I would like to be able to take an address like 18387 S 113Th W Ave and return it as 18387 South 113th West Avenue. I am a slightly familiar with lookup formulas, but I have not had any luck making this work.
View 9 Replies
Sheet1, Column3 is filled with property addresses, if available (some are blank). I need two columns on Sheet2, Column3 needs to be the street number and Column4 needs to be the street name.
Because it is not 'fixed length', I can't use 'RIGHT' or 'LEFT'
I have attached a sample file. There is other data/information on the sheet, but I can process the rest without help. I will be moving:
Sheet1, Column1 to Sheet2, Column2
Sheet1, Column2 to Sheet2, Column1
Sheet1, Column3 to...as described above...
When entering addresses in column G, need VBA Sheet Code to extract:
1 numbers of P. O. Box & Street & put in column K of the same row
2 words P. O. Box & Street Names & put in column L of the same row.
The pound sign is always used for the apartment number, etc, after the street name. For Example:
______G______|__K_|___L____
141 Radio #181 | 141 | Radio
P. O. Box 4932 | 4932| P. O. Box
102 E Arlington | 102 | E Arlington
I have an address list of 64,000 entries that I want to geo-code (the geo-coding isn't the problem...). A large % of addresses don't have street numbers and this just gives a general position based on the Post/ Zip code which isn't accurate enough - it needs to have an actual street number. I want to extract all of the addresses without a street number so I can cross check them with something else (not an Excel problem). Trouble is some of the street numbers are embedded in a string - might be a multiple NOT problem. Attached a sample file...
View 4 Replies View RelatedI have a spreadsheet that is used for sales territories. In column A, I have customer names, in column B, I have the State abbrev., In column C I would like to return as salesperson's name based on the State.
Aco IL John Smith
ABco OH Jane Doe
Cco WI John Smith
Czco IL John Smith
Dco WY Adam Scott
Fco UT Adam Scott
FDco CT Bill Jones
etc WI John Smith
So I need a formula to enter in column C, that will return the correct salesperson based on the state in column B. (when auto filled down)
For example: IL,WI,MN,IA,ND,SD = John Smith
OH,PA,KY,MI, = Jane Doe
etc
I currently have data in the form of: "510 E. 96th Street, Suite 400 Indianapolis, IN 46240"
And need a formula to extract only the state abbreviation from the cell, any ideas? I currently have the formula, =MID(O333,(SEARCH(",",O333)+2),2) but it only works if there is one comma for example, it works perfectly on this data:
2K MEDIcal 105 West Torrance Boulevard Suite 106 Redondo Beach, CA 90277
writing a macro script. I want to find matching names on two diffferent worksheets. More specifically I need the ability to match if I apply a abbreviation(s) to worksheet one in order to get matches in worksheet two.
e.g Company = Co. or
Insurance = Ins
Please see my attached excel document for an example.
I have over 27000 lines so doing this manually will take forever!
Ideally I would like this to be a macro script that I can edit to add as many different abbreviations as required. The attached document will make my task a lot clear.
Unfortunately I don't have any starting code as I am not an excel/visual basic programmer, But i hope somebody will be able to help me out here.
The reason I need to do it this way is because I have been given a file from a partner company that uses different abbreviations to the ones we use in my company. I want to see if the companies in the list I have been given already exist in out company database, therefore we need a suitable matching procedure.
I extracted data going back to 1980 from Bloomberg and realized that BB uses abbreviations rather than pure numerical values. For example, 3,000,000 is "3M," 300,000,000 is "300M," etc. I need a macro that converts "M" into the actual value, "B" into the actual numerical value, etc. For example, a macro that converts "3M" into 3,000,000. I know that I can identify the values in VBA with "###M."
View 7 Replies View RelatedI have an address field that is concatenated as such that the city name is attached to the end of the street name as follows:
4 Example WayOakland, CA 94601
I have over 200 of these with different addresses and cities in my workbook so it's not always the same length. How can I grab the city out of this string? Is there a way to key on the capital letter of the city? Or is there another way?
I have a list of street addresses. I want to alphabetize them. I just want to remove all the text (usually just numbers but not always) up to and including the first space only.
View 7 Replies View RelatedBasically, I have a huge list of addresses with ID numbers, and a list without the ID numbers. An example would be;
2-10 (evens), test road, ID123.
I need to identify if the address is on the street, is in that block of flats (i.e between 2-10, and even number), and then return the ID.
I've already split the number between two cells, but then its all gone a bit wrong.
I found out a way to get rid of the street number from an address, but I would like the street and apartment number removed. Right now I have various formats:
Dilger Ave #61
Dilger Ave Apt 61
Dilger Ave Lot 61
I would like simply "Dilger".
I am trying to create a excel file that takes information off the website (AAPL Annual Income Statement - Apple Inc. Annual Financials) based on a stock name I enter in the first excel sheet. So when I type in the stock name, and click on the Search button (runs the VBA program) i created, it will search on the website for that stock and retrieve the 5 years financial data. How can I incorporate web query function in it?
Sub AddNewWorksheet()
Dim Val As String
Val = Sheets(1).Range("B4").Value
Sheets.Add
ActiveSheet.Name = Val
ActiveSheet.Move after:=Sheets(4)
End Sub
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I want to replace all defined range names in the sheet that start with "Street" to "Road"
For example I have 50 defined names in the sheet as such "Street-01", "Street-02"... all through "Street-50"
I want to change them all in vba to Road-01", "Road-02" etc.
I have set up a forecasting module for my company, which I update on a weekly basis.
Basically, I centered my forecast on an 8 week average. Using all of the various equations in a regression, the 8 week series of data is used close to 500,000 times for each week’s forecast. What I am trying to do is move the 8 week series (A#:G#) and change it to the next set of cells (B#:H#) without having to do it using a filter and change all of the various instances of the occurrence. Because of the nature of the forecast, I will be "rolling" it forward every week, so to be able to do this all at once each week would save me a bunch of time. I tried using the Find/Replace fn by having it use the * symbol in place of the #...and this worked when I had it Find the data, but when I tried to use it to Replace the data, it reported an error?
I have series of companies and output ,some values of output are missed how can be replaced by the average of nearst two years values of output or replaced by the following or previous value of output,sample of my data is attached.
View 4 Replies View Relatedhow i would remove telephone numbers in a particular spreadsheet which are preceded with 44 which need to be removed and then replaced with a zero.
eg. 441234567890
I want to be able to replace the bolded and underlined areas of this javascript i have pasted in a cell with the value located in another cell. This means that those numbers would be replaced by a similar thing located in another cell. how can this be done? The way I would think you would do this by defining that say =b8 (an example of where the data could be coming from is ann excel formula, but not sure how to do this ...
View 6 Replies View RelatedOne of my friend send me a problem. I got frustrated and scold him lot to do work like this but then I tried to work on it. Although my Vb experience is not good enough.
The problem is this that we have different things written in cells in column A like this “SET-EDT SPRAY 3.4 OZ & BODY LOTION 3.4 OZ & TOILETRY BAG “ and in some cells “EDT SPRAY 1 OZ”
Now we want to replace value Oz with value Oz / (Value * 3.75) ml. the below example will clarify the situation: ...
What it does is to activate the desired worksheet, and for 3 different choices replace what's there with what I want to be there. I put this together a while back, and it's working fine, but I'm sure it can be cleaned up a bit. Any help would be appreciated.
View 9 Replies View RelatedI would like to set up a worksheet where once an ID number is scanned, the next cell over is populated with that person's name. (i.e. Johnny scans his ID 234567 and in the next cell, "Johnny Smith" is filled in. I have a worksheet with the ID numbers in one column and names in another, I just don't know how to get a second worksheet with a formula that will allow me to do that.
View 2 Replies View RelatedI need a formula that will replace a dollar amount with an X. In other words...I have 10,000 cels and half of them have dollar amounts in them...I would like to replace them with the letter X without having to manually do it...
View 9 Replies View RelatedI am a not too good programmer, but I construct chemotherapy regimens for my medical department. They are used to minimise the risk of wrong dosing to patients, etc. Every regimen is an .xlt file, and about a third of them (there are about 100) generate, in addition to pharmaceutical prescription, automatic letters to patients (for those regimens where patients administer oral dosing at home).
These patient-letters have the hospital's logo on them (the logo is a "shape").
However, the problem is that another hospital also wants to use my system. So I will have to replace all these logos with the other hospital's. I would like to do this in an automated way. I have received the other hospital's logo also as a shape.
I have already constructed a data-inserting macro in a separate file. This macro systematically opens each xlt file and replaces the text in key locations according to the file the macro is in (geographical names, etc.).
Is it possible to automatically replace the logo-shapes in a similar way, with these additional facts/wishes in mind:
1. There is always only one type of shape (a logo) in the xlt files.
2. Even though the shapes are exactly the same, it is possible the names are different.
3. The exact location for the shape is different in each xlt file, so I'd like the replacement to get the same top left coordinate as the one it replaces.
I have constructed 2 different files with the same data-inserting macro, each containing one of the logos (so I can change back to my own hospital) and geographic data. When the data-inserting macro is used, I'd like it to identify the shape in the data-inserting file (there's only one shape in this file), copy it, then identify the shape(s) in the present xlt file, and then replace these, in the exact same location.
can anybody write a macro code for the following: We want to have five values representing operative time in a row with a mean in the sixth position. The hard part is to get a macro that will allow us to put in a new value in the first column and have it shift the other values to the right and dump the existing fifth value and come up with a new mean.
View 9 Replies View RelatedI'm currently building a large spreadsheet which will require numeric codes to be within certain cells. At present these cells are filled with alphabetical codes and the person using them has little knowledge of the numbers, is there a simple way for them to type in the alphabetical code and it to then auto-replace it with the numberical?
View 8 Replies View RelatedHave a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
I have a long list of locations in an excel spreadsheet, stating either the country (eg India) or for US locations the state (in a two letter format, eg NY). I need to change all the state location to say "USA". How can I do this, without doing 50 find and replaces? Can I do something based around the fact all the USA locations are two letters, whereas all the others are longer?
View 4 Replies View RelatedI have a file with some statistics on how agents at work performed. This file gets sent to all of them, but before we send it we change the names for a number, so that they don't know how the other agents are doing (avoiding comparisons). People had been doing this manually, but it's getting really complex as the number of agents is increasing. I know that this can be automatized, but I have no idea on how to do it. A simple formula with an IF statement wouldn't be sufficient. Here's an example of the data. The file that is to be modified to be sent to all the agents looks like this:
View 3 Replies View RelatedI'm working with a lot of documents where I need to replace numberID:s with words.
I have a table of 2 columns, where each number has a corresponding number that it should be translated to.
For instace:
1 - cpu
2 - fan
3 - bus
Is it possible to use this list to automatically Replace all the numbers in a document with their corresponding words?
(Without having to spend time on manually program some kind of macro)
