Remove Duplicated Buttons When Copying Worksheets?
Jul 19, 2013
I have built a template worksheet from which I have developed a macro to copy and rename a new worksheet for each month. When the macro executes, it duplicates the macro buttons on the sheet. That is it copies the original macro buttons over (good) then adds "new" buttons in the same locations. The original macro button have been labelled with their function (eg Copy and Paste).The new buttons continue to go up in sequential order e.g. Button 71, Button 72... How do I remove these additional "new" buttons without deleting all of the buttons on the sheet?
View 1 Replies
ADVERTISEMENT
Jul 28, 2014
Remove duplicate but add values.xlsx
I have about 800 records and the the unique identifier are the names. Some owners are repeated several times and they have different values for the EDU column in my project. I need to remove any duplicated owners but I need to add up the values of each record that had value so I can get a combined value for one owner instead of a repeated owner with smaller values. How would I go by doing that? A formula or is there a tool in excel? I am lost on this one. I uploaded a sample file so you can see what I trying to do.
BTW i found if the values are the same for the EDU then I can not add them since it is also duplicated. I can only add up the unique values for the EDU.
View 14 Replies
View Related
Jul 22, 2014
I need to know how can i remove unique numbers from excel and leave only duplicated?
View 7 Replies
View Related
Dec 17, 2006
I am trying to come up with some code to loop through all worksheets in the workbook and remve assigned macros from any buttons on each sheet
My code below. I type btn. and reviewed the items offered by intellisense, but nothing seemed fitting.
Sub RemoveAssignedMacro()
Dim wb As Workbook
Dim btn As Shape
Dim sht As Worksheet
Set wb = ThisWorkbook
For Each sht In wb.Worksheets
For Each btn In sht.Shapes
btn.
Next btn
Next sht
End Sub
View 8 Replies
View Related
Nov 5, 2013
I have a command button set up to gather information, then create a new sheet, and paste a copied button from another location to the new sheet. The command button that shows up on the new sheet is offset and not centered in the cell. It is centered in the cell where it comes from and the cells are the same size.
I noticed that if I copy a command button and simply paste it to a new sheet, it is offset just like this. I need it to not do this. If I have to make it write in a new command button and assign a macro to it, that is fine. I went with the copy/paste option to save time.
[Code] .....
Now, before it becomes an issue, this is only a part of the full code, but it is running in it's own conditional loop. The other part works fine. And I tried changing the alignment in the cell to see if that was the issue. It was not.
Copied command buttons are offset in the cells they are pasted to.
View 1 Replies
View Related
Jun 11, 2008
I have a little boo-boo I need to fix. I have a customer that has about 100 workbooks. I needed to add some functions to them so I made up a new sheet of forms and buttons as well as a series of new macros to bring into these workbooks. I knew I couldn't import the macros, so I added the module containing those by hand to all workbooks. I then imported a master copy of the new sheet from a master file i use to hold my working macros. The problem is the buttons on the new sheeets in each workbook now references the master workbook for the macro name, even though each workbook has the same macro of the same name in itself.
My question is, can I make a macro that will edit all the buttons on a specific named sheet (maintenance is the sheet name) in a workbook and take out the external reference.
For example, instead of the assigned macro pointing to c:master.xls!macro1 i just want it to call macro1. And yes, I can go into them and do it by hand. Do I want to manually edit 100 workbooks for a dozen buttons each? No. I want to automate it if I can. If anyone can help I would greatly appreciate it. It would save me a bunch of time.
View 9 Replies
View Related
Jan 27, 2014
I have a code that copies a sheet into a new workbook. The copied sheet is for information only. On the original sheet I have various macro's assigned to buttons made from using Insert Shape command. I assume if I can find away to remove the buttons then the functionality of the macro's would be lost which is what I want?
View 9 Replies
View Related
Apr 2, 2008
If I have two optionbuttons (controls) on a sheet, may I define the same linkedcell for these two optionbuttons, or only for one of them ? My question arise from the fact that I meet sometimes an error message ("The cell or chart you are trying to chage is protected...") although the linkedcell is unlocked on the protected sheet (which is not the sheet where the two optionbuttons are placed).
View 2 Replies
View Related
Dec 3, 2011
I have a button (A) that will unhide worksheet A. I would like to add another button (B) that will hide(very hidden) worksheet A (if allready open) then open worksheet B, vice versa when click button A.
Code:
Sub ShowSheets()
With Worksheets("A")
.Visible = xlSheetVisible
.Activate
.Range("A1").Select
End With
End Sub
View 5 Replies
View Related
Nov 5, 2009
Why code will not hide command buttons or worksheets based on a given password. I have attached the code so.
Private Sub Workbook_Open()
Dim strUser As String, strPassword As String
strUser = InputBox("Enter User Name")
strPassword = InputBox("Enter Password")
Select Case strUser
Case "O"
If strUserPassord = "O4" Then
ActiveWorkbook.Sheets("Main").Select
O.Enabled = True
GOODBYE.Enabled = True
S.Enabled = False
R.Enabled = False
A1.Enabled = False
A3.Enabled = False
A4.Enabled = False
Sheets("Set4").Visible = True
Sheets("Set5").Visible = False
Sheets("Set61").Visible = False
Sheets("Set63").Visible = False................
View 9 Replies
View Related
Sep 10, 2004
I have a setup at the moment where I have a spreadsheet using a bunch of macros that are coded in a module attached to another spreadsheet. In both spreadsheets the macros are tied to Excel buttons placed within worksheets. When I copy the spreadsheets each month to new directories - they're used for some monthly reporting - I see the following behavior:
1/ The spreadsheet that contains the module with the code for the macros correctly updates the location of the macros and works OK.
2/ If I open the other spreadsheet and save it the macros appear in the tools/macro dialog as having changed location OK. However, if I try to use the macros by pressing a button the macros invoked are in the old location. If I check the assignment of the macros in this spreadsheet by right-clicking on a button, indeed the macros invoked are in the old location. This means that I have to go through and manually update for each button the macro invoked.
View 2 Replies
View Related
May 24, 2006
I am trying to create a program to automate the gauging figures on oil barges, currently everything is done by hand and takes approximately 20 minutes to complete. I have the charts entered for the tanks already and have the code set so that when you click on a tank "gauge" it will enter the "volume" which corresponds to that gauge on a totals sheet. Here is where my problem is coming in
The barges are gauged at four points
"before loading"
"after loading"
"before discharge"
"after discharge"
I want to set a worksheet as the default page with four command buttons that let the user select which operation he wants to perform. before load figures. after load figures and depending on which operation they select have it enter the volumes in the appropriate cells on the totals sheet. So if someone selects "loadopen" command button I want the following code to run on my worksheets............................
View 2 Replies
View Related
Aug 27, 2013
I have job names that look like this sample:
83369 CMT 2x Harpers cone links
I have a formula that copies just the first five numbers to a cell: =LEFT(B3,5)+0
Result is 83369
Now I need to copy everything BUT the first five numbers to another cell so the result is: CMT 2x Harpers cone links. How do I do that?
View 3 Replies
View Related
May 14, 2012
I have 2 nearly identical workbooks and I need to update historical data from the old workbook into the newer one.
My current Coding Snippets that I want to use look like the following:
Code:
Sub UpdateWorkbook()
Dim ws As Worksheet
Dim r1 As String
Dim r2 As String
Dim r3 As String
Dim r4 As String
Dim r5 As String
Dim r6 As String
[code]....
Now, this code isn't working I suspect because the Copy and PasteSpecial Functions don't work the way I wish to.
View 4 Replies
View Related
May 11, 2007
I have 12 worksheets, 1 for each month. The first worksheet is filled out with all the coreect formulas and is in the correct layout. How do I copy the first worksheet to the rest of the worsheets exactly so that all the formulas, cell arrangement and the page setup is correct?
I know how to highlight, copy and paste but this does not seem to transfer everything.
View 3 Replies
View Related
Mar 20, 2013
I have 2 worksheets. The first worksheet contaions raw data. On the second worksheet I am pasting certain data from the first worksheet. Everything copies except the data in column BI. This column has blanks as well as numbers. I need the column copied as is. The range should equal the number of entries in column A. Why am I getting the error, and Is there an easier way than what I'm using?
Sheets("Raw Data").Select
Range(Range("A4"), Range("A4").End(xlDown)).Select
Selection.Copy
[Code].....
View 5 Replies
View Related
Aug 25, 2009
I have a master spread sheet that contains many products which are then grouped into system. Typically, three or four products make up a system but it can be as few as 1 or as many as 6.
The master spread sheet contains all the products. But I would like to be able to create new worksheets where the new worksheet would only contain the tabs of the system.
All the tabs are named as follows: Product #, then system name: Here are examples: (all of the product names will contain the same amount of characters, but the system names will vary in the amount of characters necessary).
B23456 x1 Batter
B45930 x8 Batter
B39080 x5 Batter
B32556 x4 Breader
B39083 x2 Breader
B23049 x4 Predust
G34509 x5 Marinade
G34529 x3 Marinade
G34590 x3 Marinade
Thus, I would want the first 3 in a Worksheet, then Next two in a worksheet, and so on. A bonus would be if the worksheets were all saved with the System name, i.e. batter, breader, predust.
View 9 Replies
View Related
Mar 8, 2007
I have a project that has a variable number of worksheets, dependant on the number of models in the job. These worksheets usually only use a single page, but may use two pages if the model is large (not often the case though). I have a "Template1" worksheet that is copied as a whole, to equal the number of models.
To minimize the file size that is generated when copying out the "Template1" worksheet, I have put the template of the second page on a separate worksheet "Template2". Now the initial copy is only of a single page, and the second page is only copied into the new worksheet if needed.
Sub AddPg2()
Dim CrntPg As String
CrntPg = ThisWorkbook.ActiveSheet. Name
Application. ScreenUpdating = False
ThisWorkbook.Worksheets("Template2").Visible = True
Worksheets("Template2").Activate
ActiveSheet.Range("A47:T96").Select
Selection.Copy
Worksheets(CrntPg).Activate
ActiveSheet.Range("A47").Select
ActiveSheet.Paste
ActiveSheet.Range("D58").Select
ThisWorkbook.Worksheets("Template2").Visible = False
Application.ScreenUpdating = True
End Sub
If I do this process manually, I toggle DesignMode "on", and it works, but I if I record the process, toggling DesignMode does not show in the code. how to include the comboboxes and checkboxes in the copy/paste process.
View 8 Replies
View Related
Dec 6, 2007
I would to ask how do I match the values in Sheet1 and Sheet2. As you can see in the attached example, I need to get first in Sheet3 if there is a certain individual in Sheet2 from Sheet1. After that, I need now to fill out the remaining columns in Sheet3 to match values for the corresponding names.
View 3 Replies
View Related
Oct 19, 2009
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies
View Related
Sep 25, 2008
I have a report that I need to divide data onto different sheets based on a value in a particular column, and am working with 3 sheets.
Sheet1 is the entire database of information
Sheet2 is the entire row of data from Sheet1 where column3 value on Sheet1 is "SC"
Sheet3 is the entire row of data from Sheet1 where column3 value on Sheet1 is "TC"
Sheet1 has 15 columns, and the number of rows vary (up to 2000). The loop would end if there are consecutive blank fields in column 1 of any of the rows, as there is not always data in column 3.
View 3 Replies
View Related
Jul 1, 2009
What I'd like to do is to have the block of rows starting from "Agent:" and ending with "Total" copied into a separate worksheet and then have the worksheet named using the agent's name. I have highlighted the data in yellow in the attached reference file. I would like to have this done for all 58 agents. I could copy and paste manually but that wouldn't be the smartest way to go about this. I figure I probably need a looping structure for this but I am not yet proficient enough to figure this out quickly. I am supposed to have this done today.
Edit: The last part of this would be to have blocks of rows from the "sections" worksheet which use identical agent names also pasted below the data from the "questions" worksheet. I have attached the workbook I am working on now cutting and pasting manually.
View 4 Replies
View Related
Feb 2, 2012
I wanted to create a target workbook that is a subset of the source workbook
1) I want to specify a list of worksheets in the source workbook:
For Each WSCurrent In Sheets(Array("SheetA", "SheetB", "SheetC"))
Next WSCurrent
2) I want to them copy these sheets into another workbook (don't know how to code this)
3) I then want to hardcode all these sheets (I don't know the most efficient way to do this)
4) Lastly, I want to eliminate certain columns (can be fed through a hardcoded list of Columns to delete e.g. X, W, Z)
View 5 Replies
View Related
Dec 12, 2012
I want to be able to copy a formula to multiple worksheets that are dependent on previous worksheet.
For example:
WorkSheet 2(named week 2) the forumula in cell F7 is =VLOOKUP(E7,'Week 1'!E7:F279,2,0)
I want cell F7 in sheet 3 to be =VLOOKUP(E7,'Week 2'!E7:F279,2,0)
and so on for 53 weeks. Is there a way to do this.
View 1 Replies
View Related
Apr 3, 2008
I have 100 files (Book1.xls through Book100.xls)
All files reside in L:MISInernal MIS
I need to open each workbook, copy Sheet1, paste to next available Sheet# in Combined.xls, close the workbook and move to the next workbook.
I have the code for copying a specific sheet from one workbook to a new workbook. But I do not have the code which would perform the above mentioned task for me and I don't have any idea for how am I going to do this without your help
I have used the Search option to find out if this question had already been answered but I could not find a solution for this specific request
View 9 Replies
View Related
Aug 13, 2008
I am trying to copy data from one worksheet to another.The problem is that it doesnt copy zeros across eg. for value 00125, it will copy only 125.
Can anybody tell me how to pick zeros as well.
Also at the moment i have added code to match just one column. How can i attach another criteria to match for 2 column value?
Set xlRng = xlSheet.Range("A13:A44")
Set rngFound = xlRng.Cells.Find(what:=ActiveSheet.Cells(rwNumber, 1).Value, LookIn:=xlValues, lookat:=xlWhole)
View 9 Replies
View Related
Sep 2, 2008
My macro does some calculations for a worksheet. I need the macro to loop through all the worksheets regardless of how many worksheets there are. My first sheet is a summary page with the names of the subsequent sheets that the macro needs to do calculation on. I need the macro to recognize the worksheet names in the summary page and run for each worksheet name. For instance the next time I run the macro I may have fewer sheets of more sheet names in the column. It sounds almost like an Indirect function problem.
View 9 Replies
View Related
May 31, 2009
I have a file with four worksheets. The first is the master sheet. The other three sheets we can call "SheetB" "SheetC" and "SheetD." The actual names are quite long. Column T of the master sheet (except for the header row) contains dates formatted as text in YYYYMM format. I need a macro that will copy the rows to the other three sheets based on these criteria:
SheetB - dates April 2010 or before
SheetC - dates May 2010 to April 2011
SheetD - dates May 2011 and beyond
View 9 Replies
View Related
Apr 22, 2006
i have 2 worksheets. Worksheet A has 100 rows on it with information in the first column. However, there are many blank rows e.g
Column A
1
2 matt
3
4 simon
5 paul
6
7
8 mike
9
10
11
12 john
what i need to do is transfer this to worksheet B without copying accross the blank cells, Now the main problem is i want the cells to be linked so i need a formula that finds the next cell with data in it to go in the next cell down. So worksheet B will look like this:-
Column A
1 Matt
2 Simon
3 Paul
4 Mike
5 John
View 3 Replies
View Related
Feb 27, 2007
In my attached example you can see I have Sheet "Computer" & Sheet "RHN" both have a number of columns, but all I want is to compare Column A of "Computer" with Column A of "RHN" and copy all entires found in A "Computer" and not found in A "RHN" to a new sheet!
View 4 Replies
View Related
