I found out a way to get rid of the street number from an address, but I would like the street and apartment number removed. Right now I have various formats:
Dilger Ave #61
Dilger Ave Apt 61
Dilger Ave Lot 61
I would like simply "Dilger".
I have a 2000 row sheet with an address field that contains the apartment number and the address. The text is displayed as unit number, then hyphen and the building/street number for example '101-1234 15th Street'. I'm looking to cut the building number from the cell and paste it into a seperate column. Ideally removing the hyphen completely, so that I have two columns 'unit number' and 'building/street address'.
View 5 Replies View RelatedI have a list of street addresses. I want to alphabetize them. I just want to remove all the text (usually just numbers but not always) up to and including the first space only.
View 7 Replies View RelatedAssume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I have an address list of 64,000 entries that I want to geo-code (the geo-coding isn't the problem...). A large % of addresses don't have street numbers and this just gives a general position based on the Post/ Zip code which isn't accurate enough - it needs to have an actual street number. I want to extract all of the addresses without a street number so I can cross check them with something else (not an Excel problem). Trouble is some of the street numbers are embedded in a string - might be a multiple NOT problem. Attached a sample file...
View 4 Replies View RelatedBasically, I have a huge list of addresses with ID numbers, and a list without the ID numbers. An example would be;
2-10 (evens), test road, ID123.
I need to identify if the address is on the street, is in that block of flats (i.e between 2-10, and even number), and then return the ID.
I've already split the number between two cells, but then its all gone a bit wrong.
I have a list of addresses, which are comma separated, all ending with a PostCode
How Can i strip out the PostCode field?
Sheet1, Column3 is filled with property addresses, if available (some are blank). I need two columns on Sheet2, Column3 needs to be the street number and Column4 needs to be the street name.
Because it is not 'fixed length', I can't use 'RIGHT' or 'LEFT'
I have attached a sample file. There is other data/information on the sheet, but I can process the rest without help. I will be moving:
Sheet1, Column1 to Sheet2, Column2
Sheet1, Column2 to Sheet2, Column1
Sheet1, Column3 to...as described above...
I have an address field that is concatenated as such that the city name is attached to the end of the street name as follows:
4 Example WayOakland, CA 94601
I have over 200 of these with different addresses and cities in my workbook so it's not always the same length. How can I grab the city out of this string? Is there a way to key on the capital letter of the city? Or is there another way?
When entering addresses in column G, need VBA Sheet Code to extract:
1 numbers of P. O. Box & Street & put in column K of the same row
2 words P. O. Box & Street Names & put in column L of the same row.
The pound sign is always used for the apartment number, etc, after the street name. For Example:
______G______|__K_|___L____
141 Radio #181 | 141 | Radio
P. O. Box 4932 | 4932| P. O. Box
102 E Arlington | 102 | E Arlington
I would like to be able to take an address like 18387 S 113Th W Ave and return it as 18387 South 113th West Avenue. I am a slightly familiar with lookup formulas, but I have not had any luck making this work.
View 9 Replies View RelatedI would like to change a number to a letter and then drop a digit from the end.
Say my data in A1 reads 81234568, and I would like it to display in cell A2 as h123456.
I am trying to create a excel file that takes information off the website (AAPL Annual Income Statement - Apple Inc. Annual Financials) based on a stock name I enter in the first excel sheet. So when I type in the stock name, and click on the Search button (runs the VBA program) i created, it will search on the website for that stock and retrieve the 5 years financial data. How can I incorporate web query function in it?
Sub AddNewWorksheet()
Dim Val As String
Val = Sheets(1).Range("B4").Value
Sheets.Add
ActiveSheet.Name = Val
ActiveSheet.Move after:=Sheets(4)
End Sub
What formula can i use to obtain the address of the cell which contains the highest number? My range is A:A
View 2 Replies View Relatedvery simple and short code.
Code:
Dim selection As Range
Dim minimum As Integer
Sub Sequence()
Set selection = Range(Cells(4, 3), Cells(6, 5))
minimum = Application.WorksheetFunction.Min(selection)
' and now I need an address of that smallest number for this:
' IF (column number + row number) > value of that smallest number
' do
End Sub
It's not exactly the program I need, but it's simple.
i'm looking to return the cell address of the max number in a given range?
View 3 Replies View RelatedI have the following text, in which I need separated into three columns.
Column A) Company Name
Column B) Address
Column C) Phone Number
I was thinking perhaps I could replace "-------" to just one "-" and use that delimiter to separate the phone number.
Then Use *** Company Name Here *** --> *Number Variable* and filter the rest..
But I don't see it being able to work.Here is the text I'm looking to format (Mind you there is about 8,000 Records.
And, it's all formatted like below. (Company Name, phone number being on different lines and phone number being separated by dash's
[Code].....
I am trying to do season stats for my roller derby league. I have a great spreadsheet going but the one thing I want to do, I can't seem to do. I am attaching a "test" file. very simple and small but shows what I need to do.
I have different sections and I am trying to pull the highest number out of that section. For this example, it is under the green Jams Skated: Jams at Jammer. The number on the right is the highest number of jams skated while the number on the left should be the name of the skater who has this number. Okay, no problems there. My problem occurs when I try to move these same formulas to another sheet. in this case, sheet 2. It pulls all kinds of strange things.
I have something like the following:
If Worksheets("RawData"). Cells(1, nColumn).Value = Worksheets("RawData").Cells(12, 16).Value Then
..do code (I know the cell location of interest at this point)
End If
Then I End up needing To Do something Like the following
ActiveChart.SeriesCollection(1).XValues = _
Worksheets("RawData").Range("L1:N1")
“L1:N1” above is a sample. Given the code above it I have the cell location in question but it is in the format such as .Cells(12,16). That doesn’t do me much good when range wants something like “L1”. I don’t know how to convert that (12,16) to a L16 for example.
I am setting a variable to the value of an absolute cell reference. I want to set the value of another variable to just the row value of that absolute cell reference.
View 4 Replies View RelatedI am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
For example, i have some data :
123,123567
12,778
9822,1
8267,222223
then, i want to permanently remove the comma, so the result :
123
12
9822
8267
Because if i use format cells -> use 1k separator, the data actually still contain the comma (even if the looks is 123, but in the formula bar, it stated 123,123567).
I always seem to have trouble with the Find() and MID() function when used together. I try to following the syntax but it keeping erroring...
I'm trying to remove all the characters before the first non-zero number.
e.g. ABC263080 becomes 263080
PROGO0123 becomes 123
I have a list for addresses in excel in single column as shown below - aanandhi narayanan 3430 chemin de riviere sanjose,CA95148
DOMINIC ABANO 3838 GLENGROVE WAY SAN JOSE, CA 95121
abdi abdi 5390 monterey rd #6 sanjose,CA95111
Sheribel Abinsay 3212 Gateland CT San Jose, Ca 95148
I need the result to be in a way like -
3430 Chemin de riviere
San Jose
CA
95148
3838 Glengrove way
San Jose
CA
95121
5390 monterey rd#6
San Jose
CA
95111
3212 Gateland CT
San Jose
CA
95148
I have around 12000 records with the same format.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View RelatedI have a column of 1000 folio numbers and need a formula that will remove the dashes like so,
35-30-19-041-0180 into
3530190410180
Image below has a 500 cells I want to delete the 12 digit number but the numbers that align to the 12 digit was in one cell so it is hard to do manually how to delete it
View 6 Replies View RelatedI have two sets of data and i would like to combine into one.
Problem is some may have duplicated part number.
My current method is copy & paste data from 2 different tab in to one and using data, remove duplicated to get what i needed.
i am looking macro code to fixing value/number from custom number format (with dot mark criteria) as my data and will be as displayed fixing (what you see if what you get)....
2004.09.000907 (custom format) --------- 2004.09.000907 (after using macro)
1998.08.000001 (custom format)----------1998.08.000001 (after using macro)
if you press F2 in the sample number will be not visible dot (.) mark..
how to make/do that the number look like using custom number but fixed (remove custom number format)..
it's possible using macro?
way to remove a varible number of characters in a cell? My example is in cell range A1:Z1 and each cell could have a different number of characters.
Smith, Sally 5348
Jones, Johnathan 7893
Doe, Mike 2223
What I would like to do is remove the second space and the numbers that follow to get a result of
Smith, Sally
Jones, Johnathan
Doe, Mike
