I would like to move the data in one column up by 1/2 a row without moving the other columns/rows in the spreadsheet
Here is an example I made quickly in Photoshop - the above image is what I currently have in Excel, and the lower image is what I would like to achieve, with the column shift that I would like circled in red
(the empty space under the column heading is just an artifact from the edit, it doesn't have to be there)
Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?
View 9 Replies View RelatedMy check register was exported to a excel spread sheet where the deposits and debits are all in one column E. The debits are entered as a negative number. I want to create two separate debit and deposit columns with the appropriate data entered. What the best way of moving the data accordingly?
View 3 Replies View RelatedI've been trying to figure out how to use a formula that would enable me to copy/copy & move a range of cells right one column if a certain criteria is met.
Basically, if a criteria is met, I want to 'copy' everything from a row to another row, but offset it by one column (so that what was in, let's say, a1 would be in b2).
I've been tinkering with index(), if() and offset() in various combinations but think I must be missing something.
I have come across a format issue I need to deal with it at work.
I have a list of data like this:
A
1234567
8956423
4561237
7531596
8524561
In Column A, I have about 2,000 lines of information. What we want to do at work is create this information to be held in one cell at the top of the excel and in numerical order.
Like this:
A
1234567, 4561237, 7531596, 8524561, 8956423.
I have the following code that will go down through column "L", look for the value "ATS", and if found will move it to the right 1 cell. this works find,
My need is to also move the 2 cells directly below the cell containing "ATS", then clear the contents of the "Original" 3 cells before going to find the next instance of "ATS".
Sub Move_Values()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("L4", Range("L5000").End(xlUp))
For Each cell In myrange
If InStr(cell.Value, "ATS") > 0 Then
cell.Offset(0, 1).Value = cell.Value
cell.ClearContents
End If
Next cell
End Sub
I have 2 col A & F. F col associate with date values & Col A has some color cells.I want to move down those color cells to a selected non-color cell row when run a macro.
I have code which perform to move color cells down to selected cell but problem is, if i have A4 & A6 color cells and i selected F2 cell & run macro then color cell A4 & A6 move down to cell A2 but cell A3 move to place A6. The sequence is
A1A2A4A6A5A3A7A8 & so on but i want cell A3 just push down the order & sequence will be
A1A2A4A6A3A5A7A8 & so on My code is as
Code:
Public Sub Move_colored_cells_rows()
' Instead of moving the entire row , 10 columns will be moved
Const NUMBER_OF_COLUMNS = 10
[Code]....
I have a cell comment on a series of columns and want to show only one column at a
time. For this reason I hide the ones not used, but the cellcomment doesnt move and
is still at the original place. How I move the comment when the original colums between are hidden ?
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e.
User Group:
Item
Lodgement Ref
Batch Totals:
User Group:
Item
Lodgement Ref
Lodgement Ref
Lodgement Ref
Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
I have attached the sample file where I have noted what I want as a comment. I need to check for the value " Function Name: RF Pick" if this is there then the code should move 2 rows down check whether that row has the value " Each" if its there just move one row down and move the cells as I need in the output.
View 7 Replies View RelatedAttached is a document, column C & F highlighted in green are areas that users will input data. I need to create a button (top left of spreadsheet) that when pressed moves both the data from column C & F up into the box above. The top set of dates would be deleted and the dates from Trip 2 would move up into the Trip 1 position, Dates from Trip 3 would move up into Trip 2 position and so on.
View 2 Replies View RelatedI'm trying to do is loop through a range of cells, and if the cell meets a condition I want to move it and 2 cells to the right of it left by one cell.
Sub MoveRangeOfCellsBasedOnCellCriteria()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("H2", Range("H65536").End(xlUp))
For Each cell In myrange
If IsNumeric(Left(cell.Value, 1)) _
Or Left(cell.Value, 5) = "UNIT " _
Or Left(cell.Value, 4) = "THE " _
Or Left(cell.Value, 5) = "FLAT " Then
Else
cell.Range("A1:C1").Select
Selection.Cut
cell.Offset(0, -1).Range("A1").Select
ActiveSheet.Paste
cell.Offset(1, 1).Range("A1").Select
End If
Next cell
End Sub
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
I have a huge financial spreadsheet with linked formulas over multiple sheets, and several of these formulas have absolute references. I would like to be able to remove the anchoring so that I can insert rows without disrupting them. Since there are literally thousands of cells I would need to unanchor manually.
View 2 Replies View Relatedis it possible to delete/remove all non use cells
for example if i only want the cells A1 THROUGH TO O31
all the rest removed??
I'm attempting to highlight or remove cells if the 3 cells contained in column A, B, C match three cells in D, E, F.
SKU1
Image1.jpg
Image 1
SKU1
[Code].....
So for the cells contained in A, B, C row 2 to get highlighted/removed, they have to be a perfect match to the corresponding cells in D, E, F row 1.
I have a column of contacts. Each contact has data spread out over many rows, most of which are blank. I would like all of the data spread out through the rows to be in one cell, delineated by commas (so I can import into another program).
Concatenating the cells works except that I end up with 20 commas for two strings of info.
Just so you understand I may have this:
Mary red blue yellow purple
Rob blue purple
Trey yellow
and I want it to look like this
Mary red, blue, yellow, purple
Rob blue, purple
Trey yellow
How should I go about this?
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies View RelatedI have a large excel file with the top seven rows such as you see in the attached file. In row five there is a bunch of info before the month and the year. What I want to do is get rid of that info besides the month and year. I than want to sort each column by the month and year so that all the columns are in sequential order.
demo.xlsx
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I am trying to move the data in a row from cell D thru I (eye) to cell H thru M.
Simply move it all over a few cells. Well not so simply.
The line in RED fails.
I have rows of data starting in row 4.
I have row Headers taking up columns A:G.
My data, which is downloaded, can be anywhere between H4 and IV900.
I need a macro that will go to G4
Then do the equivalent of arrow right to the first cell containing data
Select that cell and all cells to the right of it
Copy the selected range
Cut and Paste it back to H4
Move to G5 and repeat all the way down the worksheet so that I end up with al of the data starting in column H rather than spread all over the worksheet.
I have some code below that moves pasted data to the left and then pastes it to another page. Trouble is: 1) When the data is moved to the left I would like the spaces in the text to remain e.g.
1 2 2
would become
1 2 2
instead of
122
(as is the case currently).
Range("A3:IK34").Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.Delete Shift:=xlToLeft
Range("A3:IK34").Select
Range("A34").Activate
Application.CutCopyMode = False
Selection.Copy .................
I have an Excel sheet with several columns of data, each containing the link to a website. To the far right of this data, I have a column called "Official Source" in which I'd like to copy over any website links containing the phrase "sec.gov" (if there are any, if not than leave the cell blank).
For example, if I have the following data in my sheet:
Column A Column B Column C
[URL].... [URL].... sec.gov/Ar
Than I would want the last source to move to column D -
Column A Column B Column C Column D
[URL].... [URL].... sec.gov/Ar
how to do this?
The attached workbook has formulas that will return data from category sections that will grow and contract over time.
While it tells me that the total price of the "Active Overdue Customers to be Scheduled" section is 4119...I would like to determine how many in that section also have "Dunn" under the "Company" column.
Every section does not have the "Company" column, and "Company" is located in different columns in different sections.
I have whats going to be a very large "Input" worksheet that has several headings of columns. One of these columns is "category" as in parts of a vehicle, i.e. steering, wheels, rod-ends and so on. Now what I would like to do, is once I type a new row of information in, to have the filter go through and copy said category row into another worksheet where I can have all of them separated on there own.
Here is a picture of my current spreadsheet. So basically I want to be able once I save the file, that it goes through and where it detects Rear-End in "B18" I would like it to select row 18, copy all of its cells and move them into the worksheet Rear-End
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
I have to move formulas from cells without the changes ?
Then i use copy-past it changed the rows and collums numbers, but i need to keep absolutly the same formulas
way to find all the cells in range A1:A200 that partly contain the string "FindThisWord", and then cut & paste each of those cells 1 row above and 2 columns to the right?
View 8 Replies View RelatedIn my current spreadsheet I use Offset to change the values of various cells. The problem is that if I make any changes to the columns it throws the whole offset thing off. So, instead of using offset to paste all the data is there an alternative that would work better?
I was thinking maybe I could name a column as a range and then have the cell in that row equal a value.
What solutions are there?
ActiveCell = TextBox1.Value
ActiveCell.Offset(0, 1) = TextBox2.Value
ActiveCell.Offset(0, 2) = ComboBox9.Value
ActiveCell.Offset(0, 3) = ComboBox2.Value
ActiveCell.Offset(0, 4) = ComboBox3.Value
ActiveCell.Offset(0, 5) = ComboBox11.Value
ActiveCell.Offset(0, 12) = ComboBox1.Value
ActiveCell.Offset(0, 13) = TextBox6.Value / 100
ActiveCell.Offset(0, 16) = TextBox4.Value
ActiveCell.Offset(0, 17) = TextBox5.Value
ActiveCell.Offset(0, 18) = CostBasis
ActiveCell.Offset(0, 19) = NumberOfShares
ActiveCell.Offset(0, 59) = DividendFreq