I want to be able to copy a formula to multiple worksheets that are dependent on previous worksheet.
For example:
WorkSheet 2(named week 2) the forumula in cell F7 is =VLOOKUP(E7,'Week 1'!E7:F279,2,0)
I want cell F7 in sheet 3 to be =VLOOKUP(E7,'Week 2'!E7:F279,2,0)
and so on for 53 weeks. Is there a way to do this.
I have 2 nearly identical workbooks and I need to update historical data from the old workbook into the newer one.
My current Coding Snippets that I want to use look like the following:
Code:
Sub UpdateWorkbook()
Dim ws As Worksheet
Dim r1 As String
Dim r2 As String
Dim r3 As String
Dim r4 As String
Dim r5 As String
Dim r6 As String
[code]....
Now, this code isn't working I suspect because the Copy and PasteSpecial Functions don't work the way I wish to.
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
I am trying to optimize my code below. It works but it is soo slow, it seems to slow down on the array copy and paste special areas. I believe this is because its doing a cell to cell paste method. These sheets have data as well as graphs that i want to retain on the new sheet, but i could select ranges for each each if that would speed up this procedure.
Code:
Sub CreateDataSheet()
Dim ws As Worksheet
Dim sDataOutputName As String
With Application
.Cursor = xlWait
.StatusBar = "Saving DataSheet..."
.ScreenUpdating = False
[Code]....
I'm writing code which will copy multiple sheets of information in a workbook (from a report) and trying to paste it onto one sheet in another document where I can further manipulate the data. Here's my code, I've made some mistakes, and I've just been banging my head against the screen try to fix it. I'm erroring at ActiveCell. Offset(1, 0).Range("A1").Select. I'm trying to paste it all in one sheet at the next blank cell in the sheet and then close the document after it's all been pasted.
Sub OpenDataSheet()
'Opens CSS Report
Workbooks.Open Filename:="C:Documents and SettingseichornjDesktopTest and Destroy est and destroy CSS.xls"
'Delete first two sheets of CSS report
Application.DisplayAlerts = False
Worksheets( Array(1, 2)).Delete
Dim mySheet As Worksheet
For Each mySheet In Worksheets
mySheet.Select
'Delete unneeded rows of CSS report
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
View 3 Replies View RelatedI have a workbook that tracks pollutant emissions. The workbook could end up having up to 180 worksheets, one for each pollutant and the emission total. I have VBA to create a new sheet for each pollutant (attached) using a hidden template sheet.
The summary sheet in position 1 needs to list each pollutant worksheet on a new row, and the same 4 cells from each worksheet (id, name, value, value). I have been typing out the cell references in the summary sheet, and it gets boring [=Sheet!Cell id], [=Sheet!Cell name], etc.
Is there a way for me to copy those cells to the summary sheet when the new sheet is created?
I want to link him on all the spreadsheets, but his cell location is always changing because new doctors are being added every year. Is there anyway to link the specialty column with his name so that whenever his name comes up on the other worksheets, the specialty will be automatically filled in with the correct specialty value? I want to be able to do that with all the doctors.
Also, I want to highlight certain doctors in all the seperate sheets, I have Excel 2007 on my home PC, but on my work PC I have Excel 2002. To do this in Excel 07 I would just conditionally format the workbook to highlight certain names, but I cant seem to find a way to do this in Excel 02.
(Code at the bottom of this message)
I have a file with a roughly 20 workbooks. I need to split the data in each workbook into two sheets, rename each sheet, then export the data to template with multiple sheets. After splitting the data into the appropriate sheets in the original workbook, Sheet1 in has only 1 row (plus header) and needs to be transferred to "Project Entry" in the template; Sheet2 can have any number of rows (less than 100) and needs to be transferred to "Activity Entry" in the template. I need to save the template based on the value of cell A1 on "Project Entry" sheet of the template. The organization of the columns in the original workbooks is different than that of the template, so this is not a straight copy and paste operation. The cell formatting in the template must be retained.
I have half of this under wraps. I've cobbled together some code that splits the original data where I need it split, copies it to new sheets and saves the files. I now need to figure out out to get it out of this saved file and into the template.
The crosswalk of values between the original data (Sheet1) and the template(Project Entry) needs to look like the below. So, variable 1 exists in column B of the original and needs to populate column B of the template, and column Q in the original needs to populate column G in the template. The variables and column relationships are different for Sheet2/Activity Entry.
SPREADSHEET COLUMN
Variable
Original
Template
[Code]....
Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.
im working on a excel 2010
This is what i got for the moment..
Sub LoopThroughDirectory()
Dim MyFile As String[code].....
I have a master page with A1 containing the names of staff members and then 5 columns indicating preference1 .... preference5. Each preference column will have one 4 digit site code i.e. 8156 entered. I will have 64 worksheets matching all potential 4 digit site codes that could be entered in the preferences columns.
SAMPLE - one staff member entering 5 site codes (A1 to A6)
Billy Bloggs - 8124 - 8456 - 8456 - 8123 - 8882
What I am looking for is a way to autocopy the persons name to the appropriate worksheet and into the correct preference column as I enter the 4 digit code against the staff members name on the master sheet.
I have a workbook with three sheets.
Sheet 1 is an original 'in progress' work.
Sheet 2 is a copy of sheet 1 taken on a particular date.
Sheet 3 is information extracted from Sheet 1.
On sheet 3 what I need to do is change the font colour of a cell to red if the information it contains in relation to Sheet 2 is different i.e Sheet 1 cell and Sheet 2 cell are different
For example
Sheet 1 cell value = Deb
Sheet 3 cell value = Deb
Copy of sheet 1 taken to create sheet 2 on a certain date
Sheet 1 cell value changes to = Bed
Need Sheet 3 cell to change to = Bed as it is different from sheet 2
I did try conditional formatting but it will not work with info. from another worksheet that I can see. Maybe someone out there has another solution.
I have a custom data entry form which is working fine. The form completes customer data for reviewing at a later date. I have now been asked to change it so it will seperate the data in to customer's who require some documents sent out and some that dont.
Is it possible to have a combobox on the form and if the options on the combobox are Yes and No (original), when either option is selected the data will complete on to a seperate sheet for cases with documents required or documents not required?
I have a worksheet with 30 sets of 3 columns, each column has 20 to 30 rows in use for the same realitive data. I want to get the sum for each 1x across 30 sets of the columns. I am checking vs if it says Projected or Actual. My Visual Basic macro ability is very limited at best. I have a totals row for each row of data so i can see totals for 1x over 30 days, 1.5x over 30 weeks, and 2x over 30 weeks.
Here is the basic idea of what i am dealing with:
A B C
Projected (merged across A, B, and C)
1x 1.5x 2x
8 4 1.5
7 0 0
8 2 0
8 4 5
Again, this represents one day, and I am trying to track at least 30 days across 90 columns. Also there are anywhere from 20 to 30 people being tracked at any one time so this continues to many more rows depending on the job.
Please help, it would be greatly appreciated.
I am needing to create 2 drop downs that are dependent on 1 drop down. I have named lists that are on another worksheet. I've gotten so far as getting the 1st 2 drop down lists work but my third drop down I just can't figure out what the formula needs to be. HELP!! I've been working on this for a week now and I'm losing my mind. I've checked the contextures website and it does NOT answer this question.
View 9 Replies View RelatedI have 12 worksheets, 1 for each month. The first worksheet is filled out with all the coreect formulas and is in the correct layout. How do I copy the first worksheet to the rest of the worsheets exactly so that all the formulas, cell arrangement and the page setup is correct?
I know how to highlight, copy and paste but this does not seem to transfer everything.
I am attempting to create a form in excel with dynamic data validation fields. What has me stumped is that I want to create multiple complex dependencies (for instance, if you select something from a drop-down list in the first field, that then gives you a specific range in the second field. Then based on what you placed in the second field it gives you a specific range in the third field.). What I can't seem to work out is the formula for making this work.
Is this impossible? Also sometimes the third field my be blank.
Here is an example of what I am trying to accomplish
Assets 2.PNG
I have been asked to edit a worksheet for a client, they want me to create a dependent drop list using existing data from three columns.
I have created a dynamic named range and used and index to create the drop down list, which seems to work correctly. I run into a problem with I try to add the list to more than one column, as it obviously pulls in values from the Helper sheet I have used.
When the user tries to select values in row one after making a selection in row two, the values available for selection are incorrect.
Is there any way to have a three column dependent drop list that can be used in more than one row?
I have uploaded the file here: ownCloud
The information on the tab named 'Cabling Ducts' is used in an index on the 'Helper' sheet to remove duplicate values. The drop down list columns appear in 'CS 1' under the headings 'Cable Type', 'Size (mm)' and 'Cores'. Helper sheet is self explanatory.
There are other dependent drop-down list posts on this forum, but none of them are talking about working with multiple worksheets. I have three worksheets, one called "Main", one called "Universities", one called "Schools".
One the "Main" worksheet, I have two Combo Boxes (the one from the "Form" toolbar). I would like to first pick a university from the combo box and then based on the selection, the second combo box would give me just the schools in that specific univeristy. My guess on how to link the two drop-down list is by the ID column. If I select "University of Washington" which has an ID of "WAS" it would narrow down the second list to ID with "WAS" in it (Which would be "WAS1", "WAS2, etc). The reason I am using Combo Box is because of the "Link Cell" property which give me an output of the number of the selection into a cell. I will use that to get the corresponding ID. I have attached an example to this post.
I've looked at the data validation tips and understand how to make a second dropdown dependent on the 1st, but how about a 3rd dependent on the prior 2 selections and so on.
I would like to have dropdowns based on a dataset of 4 columns (Location, Department, WorkGroup, Employee) that frequently gets updated. I would like to have the user select a location then a department then workgroup and employee. I would then fill in a worksheet with other pertinent information. I can get the 1st two dropdowns to work, but haven't found the key to being able to continue to drill down based on the 1st two options.
I have 2 worksheets. The first worksheet contaions raw data. On the second worksheet I am pasting certain data from the first worksheet. Everything copies except the data in column BI. This column has blanks as well as numbers. I need the column copied as is. The range should equal the number of entries in column A. Why am I getting the error, and Is there an easier way than what I'm using?
Sheets("Raw Data").Select
Range(Range("A4"), Range("A4").End(xlDown)).Select
Selection.Copy
[Code].....
I have a master spread sheet that contains many products which are then grouped into system. Typically, three or four products make up a system but it can be as few as 1 or as many as 6.
The master spread sheet contains all the products. But I would like to be able to create new worksheets where the new worksheet would only contain the tabs of the system.
All the tabs are named as follows: Product #, then system name: Here are examples: (all of the product names will contain the same amount of characters, but the system names will vary in the amount of characters necessary).
B23456 x1 Batter
B45930 x8 Batter
B39080 x5 Batter
B32556 x4 Breader
B39083 x2 Breader
B23049 x4 Predust
G34509 x5 Marinade
G34529 x3 Marinade
G34590 x3 Marinade
Thus, I would want the first 3 in a Worksheet, then Next two in a worksheet, and so on. A bonus would be if the worksheets were all saved with the System name, i.e. batter, breader, predust.
I have a project that has a variable number of worksheets, dependant on the number of models in the job. These worksheets usually only use a single page, but may use two pages if the model is large (not often the case though). I have a "Template1" worksheet that is copied as a whole, to equal the number of models.
To minimize the file size that is generated when copying out the "Template1" worksheet, I have put the template of the second page on a separate worksheet "Template2". Now the initial copy is only of a single page, and the second page is only copied into the new worksheet if needed.
Sub AddPg2()
Dim CrntPg As String
CrntPg = ThisWorkbook.ActiveSheet. Name
Application. ScreenUpdating = False
ThisWorkbook.Worksheets("Template2").Visible = True
Worksheets("Template2").Activate
ActiveSheet.Range("A47:T96").Select
Selection.Copy
Worksheets(CrntPg).Activate
ActiveSheet.Range("A47").Select
ActiveSheet.Paste
ActiveSheet.Range("D58").Select
ThisWorkbook.Worksheets("Template2").Visible = False
Application.ScreenUpdating = True
End Sub
If I do this process manually, I toggle DesignMode "on", and it works, but I if I record the process, toggling DesignMode does not show in the code. how to include the comboboxes and checkboxes in the copy/paste process.
I would to ask how do I match the values in Sheet1 and Sheet2. As you can see in the attached example, I need to get first in Sheet3 if there is a certain individual in Sheet2 from Sheet1. After that, I need now to fill out the remaining columns in Sheet3 to match values for the corresponding names.
View 3 Replies View RelatedSituation:
I have two drop down lists 1) Country and 2) States/province
Country has list: [US, Canada]
If "US" is selected, [Arizona ,Florida, NewYork] is listed in the 2nd drop down list
If "Canada" is selected, [Alberta, Ontario, Quebec] is listed in the 2nd drop down list
Scenario:
First, I select "US" and choose the states to "Florida"
Next I change the country to "Canada" and forgot to choose province
Then, the 2nd dropdown list is changed to [Alberta, Ontario, Quebec],
BUT the current value is still "Florida"
Probem:
Now I have "Canada" and "Florida" selected in the sheet
Question:
If the primary list is changed, can I make the 2nd drop down list to show a default value (e.g. blank or the first entry i.e. Alberta)?
I am working on a spreadsheet for my Building company. I'm building a tool to price for Fascia, Soffits and Cladding.
I'm using Macbook Pro Microsoft Office for Mac 2011
Please see attached file
The first sheet holds all the lists of products, Category Headings list is in column A and then all the relevant products and prices are then from B to BI. I have defined each category with a name by selecting the cells and entering a name in the name box.
The second sheet is a Calculator in which I would like a to have a drop down list in the Category Column (Which I have worked out how to do myself - good old google) and then a drop down list in the second column which lets the user select from a list of results based on the selection from the previous column.
Example:
Category(B3) - 18mm Fascia/Replacement Board (Square White) - Drop down menu taken from sheet 1 A3:A33
Description (C3) - Drop down list containing all the options from D2:D15 Named "FasciaReplacementBoard18mmWhite"
So basically, whatever the user selects in Column B (from the category list) a drop down list would be available in Column C
The Value column would then show a value based on the options selected.
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies View RelatedI have a report that I need to divide data onto different sheets based on a value in a particular column, and am working with 3 sheets.
Sheet1 is the entire database of information
Sheet2 is the entire row of data from Sheet1 where column3 value on Sheet1 is "SC"
Sheet3 is the entire row of data from Sheet1 where column3 value on Sheet1 is "TC"
Sheet1 has 15 columns, and the number of rows vary (up to 2000). The loop would end if there are consecutive blank fields in column 1 of any of the rows, as there is not always data in column 3.
What I'd like to do is to have the block of rows starting from "Agent:" and ending with "Total" copied into a separate worksheet and then have the worksheet named using the agent's name. I have highlighted the data in yellow in the attached reference file. I would like to have this done for all 58 agents. I could copy and paste manually but that wouldn't be the smartest way to go about this. I figure I probably need a looping structure for this but I am not yet proficient enough to figure this out quickly. I am supposed to have this done today.
Edit: The last part of this would be to have blocks of rows from the "sections" worksheet which use identical agent names also pasted below the data from the "questions" worksheet. I have attached the workbook I am working on now cutting and pasting manually.
I wanted to create a target workbook that is a subset of the source workbook
1) I want to specify a list of worksheets in the source workbook:
For Each WSCurrent In Sheets(Array("SheetA", "SheetB", "SheetC"))
Next WSCurrent
2) I want to them copy these sheets into another workbook (don't know how to code this)
3) I then want to hardcode all these sheets (I don't know the most efficient way to do this)
4) Lastly, I want to eliminate certain columns (can be fed through a hardcoded list of Columns to delete e.g. X, W, Z)
