Referencing A Textbox Within A Multipage Userform
Jan 25, 2010
The code below works when the textbox (txtExt) is not within a multipage but doesn't when it is. I'm presuming i need to reference the multipage and page number but can't seem to get the right syntax.
Private Sub txtExt_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Details.Activate
Dim agExt As String
Dim extFind As Range
agExt = txtExt.Value
Data.Range("M3:M120").ClearContents
With Details
Set extFind = Range("B1")
For lCount = 1 To WorksheetFunction.CountIf(Columns(2), agExt)
Set extFind = Details.Columns(2).Find(What:=agExt, After:=extFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
With extFind...................
View 9 Replies
ADVERTISEMENT
Jun 3, 2014
I am working on Excel 2010 and am still new at this
Attached is a UserForm with a Multipage
I have added TextBoxes to Page 1 to Page 3
Here is my problem
The Macro to show the form is not working.Also I need to populate TextBox1 with information on the "Data" sheet.
TextBox1 must show information in C3
TextBox2 must show information in C4, and
TextBox3 must show information in C2
I have tried some VB on the TextBox but it does not update, not sure if i need a command button.
View 4 Replies
View Related
Jul 16, 2008
I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
View 9 Replies
View Related
Jan 23, 2014
I have the following code in a module that works fine for referencing a textbox on a page of a multipage on a userform, but I'm stumped trying to figure out how to reference the page object itself vs the multipage then referencing the page later. My code is:
Code:
Dim a As MultiPage
Set a = UserForm1.MultiPage1
a.Page2.P2_ScoreTotal.Value = (Val(a.Page2.P2_Q1_Score.Text) +
[Code]....
View 8 Replies
View Related
May 17, 2006
I have a MultiPage control that has 67 TextBoxes on it, changes to 14 of these TextBoxes will trigger a public subroutine called TB1Refresh. I have a TextBox and a ComboBox just above the MultiPage control. The ComboBox is set as a MultiColumn. The ComboBox is working. The TextBox is called TB1. The first TextBox on the MultiPage is called TB2. There are no duplicate names on this UserForm. When I scroll though the list in CB1, the values in the TextBoxes on the MultiPage scroll as the they are supposed to. The problem is that every time one of the 14 TextBoxes changes, the subroutine is supposed to fire. Here is the code I use in two of the TextBoxes to fire this sub:
Private Sub TB8_Change()
TB1Refresh
End Sub
Private Sub TB9_Change()
TB1Refresh
End Sub
I put a MsgBox at the beginning and the end of TB1Refresh to see what was happening. They never fired! So the question is, why won't the subroutine fire when called upon to do so. This code was working before I added the MultiPage to this UserForm,
View 2 Replies
View Related
Jun 12, 2007
i have this userform which has 20 textboxes. these boxes are used for numbers only. however, i want my numbers, as i type them, to appear in the boxes with thousands separators. even if i don't type the commas, the numbers will be formatted as if i typed them with such. Do i have to format the textboxes one by one for the formatting that I want or there are codes that could be used for all these textboxes?
View 9 Replies
View Related
Apr 24, 2007
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
View 9 Replies
View Related
Feb 1, 2007
I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
View 4 Replies
View Related
Jul 2, 2014
Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.
View 4 Replies
View Related
Feb 23, 2010
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
View 5 Replies
View Related
Apr 13, 2007
Does anyone knows a simple way to insert a table on a MultiPage UserForm ?
This MultiPage appears on a excel spreadsheet when the user click on a button. I would like to put a table on one of the pages such that the user can fill in this table.
View 5 Replies
View Related
May 6, 2007
I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?
View 2 Replies
View Related
Mar 30, 2013
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB:
Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
View 2 Replies
View Related
Nov 7, 2011
I have placed next and back buttons in the userform. I have a total of 8 pages.
The problem is that page 2 and 4 is not active. And I cannot see why. In the properties of the pages the data is exactly the same at all pages.
Are there errors in my code?
Code:
Private Sub cmdNext_Click()
MultiPage1.Value = MultiPage1.Value + 1
End Sub
Private Sub cmdBack_Click()
Dim intPage As Integer
intPage = MultiPage1.Value
Do
[Code] ..........
View 2 Replies
View Related
Nov 17, 2011
I have two pages in the userform. What I was trying to do is that certain textbox (txtDate) needs to be entered on the page1 before going to page2. The user can still select page2 however I want the vba to bring the page back to page1 if the data is missing.
Here is the code:
Private Sub MultiPage1_Change()
If MultiPage1.Value = 1 And txtDate = "" Then
MultiPage1.Value = 0
txtDate .BackColor = &H40C0
End If
It didn't work completely - the tab selection on top was on page1 however all the controls shown are still the controls under page2. I have to manulally click page1.
I also tried MultiPage1.Page(0).Enabled=True but it didn't work either.
View 3 Replies
View Related
Mar 21, 2004
I have a multipage on a userform and wanted to change the back color. I can change this color fin for buttons and the userform itself, but I don't see the option in the properties for a multipage. And I didn't see it as an available command from vba. Am I missing something here?
View 9 Replies
View Related
Nov 2, 2006
re: Validating Textbox to work on a simple form.)
View 2 Replies
View Related
Feb 13, 2007
What I'm trying to do:
Create a "search" userform that pulls data from a spreadsheet of raw data (hardware specs) and organizes it into a multipage control. Each page of the MultiPage has a different piece of hardware with simliar data entry categories (height, weight, calibration date for example).
Each page at the moment contains labels and textboxes only. The idea is to place data from the spreadsheet into these textboxes, and create new pages as needed during runtime.
My current issues:
Just for testing/ debugging, I have a "_Change()" code that is triggered by changing pages within the Multipage. When I run the control, I trigger the change, but the textboxes and labels disappear.
I don't have much code to show, other than basic _Change() structure containing a msgbox for debugging.
This is related to a locked thread, where "imgUpdating" and "DoEvents" were referenced. I tried DoEvents, without success. I also don't know what "imgUpdating" is, but it sounds like it helped the other person with a similar issue:
UserForm Controls not displaying at runtime
View 7 Replies
View Related
Jul 20, 2014
I've got a table in a worksheet. Every time the user double-clicks on one of the cells containing the names for each of the listed items, a userform pops up displaying information about that item. Besides other controls, this userform has an Image Box, that displays a picture of the item, and a Multipage.
What I want to do is to display the same picture shown by the Image Box, on to the Multipage, using the same file, but, and here's the quirk, aditionally, change it's size, turn it monochrome, and set its transparency to a different value.
I've attached an example of the final look I'm seeking. This was done by prior editing of a copy of the image and inserting it using LoadPicture, but this solution is too troublesome as this is done solely for aesthetical purposes, thus not justifying all the hassle a user has to go through everytime he wishes to add a new item to the table.
View 1 Replies
View Related
May 9, 2009
I've started experiencing a strange problem. The control toolbox keeps appearing when the first page on a multipage userform is activated. I can't figure out what's causing this, and after searching the forum, with no luck, I thought I would see if anybody else is experiencing the same problem, and how to fix it.
View 2 Replies
View Related
Dec 3, 2006
I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.
The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?
Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Private Sub CommandButton1_Click()
Dim pPage As Page, cCont As Control, vCont As MSforms.Control
'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)
View 4 Replies
View Related
Dec 29, 2006
I have successfully created validation code that operates as a command button. The code listed below identifies in a MultiPage UserForm non- null TextBoxes whose pair of associated OptionButtons have not been selected. (The TextBox and OptionButtons all lie within a Frame and their are 60+ sets of these throughout the UserForm.) A MessageBox alerts user to select one of the OptionButtons.
Private Sub CommandButton1_Click()
Dim cFrameT As Control
Dim cCtrlF() As Control
Dim pPage As Page
Dim cCtrl() As Control
Dim Num As Integer
Dim FNum As Integer
Dim vOpt As Boolean
Dim Opt() As String
Dim lPage As Long
Dim vFrame As String
Redim Opt(Num) As String
Redim cCtrl(FNum) As Control
Redim cCtrlF(Num) As Control
Num = 0
FNum = 0
' Loops through all Multipage pages
For lPage = 0 To Me.MultiPage1.Pages.Count - 1..............
View 2 Replies
View Related
Mar 8, 2008
I am trying to figure out how to initialise a multipage userform. I have two worksheets, one with a contact 'database', and one temp that holds search results.
I understand how to load data from the worksheet and write it back using a single useform, but this is foxing me just a tad!
View 3 Replies
View Related
Feb 4, 2014
I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
VB:
With Sales
If .MultiPage1.Value = 0 Then
Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption
End If
End With
View 3 Replies
View Related
Dec 8, 2008
I'm trying to create a userform to act as a walk-through for a process. I've settled on using a multipage to conserve the required screen real-estate, and break the process into natural 'stages'. I've happily got these stages fixed into the userform's pages, with a couple of command buttons running events OnClick - but cannot figure how to get the spinbutton to navigate between the pages.
View 5 Replies
View Related
Oct 22, 2012
I have a MultiPage User Form, it has 2 tabs within the User Form.
I want to display Tab #1 (the first tab) as the 'visible/active' Tab for the user upon opening the user form. How do I do that?
Usually, I would open a User Form with frmMyForm.Show in a private module, to show the form. But now I have 2 Tabs, and want to select a certain Tab upon opening it?
View 2 Replies
View Related
Dec 21, 2009
I'm using MultiPage in a UserForm
I have multiple worksheets that can range from: HOLE 1 and go up to HOLE 30
I have other multiple worksheets that can range from: SAFETY 1 and go up to SAFETY 30
When I use the Code below it always goes to the 1st worksheet named either HOLE 1 or SAFETY 1
How can I have it so that when I click on the MultiPage Tab that it goes to the last sheet on the right for each?
Example: If I'm on SAFETY 5 it would go to that sheet, and not SAFETY 1 like it does now.
Here is my
Private Sub MultiPage1_Change()
Select Case MultiPage1.Value
Case 0 'page 1
Workbooks("Workbook.xls").Sheets _
("HOLE 1").Activate
Case 1 'page 2
Workbooks("Workbook.xls").Sheets _
("SAFETY 1").Activate
End Sub
View 11 Replies
View Related
Apr 8, 2008
I wanted to create a userform with multipage. On the first page I want to use a ComboBox that would allow the user to select the customer. The customer name is on the sheet that I named "Customer" which also contains the street address/city/state/zip. What I would like is, once a customer is selected, I want a textbox that will be populated with the correct address taken from the sheet named "customer".
On the second page I'd like to use it for Product Info. I want to have a ComboBox, Text Box, a Command Buttons. The ComboBox is to select the "Model#" from the sheet named Product Info" and the TextBox is for the user to write their comments. One of the Command Button is to be view a sheet named "Quote" and the other is to send the "Quote" through email.
View 2 Replies
View Related
May 3, 2012
I have several non-modal userforms in my App, some of them have date-fields that require manual entry typing of dd/mm/yy etc (No single userform has more than one date-box in it, this I think may be pivotally useful)
Now the Userform 'Calendar' that is built on the class of the same (cCalendar) name, has the write value line 'ActiveCell.value = theCal.value'
I'm looking to change this to refer to the correct userform.Textbox value, depending on which form is open.
I would imagine I could simply have a global string, whose value is set (or re-set) whenever a Userform is initialized (some sort of 'ActiveUF.value = Me.Name), where I get lost is referring to the components by name, so as to have a case statement by where I go:
Code:
Private Sub theCal_AfterUpdate()
Select Case ActiveUF
Case "AddForm"
application.vbe.components("AddForm").controls("AddFormDatePicker").value = theCal.value
Case "EditForm"
'.... etc
end select
end sub
better way of doing this (instead of passing around the userform name as a variable) - or proper syntax for referring to controls outside of the 'active' userform (but an open userform nonetheless)?
Every time I have to do this particular thing with userforms, I completely forget how, and the object browser always leads me on an infinite loop of Application.vbe.activevbproject.vbcomponents.vbe.active....
PS - there may be one slight complication to the process - one of the forms, has a 2-tab page in it, each page having similar (but named differently) fields. So I may need to be able to throw in 'Activepage' or whatnot
View 5 Replies
View Related
Apr 8, 2009
I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.
View 9 Replies
View Related
