Basically, I have a huge list of addresses with ID numbers, and a list without the ID numbers. An example would be;
2-10 (evens), test road, ID123.
I need to identify if the address is on the street, is in that block of flats (i.e between 2-10, and even number), and then return the ID.
I've already split the number between two cells, but then its all gone a bit wrong.
I have several worksheets (Labeled Sheet1,Sheet2,sheet3) What I need to do is to step through each row in sheet3, and do a search in sheet1, it the data was found, then return the row number. I then will need to copy data from sheet1 (rowfound columnA , through rowfound CoulmnBd to sheet3 current working row columnK
View 3 Replies View RelatedIn my spreadsheet, on the first worksheet called "Working". Column A, called "Results", contains carrot ^ delineated string values in each cell (i.e."john^apple^pear^banana^grape^love^heart^pickle"). The majority of string values in every cell in my "Results" column match a "source" column of Pick-List Values, called "Fruits" in the same spreadsheet, however found in a different worksheet called "Lists" (also in Column A). I want to perform 3 functions against my "Results" Column on worksheet "Working":
1.) Report In Column B: Analyze column "Results" by cell and return carrot delineated string values for only those that match my "Fruits" Pick-List
2.) Report In Column C: Analyze column "Results" by cell and return carrot delineated string values for only those do not match my "Fruits" Pick-List
3.) Report In Column D: Identify and return all unique values in "Column C" as a List.
Attached is a simple example of what I'm trying to accomplish called " Sorting.xls"
I have a produced an Excel workbook which uses a VBA sign in/out userform.
Once you sign in on the Userform the sheets update. A list is completed of the times people enter and leave.
To make the code easier I currently have the name being returned to the excel sheet and performing a “match” function to return the row number. This row number is then used to carry out what I need to happen in this row. However, as you can see from attached doc (and the brief example below), based on IDnumber "2", the match function returns row 5 not row 8.
I need to have the row number returned for the IDnumber where the Out cell is blank.
This should be the last occurrance of the IDnumber
Example
Row
1 ID# In Out
2 1 9:00 13:00
3 4 9:00 13:00
4 3 9:00 13:00
5 2 9:00 13:00
6 5 9:00 13:00
7 6 9:00 13:00
8 2 14:00
I can solve my problem with a pivot table, and with VBA easily...however, I'm interested in knowing if this can be done with formulas (array formulas using index/match I'm assuming).
Goal: On sheet1 I have one column with products, then the column next to it will have an "Y" in it if the product is to be selected (blank if not). On sheet2 I want to create a list of the products that were selected (having the "Y"). The only thing stumping me is that I do not want spaces between the product list on sheet2...just a nice continuous list. Example:
Sheet1
cup Y
bowl Y
spoon
fork
knife Y
Sheet2
cup
bowl
knife
..not..
cup
bowl
knife
I have a list of street addresses. I want to alphabetize them. I just want to remove all the text (usually just numbers but not always) up to and including the first space only.
View 7 Replies View RelatedI have an address list of 64,000 entries that I want to geo-code (the geo-coding isn't the problem...). A large % of addresses don't have street numbers and this just gives a general position based on the Post/ Zip code which isn't accurate enough - it needs to have an actual street number. I want to extract all of the addresses without a street number so I can cross check them with something else (not an Excel problem). Trouble is some of the street numbers are embedded in a string - might be a multiple NOT problem. Attached a sample file...
View 4 Replies View RelatedI found out a way to get rid of the street number from an address, but I would like the street and apartment number removed. Right now I have various formats:
Dilger Ave #61
Dilger Ave Apt 61
Dilger Ave Lot 61
I would like simply "Dilger".
is it possible to have a cell return all matches from a list and have the list of matches reduce as you type, then be able to select one item from the list? this is a typical feature on internet sites, but can it be done in Excel?
View 3 Replies View RelatedI need a formula/tip that will return the last non-blank item in a list or array. I am updating a worksheet each month with that month's metric and want the end user not to have to scan to the right to see the current value, but see it at the front of the worksheet. For example:
A1 is labeled "Current Value"
B1 : M1 are labeled "JAN" : "DEC"
B2 : G2 have values 45, 54, 32, 65, 14 & 23 respectively
H2 : M2 are blank
I need a formula in A2 that returns the last non-blank item in B2 : M2. In this instance, 23. When I enter a value into H2 (the "JUL" column), I want A2 to reflect that new number. =IF won't do, due to the 7 nest limit. I've seen this solution before but despite arduous searches, I can't find it.
What Formula will return the above request (Preferable as "simple" as possible) ...
View 13 Replies View RelatedTo keep is simple. in a1:a5 are values 5,10,15,20,25. In c1 value is 13.
Need a formula to look at range a1:a5
And return only the next number higher than 13. Of course it's a3 or 15.
I'm looking for a formula to enter within a particular cell which will return the largest number that appears within a range of cells, for example the range H:133 through L:136. If it's any easier, only one number will appear within the range, though it could appear in any cell within that range.
View 3 Replies View RelatedI have a range of cells (D10:D20) with numbers in them. I need cell A10 to look at D10 and return a specific number based on a set of criteria.
The same thing would go for A11:A20 & D11:D20.
If the number in D10 is 1-2 then A10 needs to display 0
If the number in D10 is 3-8 then A10 needs to display 0.1
If the number in D10 is 9-14 then A10 needs to display 0.2
If the number in D10 is 15-20 then A10 needs to display 0.3
Once I have that formula I know that i will just highlight A10 and drag the formula down through A20.
I have a range of some 2,000 plus cells that are various numbers in them only. What I want to be able to apply is a macro that will look at the number in a cell and if the result is between a set range, produce a text, eg.
If the number is between 0 - 999 then insert text [url] this is where you go'.
If the number is between 1000 - 1999 then insert text [url] this is where you go 2'
If the number is between 2000 - 2999 then insert text [url] this is where you go 2'
etc.
I have up to 11 ranges of numbers to insert (up to 10000 - 19999).
So the text is the result of the formula.
In the attached sample work book Col E has text that I want to check if it is also in Col G and return Yes or No into Col F
View 4 Replies View RelatedI need to return all the unique matches from a set of data.
For example, when a product is selected, I need to list all the possible venues it is sold from. I will use this venue list to populate my drop-down listbox, as opposed to having a 100 venues in the list, I just wish to have the applicable ones.
Example of data set I need to lookup in:
prod 1 venue1
prod 2 venue 2
prod 1 venue 3
prod 1 venue 10
prod 2 venue 6
I would like to use a formula if I can (not a macro), to list that prod 1 is only sold in venue 1,3, 10.
It would be great if one could use a vlookup type of formula and it could return a list of each occurence of the look-up'ed cell.....
1) Check to see if a value in column A of worksheet A appears in column A on worksheet B.
2) If it DOES, then display the value from the same row from column B on worksheet B, in column B on worksheet A.
3) If it DOESN'T, display the value "EACH" in column B on worksheet A.
e.g...........
I'm looking for a Formula in order to retrieve all addresses of all matches equal to the search criteria located in cell: E2
The results are hand-typed in col. G
This is a case of a TWO-DIMENSIONAL "Arbitrary Lookup" Arbitrary.
The range A1:C10 was named: TBL and the formula should refer to TBL as it can be dynamic in size.
PS: can anybody tell me why I don't get any E-Mails when an answer is posted?
I have the following formula which, if text is in A1, will lookup from a list of worker's comp codes to locate the code in A2 and return the wording for that
=IF(ISTEXT(A$1),VLOOKUP(A$2,Codes!$B$3:$C$720,2),"")
However, if there is not an exact match to the code in A2, it returns the wording for the next closest code.
Is there a way to make it so that it will only return the wording for the exact match and return "invalid code" if the number in A2 is not found on the list on the "Codes" sheet?
I have two columns, one with the target text (D:D) and one with text I want to compare it too (A:A). If the text in column (D:D) matches the one in (A:A), I want to return the value in (B:B). I attached a sample of the problem i'm dealing with.
View 5 Replies View RelatedI have a Training Matrix with "Main", "Leavers" and "Reports" sheets. (can email it but can't upload it here; it's 534kb and I can't make it smaller)
In the "Reports" sheet I need to fill "Site Procedural Training" - "Number of people trained in period".
The periods are :
25/12/11 - 31/03/12
01/04/12 - 30/06/12
01/07/12 - 29/09/12
30/09/12 - 29/12/12
The source of data will be the "Main" and "Leavers". The data are dates in these sheets; each date = 1
The formula needs to look in to "Main" and "Leavers" and if it finds a date which fits in the required period in "Reports" then return it as 1. If it finds 300 dates then returns 300.
I've been looking through past threads and I can't find what I need to do anywhere. There was one formula that came close: =SUMPRODUCT((A2:A100="Aimbry")*(B2:B100="LW")*(C2: C100)). but this adds up all the matching results.
What I need to do is match the info in columns A and B and return a number in column C. The problem is that there are multiple rows with identical entries and I just want to return one of them. So I was thinking a version of the above that produced a mode or average would give the desired result.
I have two separate workbooks, each with a great deal of information, such as name, ssn, dates, statuses, etc. I would like to compare the SSN column for both workbooks, and when it finds a match (which there would be many) to copy the MOS cell from the same row to the other workbook. Here is my breakdown with names:
Workbook 1: Macros.xls
Workbook 2: MASS 162.xls
The SSN column is column C in both workbooks
When there is a match found between the SSN column in Macros.xls and the SSN column in MASS 162.xls, I need to copy the MOS cell (column E) from the MACROS.xls workbook to the MASS 162.xls workbook into the same row, but in column M, which is currently empty.
I'm writing a macro that will import data from one workbook to another, based on yesterdays date. I have the import functionality working, and I've been playing all afternoon, but I can't find a way to find yesterdays date in a range and use that row number as the row offset value in this line:
Rather than having a set row offset value (in this case, 14) I would like to use the find function to lookup yesterdays date in range "B50:B80" in the worksheet I've designated as "sh1" and return the row number of the cell that has yesterdays date and use this value as the row offset value, replacing the hard coded 14 that is in there currently. The date values in the range are formatted as per Date Format.jpg.
I want to replace all defined range names in the sheet that start with "Street" to "Road"
For example I have 50 defined names in the sheet as such "Street-01", "Street-02"... all through "Street-50"
I want to change them all in vba to Road-01", "Road-02" etc.
Lets see if I can put this into words.
I am trying to find matches of a specific cell in various columns. Example:
Header 1 -------Header 2----------Header 3
-ABC123-----------abc123--------------abd123
-abd123-----------hjk321---------------hdn234
-Abc123-----------dsd123--------------sds332
If I searched for the value "abc123" I want it to return Headers 1 and 2 in a seperate column. It would not matter if the same value is in one column multiple times
So the results would show me the Column Heading for anything that reads: "abc123", "ABC123", "AbC123", "aBC123"
Is this possible?
I have a list with 8 columns. In the majority of instances, Columns A & B will have duplicate information. I need to be able to search columns A & B & return the information from them PLUS all info contained on the same row's from columns C/D/E/F/G & H. EG:...
My column headings are as follows...
Type Region Contact Phone Email ADD1 ADD2 ADD3
In column A (type) would be the type of contact eg:business/personal/family etc.
So... If looking for family I'd need excel to show me the region, contact, phone, email, add1, add2 & add3 for each family record. Hope this makes sense!
There are over 1000 records i need excel to search through & return matches.
I'm an intermediate excel user at best so finding it complicated. Tried vlookup but that stops when it finds a match & anything else seems over my head.
I've got two worksheets ("June" & "July"). On both worksheets, column A is comprised of ID numbers and column B contains dollar amounts. I need to compare the ID numbers in Column A on each worksheet, and if they match I want to copy the ID number and the amount to a third worksheet ("Results").
View 3 Replies View RelatedI am using a userform to pull some data from a form that many different workers fill out. I have a button on the userform that automatically saves certain cell values in the form to a different workbook when they hit this button (they hit it every time after they are done filling it out)....The problem is that if they need to go back and make changes to the form they originally created, the workbook that has all the data will now have two entries for the same form number (when they hit the button it also saves the workbook as NCR####) but I only want the most recent one..
So what I need to make it so that if two numbers in column C (C2 and on) of workbook "NCR_Data.xls" match that this macro deletes the one furthest from the top (my code places newest entries at the top, in row 2).