range("weekly data").copy
windows("yearly data").activate
'only one sheet in workbook
range ' data from p1 .paste
How Could I change the below line to reference the sheet "NO" not just a range.
Set Source = Range("NO!A1:BK10000").SpecialCells(xlCellTypeVisible)
In a worksheet is a table:
a b c d
e f g h
i j h l
m n o p
q r s t
I'm looking for a procedure to (with the help of
an array) reproduce this table exactly under the original one
with one row between them but in the folowing form:
q m i e a
r n j f b
s o h g c
t p l h d
the procedure should be applicable on any haphazard
regardless of its place on a worksheet
In the attached sheet. Cell C6 represents the concatenation of aspects of a product. I want to know if it is possible to use that cell as the named range (there is a corresponding named range) in a lookup. The lookup gives me the product code.
View 5 Replies View RelatedI'm trying to use the INDEX function to return a value from a named range. But I'm not directly typing the named range into the INDEX argument. Instead, I'm grabbing the named range from a vlookup table (essentially, another named range). So, if "vh" is the name of the named range, I'm not using the formula:
View 14 Replies View RelatedI have a 'receipt' worksheet with about 500+ lines of data, here is an example of what could be in cell A166: 1.1 NET_AMOUNT 742,523,253.83
In another worksheet, is there a way to look at the whole worksheet for column A in receipt to say:
if 1.1 is true, capture text to the right of 'NET_AMOUNT' then format using =Dollar?
I want to apply conditional formatting to a range, but only to the number of rows in the sheet (to avoid formatting blank rows). I am not sure how to insert the row count into the range select.
NumRows = Application.WorksheetFunction.CountA(Range("A1:A65536")) gives me the number of rows, but how do I get that into
Range("A5:F18").Select
18 being the number I want to substitute the row count for.
I'm trying to lookup two dates in a column in order to provide the start and end point of an array for use in the PERCENTILE.INC function.
I can't quite get it working, my base idea is something like;
PERCENTILE.INC(INDEX(A1:A10,MATCH(C1,B1:B10,0))&":"&INDEX(A1:A10,MATCH(D1,B1:B10,0)),0.95)
So this looks for the dates found in C1 and D1, finds them in B1:B10, and returns the corresponding cells in A1:A10 for the array part of the PERCENTILE syntax.
I think the issue is that the lookup will return the value in A1:A10 rather than using the cell reference for the PERCENTILE.INC function...
Im currently located in Sheet1. I want to reference a cell in Sheet2.Range("B2") using a R1C1 reference.
View 9 Replies View Related