Refresh All Pivot Tables On Worksheet When Cell Changes
Dec 23, 2008
I have a dashboard that I created that is driven off one source of data. I have several lists and pivots created from that single source. I have two cells that are driven off of lists that then drive the pivot table. When a user selects an item from the drop down list I would like the pivot table to update. I have two tables like this on the main dashboard. Once the user selects the first data point, the table refreshs as does the second drop down list. After they select the second data point, the second privot table will refesh. Manually everything works prefectly, but when I attempt to automate it with VBA, it will only update the initial pivot and the secondary list, but not the second pivot.
I have posted the current code below.
"SelDept1" and "Wave" are the two cells that contain the drop down lists.
Private Sub Worksheet_Change(ByVal Target As Range)
Application. ScreenUpdating = False
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
I have a pivot table linked to a moving dataset, so I want to refresh it every 10 minutes. I can find the option to do this but it is greyed out. How do I enable it? (Excel 2003)
I have this code in an active worksheet that works with the exception that when I try refresh other Pivot Tables with the file that it goes into a constant loop.
Private Sub Worksheet_Change(ByVal Target As Range) ' ' Update the pivot table on this worksheet if data in columns A or B is changed ' If (Target.Column = 1) Or (Target.Column = 2) Then ActiveSheet.PivotTables(1).RefreshTable End If End Sub
I'm hoping to automate some pivot table refreshes. I've got a dozen pivot tables on a sheet all with different numbers. I'm hoping I can write a code that loops through the pivot table names and runs the refresh. Here is the code as it is right now. I've essentially copied, pasted, and changed the name of the pivot table for the refresh.
I would like to create an array in vba (22,21,20,19,18...) that renames the PivotTable and runs the code.
sub Refresh () Dim pt4 As PivotTable Dim Field4 As PivotField Dim NewCat4 As String
This is the first time I’ve tried to use VBA. I’m using Excel 2000. In my excel workbook have 1 sheet called “Cards” in which I Change data in one cell $B$2 (enter a part number) and formulas in this sheet return many values from another sheet “Card Data”. In the “Card Data” sheet, formulas that look through a sheet “Sales Book” and return the data that pertains to the Part Number I entered in the sheet “Cards”. In the sheet “Card Data” there are 3 pivot tables (“PH CALC”, “PH QTY”, and “Pivot Table 3”) that use the Part Number data to show 3 different sets of information. The pivot tables are the source for 3 charts in the “Cards” Sheet.
Problem: Pivot tables don’t automatically refresh. I would like to use VBA code to automatically refresh the pivot tables in the “Card Data” sheet when I change the Part Number in cell $B$2 of the “Cards” sheet, which, in turn, would then update my charts in the “Cards” sheet.
When we create a database in an Excel Spreadsheet and then some pivot tables, we use to copy the spreadsheet with another name, in order to clean the data and update it with another date (for instance, one excel spreadsheet for one BU or country, another one for other bU or country), to avoid creating the pivot tables again and again.
However, when we clean up all the data and enter the new one, on the Pivot Tables fields, you still see the "old data that was deleted"... Do you know if there is a way to delete that data without recretaing the pivot table?
I have 2 drop downs that when changed, auto refresh all pivot tables. My problem is getting the columns to auto-adjust based on the refresh or change of the data in the pivot table. Listed below the code I have thus far for the auto-refresh on pivot tables. How to auto expand all columns simultaneously.
The pivot tables are based off of tables on a different sheet(TOS Tables). So the code listed below is in the table sheet, not the pivot table sheet (TOS Customer Level). So followup question will be, which sheet to put the auto-expand columns code?
VB: Private Sub Worksheet_Calculate() 'If data on this worksheet changes, refresh the pivot table Sheets("TOS Customer Level").PivotTables("PivotTable2").RefreshTable Sheets("TOS Customer Level").PivotTables("PivotTable5").RefreshTable End Sub
I have a workbook with a lot of commercialy sensitive data. I have created various pivot tables from that data which I want to copy to a new workbook without retaining the link to the original data, so I can send it to a number of suppliers.
The shared worksheet resides on a secure network drive, so I can access it from anywhere. For years, I've had my secretary cut and paste out separate reports on individual salesman booking/commission performance. I thought taking advantage of Excel's native Pivot Table features, would save an awful lot of work, and probably lessen the chance of errors. Then I discovered that Pivot tables don't work with shared workbooks.
So I tried un-sharing the file. I discovered that the Pivot tables worked fine, but that I had to re-create them ( seven sales guys, 4 independent geographical territories) each reporting period. The Pivot tables weren't dynamically updated each time additional orders were added to the main list (entry worksheet). I was very careful in laying out a new version of the "entry worksheet", and eliminating any unecessary column and rows. My immediate thought is that for the Pivot tables to work dynamically, I have to have dynamic ranges in the entry worksheet.
I have a query with ODBC connection to a SQL database. This query's parameter is linked to a cell. The resultant data is the source for a pivot table. I want to refresh the pivot table, when the query is run. I've tried using the cell that triggers the query....but the problem is that the query takes about 10 seconds to run. By the time the query returns new data....the pivot has already refreshed. I need it to refresh AFTER the query is complete.
I tried adding a cell that sums up the data from the query...thinking when THAT changes (due to updated data), to trigger the pivot refresh. Problem is that I don't know the trigger for when the sum cell changes (ie....formula change, not typed in.)
The first sheet is the row data given to me, the second one is where I want my data to be analysed automatically by macros.
I managed to create a pivot table manually to give me the info I want but then I still have to copy all the results from the pivot table sheet to my analysis sheet.
How can I create a macro able to do all that by it self? I tried to record a macro using the recorder but then when I try to play it it gives me an error straight at the beginning in the definition of the pivot table I think.
An example of what I want the pivot table to do is: in the first sheet, go in the small table in column K and L, take the value of L1, then in the row data in column A to J, in column C look for the value in L1, once found, look for the value 1 in column J then do the average on the values in column E and put the result in my second sheet in cell F5 then do the same but look for 2 in column J and put it in F8, then 3 in F11, ... until 7 found (the data is in ss.000 and so the results in the second sheet should be formated the same way) then do the same all over again for value in L2 etc etc etc
this should be done for the 6 values in column L, each having values up to 7 in the J column.
Then I need to do the same for other columns and not only averages but minimums as well but I can adapt the code I think.
Using Excel 2007.I have references set for Microsoft ADO Ext 2.8 for DDL and Security and Microsoft AciveX Data Objects 2.7 Library.
I am trying to refresh tables in Access dbase from Excel.
I am receiving this error:
Run-time error '3709' The connection cannot be used to perform this operation. It is either closed or invalid in this context
Debug points here
Code: Set adoTbl.ParentCatalog = adoCat
what I am doing wrong?
Full code below
Code: Option Explicit Sub RefreshLinks() 'Comments: 1.)Refresh linked tables ' 2.)Set Reference To Microsoft ADO Ext. 2.8 for DDL and Security ' 'Date Developer Action '--------------------------------------------- '02/01/12 ws Created
I am trying to update multiple pivot tables from different OLAP cubes based on the same cell value that an user defines, namely one country for which he/she wants the create the report for. The code I recorded goes like this:
VB: Sub TUR()
Sheets("Pivot").Select ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _ ClearAllFilters ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _ CurrentPageName = "[Geography].&[TUR]" End Sub
In this example, TUR stands for Turkey.
Basically, I have over 20 countries and at least 3 different OLAP cube-based pivot tables in my report, I can do it with 3 x 20 different macros but that seems like taking the long way.
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
I have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
I have 12 months worth of data in twelve separate workbooks each with a pivot table, I have copy/moved the pivot table tab from each into one workbook so now I have a workbook that consists of 12 tabs each with a pivot table. What I would like to be able to do is create a summary table with the full years data; where I am running into problems is that each months table has slightly different row and column counts and labels making any formula like =sum([sheet 1 cell a1]+[sheet 2 cell a1]) problematic.
I've got 4 pivot tables (all derived from the same base data) on 4 separate worksheets. I've been able to (with this help of this site) to use VBA to hide pivot items on all of these sheets using a list on a user form. Hide/Show Pivot Table Field Items. Hide Pivot Table Fields Pivot Items by Criteria
I now need to be able to show all the pivot items on only 3 of the 4 pivot tables, with the 4th pivot table being left untouched. For ease assume that my sheets are sheet1, sheet2, sheet3, and sheet4. The tables I wish to update are on sheet2, sheet3 and sheet4. The pivot table on each sheet is called "PivotTable4" and the pivot item is called "Business". The pivot item contains 12 business names (Business1, Business2 etc etc)
Is there an easy way of doing this? I've spent the day looking through the internet and various "Dummies" books but with little success, I fear that I'm obviously below even Dummy level
I have a pivot table being created from multiple sheets in a workbook. This pivot table is created in the same workbook. Now how do I refresh this Pivot sheet automatically when any of the worksheets are updated. Even manually I am not able to refresh since the Refresh data menu is greyed out.
I've used this code prior and it worked fine in Excel 2007, now I'm having issues with it. Originally every Pivottable & Query pointed to a different CSV file. Now I have two pivottables built off a Excel worksheet that is built from a Query. This allows me to do some complex lookups that I couldn't do with just the Pivottable and MS Query alone.
Here's the code that's failing out: Any problems with it in Excel 2007?
Private Sub Update_All_Data_Click() Dim pvt As PivotTable Dim ws As Worksheet Dim qt As QueryTable
mytitle = "This will refresh all data for validation, are you sure?" Msg = "The Refresh process takes about 5 minutes, are you sure you want to continue?" Response = MsgBox(Msg, vbExclamation + vbYesNo, mytitle) Select Case Response Case Is = vbYes ' Do Nothing, continue with program Case Is = vbNo Worksheets("instructions").Range("a1").Select End End Select
For Each ws In ThisWorkbook.Worksheets For Each qt In ws.QueryTables qt.BackgroundQuery = True qt.Refresh Next qt Next ws
For Each ws In ActiveWorkbook.Worksheets For Each pvt In ws.PivotTables pvt.RefreshTable Next pvt Next ws
mytitle = "Confirmation of data refresh" Msg = "The data has been refreshed" Response = MsgBox(Msg, vbExclamation, mytitle)
I am running XL 2008 on a Mac and have created a pivot table that works well. However, without VBA (and I don't know how to write in Applescript), is there a way to put a REFRESH button on my spreadsheet?
I now have a Pivot table on my worksheet that works great, the only problem I have is I would like it to refresh my data at the push of a button. I now have to click on a cell where the pivot table data is>right click the mouse>select refresh data and then I get the updated info. I know you can install a button to to this exact same thing but I don't quite know how to. I need step by step instructions. I tried OzGrid search, but did not find exactly my need.
This is what I did thus far I opened my work book>click on data>then macros> record new macro>I got a pop screen>I named the macro Refresh_Pivot_Table>store to this workbook>click OK> I see at the bottom left of my screen that the macro is still recording> I then highlighted the Column of cells where the pivot table data is and then clicked>tools>macro>stop recording.
This is the point where I'm lost. What is the next step to do? When I go back to the cell where I began to start the macro and right click I don't get the option to create a text box so that I can make a button and assign the macro I just recorded. Is this the correct method or did I miss something?
I have a macro to refresh all pivottables in my workbook. Each pivottable source from the same data pool - in addition I have a filter on each pivottable. Is there a way to fix this filter, such that once the source data is updated, the filter doesn't change? Or to only refresh the "data" in the pivottable?
My code for refreshing all pivottables is given below.
Dim pvt As PivotTable Dim sh As Worksheet Application.Calculation = xlManual For Each sh In Worksheets For Each pvt In sh.PivotTables pvt.RefreshTable Next pvt Next sh Calculate Application.Calculation = xlAutomatic
