Reference Cell Looks At One Range Then See If Any Exist In Another Range
Oct 21, 2009
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet
A B C D colA colA,B colA,B,C colA,B,C,D
104 20 21 CR10600S 104 10420 1042021 1042021DUS
104 20 21 CR10600SX 104 10420 1042021 1042021DUS
104 20 21 CR10603S 104 10420 1042021 1042021DUS
104 20 21 CR10603SX 104 10420 1042021 1042021DUS
104 20 22 CR49605S 104 10420 1042022 1042022HKZ
104 20 22 CR49605SX 104 10420 1042022 1042022HKZ
104 20 23 CR39601P 104 10420 1042023 1042023SPR
The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it.
A B C D E F G
STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE
CR10600S Added 1042021 104 20 21
CR10600SX Added 1042022 104 20 22
CR10603S Added
CR10603SX Added
CR49605S Added
CR49605SX Added
CR39601P Needed
Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
View 9 Replies
ADVERTISEMENT
Nov 28, 2008
I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
View 8 Replies
View Related
May 8, 2008
I need to compare a text box value to a dynamic range the value will be entered in upon a command button click. If the value matches a value within the range, then message box "Duplicate Item Found." Also, if the value is blank, then message box "Please Enter A Value." And finally if the value proves to be unique and not blank, then add the value to the range.
I want to do this on a command button click so that I can use the textbox with 2 other buttons: one to refresh the textbox to a blank value, and one to exit the form the textbox is located in.
View 4 Replies
View Related
Sep 27, 2011
Here is a sample data, i am searching for text "home" against every airline among all countries and want to allocate home country to each airline (which is top row). Is there any formula which can do this?
AE - United_arab_emiratesAF - AfganistanAL - AlbaniaAM - ArmeniaAA - AMERICAN AIRLINES
AwayAwayAwayAwayAAZ - AMERICAN AIRLINES C/S AA NON OAwayAwayAwayAway
AB - AIR BERLIN GMBHAwayAwayAwayAwayABZ - AIR BERLIN PLC C/S NON AIR BERAwayAwayAwayAway
[Code] ..........
View 2 Replies
View Related
Jan 31, 2008
The code below loops thru a specified range I12:I26 for a duplicate combobox value in each cell. When I enter the same combobox value in range I43:I54 it still finds a duplicate.
Select Case cmbSel_WBS.Value ...
View 4 Replies
View Related
Dec 16, 2007
Trying to enter dates across first column with userform. Must not enter same date twice. Need to searching row to skip entering the date from userform textbox if date is already there. Dates are in order but not sequential. I want to search for existing date before the following
Set LastCol = Sheet2. Range("jk1").End(xlToLeft) 'enter data on sheet2
LastCol.Offset(0, 1).Value = TextBox2.Value 'date
Rows("1:1").Select
ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Add Key:=Range("b1"), _
SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
With ActiveWorkbook.Worksheets("Sheet2").sort
.SetRange Range("b1:jk10000")
. Header = xlNo
.MatchCase = False
.Orientation = xlLeftToRight
.SortMethod = xlPinYin
.Apply
End With
View 2 Replies
View Related
Jan 16, 2009
i need to copy a range from one workbook ("weekly data") to another ("Yearly data"). The range to copy is called 'weekly data'. The ranges to paste to are called 'week 1' through to 'week 52' (this is the yearly data sheet). On the yearly sheet there is a cell Po1' that week on week will state the week number ie 'week13', 'week14' etc. code to use this data in 'P1' to tell the macro to copy to the appropriate week. I have attached as far as i got (then failed due to lack of experiance).
presuming that both books are open
HTML windows("weekly data").activate
sheets("weekly transfer").select
range("weekly data").copy
windows("yearly data").activate
'only one sheet in workbook
range ' data from p1 .paste
View 3 Replies
View Related
Oct 28, 2009
In the attached sheet. Cell C6 represents the concatenation of aspects of a product. I want to know if it is possible to use that cell as the named range (there is a corresponding named range) in a lookup. The lookup gives me the product code.
View 5 Replies
View Related
Mar 5, 2008
Im currently located in Sheet1. I want to reference a cell in Sheet2.Range("B2") using a R1C1 reference.
View 9 Replies
View Related
Jan 12, 2009
I have a variable which contains the column number. How do I then reference a range in VBA using that column number, as opposed to the letter? I know how to convert the number into the letter, but I also know there has to be something more simpler. For instance, a form of the ADDRESS function, but in VBA?
View 9 Replies
View Related
Aug 1, 2008
I have a list of numbers in Column A and in Column B I have a standard Sum formula which sums the adjacent number in Column A and the four numbers before it.
A B
1 =Sum(A1:A5)
3 =Sum(A2:A6)
5 ...
3 ...
5
6
I would like to have a formula which references another cell to define how many rows to sum from the starting cell. So in the above example, the total number of rows which are added together is 5. If I wanted to change all of the SUM formulas to add 6 rows, I would like to be able to change the number in the reference cell to 6 and all of the sum formulas would switch to adding 6 rows.
View 3 Replies
View Related
Jul 21, 2013
I have a range that I named. Let's say that range is called "RangeX". Let's say RangeX is defined by B2:E10
I have a series of formulas that give me the row and column numbers of the starting and ending cell of a subset range I want to create within RangeX. Let's say the starting cell is defined by (1,1) and the ending cell is defined by (3,4) within RangeX. Translated, the starting cell would be B2 and the ending cell would be E4.
How do I create a subset range using the starting cell (1,1) and (3,4) in VBA? I would like to use the row/column reference as RangeX itself could move around.
View 1 Replies
View Related
Dec 22, 2008
I have a loop that executes roughly 7.7 million times when my VBA program runs. Neednless to say it take a long time to run - usually a couple days.
The inner-most loop contains a line of code from way back in my early vba programming days when I knew even less than the small amount I know about programming now (and if you can follow that sentence you might be able to understand some of the spaghetti code I write :-) ).
for k = 1 to n
if Worksheets("Personell").Range("D" & Trim(Str(k))) > dtCompleted then ...
Would it be faster to use this syntax (which I just found out about):
if Worksheets("Personell").Cells(k,4) > dtCompleted then ...
It would cut out 2 functions calls, trim() and str(), so it would be faster, right?
I am almost embarassed to post the Range("D" & Trim(Str(k)) line of code because it looks so convoluted now, but that's how I learned to program, just fumbling through until it ran...
So in short, I just wanted to confirm that the cells() syntax run faster before I spend an hour editing and tested.
View 9 Replies
View Related
Dec 9, 2009
I am writing a function that opens up an external excel document, identifies a string in a certain range and then i also want it to return a cell reference for that string including the number of rows beneath the cell that the string was found in.
View 6 Replies
View Related
Apr 8, 2008
I have a formula which is using named ranges-
=SUMPRODUCT(xxx-30,Ship_30)/SUM(Ship_30)
where Ship_30 name references the following-
='sheet 1'!$C$20:$C$38
The value of 20 is static, the value of 38 is dynamic. Each new time period adds another value (i.e. 39,40,41)
Having to edit each name range reference in the name manager is not acceptable since there is potentially over 30 to edit each month.
I would like to edit a cell which would have contained the value 38 (or C38) with a new value of 39 (or C39) so the range reference would be updated with the new value.
The goal would be to have a couple of rows with the following that could be edited with new values
View 9 Replies
View Related
Sep 18, 2012
I'm working with a very complex financial workbook with over 3,000 named ranges and would like code to replace the named ranges with the cell references and display it in a message box so the user can easily trace the references without removing the named ranges from the formula. There is a lot of code with the named ranges, so actually converting them to cell references is out of the question.
I found this code, but obviously it physically replaces the range names in the cell. Hopefully it can be converted to display it in a text box.
Code:
Sub FixReferencesToCellNames()
Dim c As Range, n As Name
For Each c In Range("A1:IV65536").SpecialCells(xlCellTypeFormulas)
[Code]....
What I am looking for is that a user select a cell that they want to see the references, run the code to see the cell references for that particular cell in a message box.
View 5 Replies
View Related
Nov 14, 2006
In the attached spreadsheet I am trying to always reference the sum column from Qty in Det Est.
This is because the number of roads changes for each project.
I created a dynamic range name surfacing with the following formula:
=offset(qty!$a$1,0,0,counta(qty!$A$A), counta(qty!$1$1)).
My question is what formula do I use to reference the sum column for each row on the Det Est Sheet.
View 4 Replies
View Related
Feb 28, 2008
Is there a way to start match from a relative position?
Say a match I have in column "A" returns 344. Is it possible to start a new match for column "B" from that spot, instead of having it return a match starting at the top?
View 5 Replies
View Related
Jun 9, 2014
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
View 9 Replies
View Related
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Nov 7, 2012
If I have two cells and a named range mexico
A1, A2.
A1 contains the string: "mexico"
A2 is the cells that has required data validation (drop down list).
I want A2's validation reference to be dynamic, in the sense that I can it reference it to A1; converting the string "mexico" to a named range mexico
I tried inputting = INDIRECT(A1) into A2
But I lack clarity in my understanding of referencing.
What is the correct procedure here.
View 2 Replies
View Related
Jul 3, 2009
I am preparing a model for a client that runs excel 2003. I need to change the format of a range based on the value in a cell (reference cell) that is outside the range to be reformatted.
Reference cell is a named cell with the value calculated with a Match() function, the only possible values are (1, 2, 3).
I need the VBA code to retrieve the reference cell value and apply one of three formats to the range. I believe the code for that part is something like:
Private Sub Format_Font()
Set vrange = Range("d63:r63")
Set refrange = Names("ind_agentfee").RefersTo
Set refrange = Mid(refrange, 2)
On Error Resume Next
If refrange = 1 Then
With vrange.Font
.Style = "Comma"
.NumberFormat = "_(* #,##0.0_);_(* (#,##0.0);_(* ""-""??_);_(@_)"
Else
If refrange = 2 Then
With vrange.Font
.Style = "Comma"
.NumberFormat = "_(* #,##0_);_(* (#,##0);_(* ""-""??_);_(@_)"
Else
.Style = "Percent"
End If
End Sub
I am having problems getting the proper opening statements and declarations correct and also get an "Else without Then" error with all combination's that I am attempting. I am sure that the code is mess now as I started with a recorded macro then modified it multiple times while researching the web.
View 9 Replies
View Related
Mar 10, 2013
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
View 4 Replies
View Related
Jun 21, 2014
I am building an interactive sheet to profile a number of divisions based on a summary sheet of about 1200 rows and 90 columns of profiling criteria
I have attached an example but essentially:
1. I would like to be able to select from a list a value which would also be a named range title
2. Have the range information transposed into a row
What works:
1. I can transpose the range information when I use the following formula
I used OFFSET(Governance,COLUMN()-MIN(COLUMN(HGovernance)),0)
The problem:
I cant get it to use a cell reference (i.e. When I select Governance out of a Drop down list of Finance, HR, Governance etc). Having to type in "Governance" to bring back governance range information is fine, but not great when I am trying to profile the Finance or HR division as it then becomes too manual.
View 11 Replies
View Related
Oct 24, 2013
This is Excel 2010 on Windows 7
Trying to figure out a VB Script but don't know where to start.
I have a sheet for each month. lets take September 2013
A Column with 200 Servers (A1:A200) on the Intranet listed as server-1/, Server-2/ Server-3 ... Server-200/
Each Server lists a location of a file for each day (31 columns per row)
I am trying to check for the existence of the files on each server (The Cells contain the URL and File Name in Range B2:AF201) starting with server-1 check the URL in B2 if it exists, go to C2, Continue with that row until the file check is False (The Page will show a 404 error) if not found delete cell url and continue. do this for all 200 rows
View 3 Replies
View Related
Aug 20, 2014
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies
View Related
Jul 14, 2014
Is it possible to reference a cells value to define a range reference?
[Code] ......
I am trying to define the row value in the range reference with a value in a secondary cell?
View 3 Replies
View Related
Aug 6, 2006
I have a formula:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(Sheet1!N:N,ROW(Sheet1!N2:N65536) -ROW(Sheet1!N1),0,1)),--(Sheet1!N2:N65536="Dog"))
Calculating the sheet takes forever because of the cell range. Sometime the sheet will have 10 rows other times it will have 10,000 rows, so I put the range N2:N65536. I already have a count of the number of rows in a cell. Can I refer to that cell in the range, for example: N2:N&B1 (where B1 has the number of rows)?
I tried it a ton of ways but can't get it to work.
View 9 Replies
View Related
Jan 24, 2008
I need to build a formular in a cell that uses various columns in it's row such as: =A2+A4+A17+A24. In the past I've used simple number references to the columns (a is 1, b is 2,.....) I can't do tht though if I'm using a macro to automate the creation of a formula, right?
Is there a property I'm missing that will return the letter reference to the column instead of just the number as Activecell.column does?
My alternative is to write my own code to do this, but you know the bit about not reinventing the wheel....
View 9 Replies
View Related
Dec 21, 2009
I am using a multi-tab spreadsheet in which one tab has an outside-generated report dumped in as the input, with other tabs referencing its data. The Input tab has two sets of near-duplicate data, and I need to reference the second set, which begins in different rows for each Input report. I can't do a specific vlookup, because the reference appears twice in the tab but I need the data following the second reference. Can I name a range, beginning at a changing point (the cell which reads "Exposure:Net") and continues to the end of the tab, and have functions referencing it work properly?
View 9 Replies
View Related
