What are the differences/advantages to these 2 controls in a User Form?
I have already seen that the tab strip doesn't seem to toggle b/t pages, as a frame I placed remained on both "tabs" (I am wondering what it does if you can't toggle).
what is the differance between a multi page control and a tab strip control
View 4 Replies View RelatedI have a MultiPage userform and I'm adding (4) control buttons - CancelButton, BackButton, ForwardButton and FinishButton. On the first page, those names are fine but when I get to subsequent pages, I get an ambiguous error if I try to name the controls the same. But the code will all be the same. What am I missing? In an example that I have, the user was able to name all the controls with the same name. What setting would control that?
View 5 Replies View RelatedIs it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
changing two variables a various amount of times and running the same procedure and copying the resutls into another sheet. Seems like a perfect place for a macro. However, these variables can be chosen from a list that the user wants. So why not build in a listbox for each one. Now I have two listboxes one for variable A and one for variable B.
The procedure in theory goes something like this we change variable A from the base case and then run the procedure for variable B, get the results, then run the scenario again but changing only variable B abnd repeat. Then once, all of the variable B scenarios are done, I want to change the variable A and then repeat and so forth.
That is the background and my main problem at this point, is that have these values in two listboxes, I know how to do the for each loops and such, however, I do not know how to do them for values in the listbox.
How do I identify the values selected in the respective listboxes and then pull them so I only use them for the for each loop?
I have the following code in a module that works fine for referencing a textbox on a page of a multipage on a userform, but I'm stumped trying to figure out how to reference the page object itself vs the multipage then referencing the page later. My code is:
Code:
Dim a As MultiPage
Set a = UserForm1.MultiPage1
a.Page2.P2_ScoreTotal.Value = (Val(a.Page2.P2_Q1_Score.Text) +
[Code]....
Can i have the caption of a multi-page tab caption change on the result a given cell?
i.e. in the attached example i would like page 1 to be the result of B2.
I retrieve data about local reservoirs (elevation, precipitation, gated release, ...) from a web site [url]. Retrieving the reports requires manipulating three drop boxes ("Select lake", "Year", "Data Type"). After that, I copy the data to the clipboard, and, back in Excel, push a button that pastes the text and extracts the data.
I'd like to programmatically manipulate those controls so that data retrieval can be completely automated.
I've got a userform with multiple pages, and in my userform initialize sub I set the focus to "combobox1" on "page1". When a user is on page2 of the form and clicks my "ClearData" button, which calls the initialize event, I get a run time error 2110 - "Can't move focus... etc" I would like users to have the ability to clear the form and start over no matter what page they are on.
View 8 Replies View Relatedi'm trying to build an app that'll take a user through 5 or 6 steps of a process, with maybe 2-3 substeps in some steps. right now i'm currently using a multipage Userform , but all the tabs make the whole thing look cluttered (even when there's a "Next" button in plain sight). this is especially because i've put each substep as a multipage form under that step's page (multipage forms inside a multipage form). so steps 1-5 would each have their own pages (1-5), then in page 1 you'd have another multipage form (1.a. - 1.c.). is there a way to make it look simpler? i'd like it to look a bit like a Wizard (ie remove all the tabs), but the only way i can think of is to throw a whole heap of controls on one page, and turn them visible/invisible each step of the way.
View 4 Replies View RelatedI have a userform that has a multi page on it with 4 pages. I notice that there is no way to have the individual pages be set to a click event- or none that I see anyways.
What I am wanting is for a series of events to happen based on what page the user chooses from the four (like a userform initialize type event).
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
Whats the VBA code for transfering selections on a multi select list box to a page.
ex. the list box has selections from 1 to 20 and I want to select 3,4, and 5
then on the page I want it to say 3,4,5
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name
how to strip the time from a date formated field using "=INT()". At the moment this works fine for me but I wonder if there is a possibility to strip the day form the datefield as well.
View 10 Replies View RelatedI have a range of cells where I need to strip out the numbers using a formula, is this possible?
E.g.
The data is:
110205 Contract Revenues
110215 Job Revenue
110802 Consumables
This would need to be:
Contract Revenues
Job Revenue
Consumables
I have a spreadsheet which has a "User Description" column. In this column, most users have data that looks similar to this:
APPLICATION - john.smith@mycompany.com
APPWEB - jane-doe@somecompany.com
APPWEB - john_doe@othercompany.com
APPLICATION - TP - paul@acompany.com
APP/APPWeb/DEV - paulsm@thecompany.com
There are also cells in this column which literally have a sentence long description, but those are not my focus. What I need to do is find a way to strip out the e-mail address found in the examples above and copy them into a new cell (the same row for the corresponding user). I don't know where to begin for this.
Excel 2003
I have two columns of Data:
Column A Origin
Column B Destination
Each column contains:
KANSAS CITY MO 25300 RICHMOND CA 11300
I would like to strip out the 5-digit code
My worksheet is named "data"
How can I strip out a name from a cell, see example below, I would need to remove the number and flip the name.
example:
Column A = Column B results
Blow/Joe 123456 = Joe Blow
Johnson/Mike 898930 = Mike Johnson
Mama/Joe 293810 = Joe Mama
Smith/John 389301 = John Smith
I've a column of data as below:
ROACH (#21)
SHARK (#11)
SHARK (#13)
UNICORN (#26)
ROACH (#20)
TRIGGER (#09)
UNICORN (#06)
UNICORN (#09)
UNICORN (#11)
VIMBA (#03)
VIMBA (#04)
TRIGGER (#06)
ROACH (#07)
ROACH (#08)
ROACH (#10), UNICORN (#24)
What I need to do it to strip off all the characters after the first space.
I assume I can use FIND and then LEFT, but how to I put this into a Macro?
I have a problem with a spreadsheet my colleague at work has designed. He has entered all the names into it as Mrs A Jones, Mr P Smith, Mrs S Pilkington-Smyth etc. I need to sort these into Alpha order using just the surname. macro or a formula to count backwards until I get a space and then strip this off to allow me to sort it.
View 2 Replies View Relatedformula to strip apostrophe for lookup formula to recognize text as a number.
View 9 Replies View RelatedI have just done a vba project of striping chars (QOOO1=) from each cell
and then sorting the records on column6/question6
however i have been able to do this and display results in second worksheet(Results2)
I feel there is a better way to do it and display the results on same worksheet
Could anyone take a look at the file and help.
IMPORTANT:Place curse on "Results2" worksheet and run the macro:Pres
Do not run the macro on main sheet all data will be lost and will have to download again.
File:[url]
Exported data in PDF and converted to Excel worksheet and some of the data contains a space in the year.
Example: 2/6/2 014 2:49 PM.
I used the =INT(A1) to strip the time off. Worked wonderfully. However when I need to sort by ascending/descending date , it does not put in order due to this extra space. Is there a formula out there that I can use to delete the space? All of the data doesnt appear this way. I am sure it is due to the conversion.
I want to strip only the leading set of numbers from a string. Trailing numbers should stay.
Logic rule would be:
1) Find first Alpha character
2) Remove all numbers prior to this position
Code:
Original string Desired string
42114DEP DEP
050114OP2OP2
0514OPOP
050214BKCKSBKCKS
05214CKCK
0502CKSCKS
050214CKS-3CKS-3
050214CKSACKSA
050214OPOP
50214PSCASH1PSCASH1
050214PSCKSPSCKS
0502SALES SALES
I need VBA to remove more than 3 blank spaces after the city & replace them with a comma & one blank. For example:
All in one column AB starting with row 7 I have:
Johnson City (13 Blank Spaces) NC 75503 (1 to 3 spaces after state & is OK)
Jacksonville (10 blank spaces) Fl 23854
Henderson (12 blank spaces) NH 28363 (12 blank spaces)
etc
I need all in one column AC starting with row 7:
Johnson City, NC 75503 (,space before state, same space after state ok)
Jacksonville, FL 23854
Henderson, NH 28363
etc
Is there an Excel function that can strip a specificed unwanted character from a text string to leave all the other characters excluding the unwanted one?
e.g. if the original text strings were (in separate cells within a workbook):
C-2C-9C-9-XA-10A-10-BA-10-XA-8N-7-D
The function would strip the "-" to leave:
C2
C9
C9X
A10
A10B
A10X
A8
N7D ...etc.