Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
Sub Macro1()
ActiveSheet.PivotTableWizard SourceType:=xlPivotTable, SourceData:= _
"PivotTable1"
End Sub
I have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
I have 12 months worth of data in twelve separate workbooks each with a pivot table, I have copy/moved the pivot table tab from each into one workbook so now I have a workbook that consists of 12 tabs each with a pivot table. What I would like to be able to do is create a summary table with the full years data; where I am running into problems is that each months table has slightly different row and column counts and labels making any formula like =sum([sheet 1 cell a1]+[sheet 2 cell a1]) problematic.
View 3 Replies View Relatedif there is a way to display a table as column percentages but have the totals as raw numbers.
View 9 Replies View RelatedI am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I am trying to update multiple pivot tables from different OLAP cubes based on the same cell value that an user defines,
namely one country for which he/she wants the create the report for. The code I recorded goes like this:
VB:
Sub TUR()
Sheets("Pivot").Select
ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _
ClearAllFilters
ActiveSheet.PivotTables("PivotTable1").PivotFields("[Geography].[Geography]"). _
CurrentPageName = "[Geography].&[TUR]"
End Sub
In this example, TUR stands for Turkey.
Basically, I have over 20 countries and at least 3 different OLAP cube-based pivot tables in my report, I can do it with 3 x 20 different macros but that seems like taking the long way.
My input data for Pivot table has a column named "Month". The month values are like April 07, April 08, Nov07 in random order for period between Jan 07 to Aug 08.
When I create a pivot Table, this column is sorted alphabetically (April 07 is followed by April 08) but I need it to be sorted in the ascending order with respect to month (April 07 is followed by May 07).
I further use this data to plot a Pivot Chart. There is another issue here. I want to use separate colors for each series. I do not know how to achieve above 2 things.
I have a portfolio of 23 funds and I need to calculate IRR for each one every month.
The problem is that I have dispersed information for each fund.
For instance in sheet CashCallsBD I have a table with the funds cash calls. This table has a first column with the Fund Name then other column with the cash call date, another column with the cash call value. This table may have other columns. One fund may have several cash calls.
In sheet DividendosBD there is a table with some columns that refer to cash distribution movements. The main columns relevant for this case are Fund Name, Date and finally Cash Distribution (signed in red in the attached document)
And then my problem: In order to calculate IRR for each fund I need to create a table (for each fund) that merges and sorts the information of CashCallsBD, Dividendos BD and present market value for each fund and then apply the XIRR function. For each fund this sorted table would have at least 2 columns (date and values).
Have been going round and round on this! I have a set of data that shows sales dollars by weeks. Currently, that data is in a Pivot table. I'd like to have a macro that selects the weeks (1-52) based on my input. For example. If I want to see weeks 5-52, I want to be able to input "5-52" somewhere and have a macro run that will select weeks 5-52 in the pivot table instead of having to go in and manually select each.
View 1 Replies View Relatedwith this macro?
I have a lot of pivot tables on multiple sheets in one workbook.
I want to deselect all "(blank)" from rows, and sort both rows and columns in ascending order.
I recorded a macro but it only refers to specific pivot tables, I would like it to do the same sorting for all pivot tables in the workbook.
Sub PivotBlankSort()
'
' PivotBlankSort Macro
'
'
Windows("Alt Assessment Y10 13-14.xlsx").Activate
Sheets("L&C Prog Sum2").Select
With ActiveSheet.PivotTables("PivotTable10").PivotFields("English")
.PivotItems("(blank)").Visible = False
[Code]...
etc as I move to each separate pivot table.
I am having a lot of trouble with pivot tables in Excel 2007 VBA. I am trying to create pivot tables using macros (connected to buttons the user can press to create the pivot table) - please don't ask why, but i need to do this!!!
I used the record fuction in excel 2007 to produce macro code which will produce the required pivot tables when the user presses a button.
Unfortuanately the coding seems to work fine when i have one pivot table in a file but breaks down if i record code to produce another pivot table.
I have attached some code below (which was produced by the record function) and is intended to produce 2 seperate pivot tables (the macro submacro2 produces the 1st pivot table and the macro submacro4 lower down the page produces the 2nd pivot table). I have also indicated the point in sub 4 where the code breaks down - basically submacro4 just doesnt run!
Background: I know ZERO about VBA and I am a Vlookup & Pivot Table noob, but experimenting everyday.
Every week, since August 29, 2009, I get a sales report from my customer in raw form showing point of sales data for the previous 7 days. After manipulating the data I end up with 11 columns.
Now, if I am only concerned with that one week then I can drop the whole sheet into a Pivot Table and all is well.
However, I have 12 sheets now (with more to come), one for each week, and the row count ranges from 3,328 to 16,414.
I do not want to consolidate the data.
I can copy everything to one sheet, and hope not to max out at the million row mark, but would prefer to keep it tabbed by week.
This is my data:
This is the Pivot Table I created:
The Pivot Table is exactly what I want and I like that I can also sort by school or district. The problem: Cells B6 through E6 show up with correct information but the totals below that are all wrong. They seem to pull the same data from question 4.
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
I've got 4 pivot tables (all derived from the same base data) on 4 separate worksheets. I've been able to (with this help of this site) to use VBA to hide pivot items on all of these sheets using a list on a user form. Hide/Show Pivot Table Field Items. Hide Pivot Table Fields Pivot Items by Criteria
I now need to be able to show all the pivot items on only 3 of the 4 pivot tables, with the 4th pivot table being left untouched. For ease assume that my sheets are sheet1, sheet2, sheet3, and sheet4. The tables I wish to update are on sheet2, sheet3 and sheet4. The pivot table on each sheet is called "PivotTable4" and the pivot item is called "Business". The pivot item contains 12 business names (Business1, Business2 etc etc)
Is there an easy way of doing this? I've spent the day looking through the internet and various "Dummies" books but with little success, I fear that I'm obviously below even Dummy level
For data I am using 1 pivot table. I have 4 tabs which use this pivot table to present different data on each tab.
For the first question, I have the same pivot table in the sheet twice in order to have multiple pivot charts with similar data but setup differently. I found this to be the simplest solution to presenting the data in the manner I want to see it. Otherwise I wish to set the tables up so that if I change a filter in one of the tables that the data is automatically updated to both tables.
The second question, this relates to the first question somewhat. I wish to change filters in 1 pivot table from tab one, and once that tab is updated I wish for all of the other tabs with this same pivot table to automatically update with the filter changes from the first time.
I have 3 different pivot tables (with 3 different data sources) on 3 seperate sheets (sheet2, sheet3 & sheet4). Each pivot table has a report filter which contains employees names. On sheet 1 I have a sort of 'dashboard' set up feeding from the data in the pivot tables, and a combo box form control from which I can select the employees names.
Currently, if I want to see John's data, I need to go to Sheet1 and select 'John' from the report filter, then goto Sheet2 and select 'John' from the report filter & the same for Sheet 3. I was wondering if it is possible to somehow link the pivot tables to the combo box - so that when I select 'John' from the combo box on Sheet1, it automatically selects 'John' in the report filters on sheets 2,3, & 4.
I have to track how well location managers are keeping track of skill competencies.
We rate skills as...
0 – know nothing ,
1 – read training manual,
2 – check off by manager.
I need the managers to provide these ratings then I have to report what locations need more training. When an new employee is entered into the system, the manager should give them a target of 2 for each skill the employee needs to gain. If the target skill is 2 rating higher than the current skill level, I have a column named Delta that records a 2.
I have learned how to use the pivot table feature. I can make separate pivot tables using filters that show…
a) how many 2s each employee has for a target,
b) how many 2s each employee has for deltas,
a) how many 2s each employee has for a current level and I can show the date the 2s where achieved
What I need is to learn how to combine all of this information on one pivot table (or report), but the filters really seem to make a mess of it all when it is all together. adding multiple sheets to one Pivot table.
Screenshots...
Count of Targets
Count of Deltas=2
Count of Current Skills
!What I need to produce!
[Code].....
I am trying to find a way to set up a macro that will allow me to pull in data - create the Pivot table - delete the table - then pull in fresh data (of a different row length - same number of columns) and create another Pivot table. I have tried to manipulate recorded code to no avail. Here is what I am starting with:
Const lngLastPossRow As Long = 65536
Range(Cells(1, 1), Cells(Cells(lngLastPossRow, 1).End(xlUp).Row, 24)).Name = "Data"
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:="Data"). _
CreatePivotTable TableDestination:="", TableName:="PivotTable2", _
DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable2").AddFields RowFields:=Array(" ", _
"Channel", "Sales/Exchange", "Mode of transp.", "Sold-to Party", "Material", "Data")
While it creates the first pivot table fine, after deleting it and starting again it wants to create the next sequence (PivotTable3) which crashes the macro. I must close the file and reopen to run it again.
I am just starting to use the wonderful pivot tables.
I have a long list of data which basically consists of the following info:
-Company Code
-Country
-Account description
-Account balances
The pivot table is set up like so:
Row labels - Company Code, then Country
Column Labels - Account description, eg Input Tax, Output tax, clearing account, import tax, acquisition tax, set off account
Values - Account Balance
The table works perfectly.
Now what I want to do is some calculations based on the fields
- a check that Acquisition tax = the negative of the set off account, (i.e net to nil)
- a sum of the balances in the import, input and output tax accounts
- a comparison of that last figure against that in the clearing account to identify a difference
I tried to do it using basic formulae but I can't drag and drop the formula down the rows.
And I couldn't make out what the calculated cell function does. It appears to only include the titles of my data and not the individual fields.
I have 9 pivot tables on different tabs that I would like to update based on a date I reference (date input in A1 ex. 9/1/2013). Is it possible to update the filter on all of the pivot tables by referencing a cell that would be the filter (date), so the pivot table will only return values for the date entered in A1?
View 6 Replies View RelatedI have ~ 300 pivots (one on each tab) all linking to one data set in the same workbook. I realized that I neglected to select the year 2006 in my column label for every pivot table and hoping that there is some way to
simultaneously update all pivots to include 2006 data instead of manually checking the box off one by one.
I have two pivot tables on one sheet and I want the page fields on the second to change when I change the first pivot table. I found the below code and have applied it to one of the three page fields I have, but can't seem to duplicate it for the other page fields:
View 7 Replies View RelatedI have multiple pivot tables with different data source. I wish to have one slicer which control all the pivot tables. I would have one common colum for all the pivot tables which is the one i wish to control for instance the person in charge. Note that all my pivot tables are from different data source. how to do it?
View 1 Replies View RelatedThe spreadsheet is comprised of 4 sales data sheets, one for each store. Each of these sales data sheets runs several pivot tables (One for dept sales, one for waste, one for sales on Selected UPCs etc) and I used to have 1 copy of each pivot table for each store (ie 24 pivot tables). Now I have found a way to have only 1 copy of each PivotTable which changes based on which store is selected using the following code:
Code:
Sheet13.PivotTables ("Top10LW").PivotTableWizard SourceType:=xlDatabase, SourceData:= _
.List(.Value)
This works great however I was repeating it for every pivot table I had in the spreadsheet, causing messy code and file corruptions.
Is there any code which I can use for updating all pivot tables, using as minimal code as possible, all in one hit?
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View Related