I have a file with four worksheets. The first is the master sheet. The other three sheets we can call "SheetB" "SheetC" and "SheetD." The actual names are quite long. Column T of the master sheet (except for the header row) contains dates formatted as text in YYYYMM format. I need a macro that will copy the rows to the other three sheets based on these criteria:
SheetB - dates April 2010 or before
SheetC - dates May 2010 to April 2011
SheetD - dates May 2011 and beyond
The data columns in both the workbooks are of same length,I just want to copy the corresponding columns from source to destination as per above referenced cells.
This should be a fairly simple question, I've already got the code for copying sorted, I'm just curious about several of the named ranges within the sheet and what happens to them when I copy it all over.
I'm working from a spreadsheet made by my predecessor and they've got a template sheet with numerous named rages all scoped to the workbook, on the new template I've created, it has lots of ranges scoped to the sheet itself. The new template works just fine as it is but I just want to try and make sure that when I change over the templates it will continue to work fine and the current template's named ranges are going, so far I have actually copied everything and are running tests, but you can't test for everything, so if the named ranges on the new template being only scoped to the sheet will affect it at all?
I am using Excel 2003. I have a worksheet called "RawData" which has a continuous list of invoices, I need to separate off the first invoice from the rest of the invoices into a new worksheet and call it "sheet1". The number of rows from cell A1 at the top left corner varies and is never constant from invoice to invoice however the last row of the invoice I need to move always includes the text string "NET PAYABLE TO".
So I need to copy all rows from "A1" to the row that has the text to a new worksheet called "sheet1", I then need to delete those rows only from the original "RawData" worksheet, leaving the remaining invoices in "RawData" intact. If it is helpful to you, the first row on every invoice has the text string "TAX INVOICE".
There are no empty rows between the "NET PAYABLE TO" row at the end of an invoice and the "TAX INVOICE" row at the start of the next invoice, so it is literally a continuous list.
Can this routine then be continued on all the other invoices in "RawData", copying them to new worksheets in the same workbook "sheet2","sheet3" etc until there is no data left in RawData, bearing in mind that there may be 10 invoices or 100 invoices in the "RawData" sheet.
I am trying to copy and paste between workbooks that are defined in an array. However, I get an out of range error when the code first reaches the line Workbooks(Wkbk(WkbkNum)).Activate.
Sub Gather_Risks()
Dim MasterRow As Integer ' Declares row number in Master Worksheet Dim RowNum As Integer ' Declares row number in active array worksheet Dim Wkbk(13) As String
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
Columns in Sheet 1 are the following: company PERMNO number, dates, market capitalization (no data in this one)
Columns in Sheet 2 are the following:
company PERMNO number, ticker, dates, market capitalization
In Sheet2, there is a whole range of dates (between 1990 and 2004) for every single company, whereas in Sheet2 there is one or 3-4 dates for a every single company.
I would like to match the exact date/dates in Sheet1 in the range of dates in Sheet2 and then if they match, copy the corresponding cell value from the market capitalization column in Sheet2 to the empty market capitalization column in Sheet1. I also want that the company PERNO numbers match.
In short: if PERMNO numbers match, match the date/dates in Sheet1 within the range of dates for the same company in Sheet 2 and copy the market capitalization value to Sheet1.
Example:
Sheet1: A B C 1. PERMNO DATES MARKETCAP 2. 13123 199803 3. 13123 199904 4. 65456 200005 5. 44550 200104 6. 44550 200211......
I have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
I would like to perform a calculation with each cell in a range from 2 worksheets and place the result in a range on a third worksheet.
I thought I could use the For Each Cell in Range construct but I don't see how to reference the two ranges in a nested pair of For loops. I am sure there must be an simple/elegant way to do this.
I have 12 worksheets, 1 for each month. The first worksheet is filled out with all the coreect formulas and is in the correct layout. How do I copy the first worksheet to the rest of the worsheets exactly so that all the formulas, cell arrangement and the page setup is correct?
I know how to highlight, copy and paste but this does not seem to transfer everything.
I have a workbook with multiple worksheets. Each worksheet corresponds to a certain store fixture estimate. Ont these sheets I have a specific cell where you can input how many fixtures of that type are to be used.
On that sheet also, is a range of cells (ex. Range("A65:F3340")) that needs to be copied to a new summations sheet of total hours to build the project.
If sheet 1 has 1 fixture - the macro should copy the range of cells only once. Sheet 2 has 4 fixtures - tha macro should copy the same range four times appending each set of data tot eh end of the previous, And so on for each fixture sheet.
I am trying to use an ActiveX CommandButton on Sheet40 to do the following:
Sheet40 (E31:AN39) = sum of (E31:AN39) for sheets 6-15 PROVIDED that cell D3= "y" in those sheets
So the steps are: (1) Among sheets 6-15 select those in which cell D3 = "y" (2) Set the range of (E31:AN39) in sheet40 to the sum of the same range in the selected sheets
ie cell E31 = sum of cells E31 in selected sheets... cell E32 same... cell AN39 same
I have a worksheet in a workbook that is for 1 of 8 sub-projects. I have all the macros running perfectly and everything looks fine. Now, I have to duplicate that sheet 7 more times and create a Summary sheet for the entire workbook. My question is this:
How can I make it easy to set up named ranges in the new sheets so I don't have to pick each new range in each sheet and define names individually?
Example of a small macro... Sub ActCurrJTDtoActPrevJTD() Application.Goto Reference:="AActHrsCurrPeriod" Selection.Copy Application.Goto Reference:="AActHrsPrevPeriod" Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _ False, Transpose:=False Range("A1:V1").Select Application.CutCopyMode = False End Sub
I need to duplicate AActHrsCurrPeriod into BActHrsCurrPeriod and CActHrsCurrPeriod, up to an H version.
Clicking the button opens the MSgbox then on clicking Yes to run the code it stops on - Range("E3:BU98").Select - saying range selection method failed, and i cant understand why it seems to be such a simple piece of code.
Private Sub CommandButton2_Click() Dim msg2 As Integer msg2 = MsgBox("Has a back up copy been saved?" & vbCr & "Are you sure you want to clear all existing products and their results?", vbYesNo, "Delete Products?") If msg2 = 6 Then Worksheets("Input Record").Activate Range("E3:BU98").Select Selection.ClearContents Worksheets("Results record").Activate Range("E3:CA23").Select Selection.ClearContents Worksheets("Input Page").Activate End If End Sub
I would like to link a sheet to another sheet in the same workbook. The link would indicate what week of information is needed. I would like the source (weekly information )page to go to the top of the page with the requested data. If I use a hyperlink it directs to the source page but this data could be several rows down. How do I create a link and have the source page provide the data at the top of the page?
I have three sheets: On sheet 1, I have a list of products ( Down ) with Bought and sold info by time period ( Across ). On sheet 2, I have the same list of products from sheet 1 ( May not be in the same order ) with " Attributes " associated to them ( e.g. male, female etc ). On Sheet 3: I would like to add the Bought and sold info by time period on sheet 1 by attribute as per sheet 2
I have 2 worksheets. The first worksheet contaions raw data. On the second worksheet I am pasting certain data from the first worksheet. Everything copies except the data in column BI. This column has blanks as well as numbers. I need the column copied as is. The range should equal the number of entries in column A. Why am I getting the error, and Is there an easier way than what I'm using?
I have a master spread sheet that contains many products which are then grouped into system. Typically, three or four products make up a system but it can be as few as 1 or as many as 6.
The master spread sheet contains all the products. But I would like to be able to create new worksheets where the new worksheet would only contain the tabs of the system.
All the tabs are named as follows: Product #, then system name: Here are examples: (all of the product names will contain the same amount of characters, but the system names will vary in the amount of characters necessary).
Thus, I would want the first 3 in a Worksheet, then Next two in a worksheet, and so on. A bonus would be if the worksheets were all saved with the System name, i.e. batter, breader, predust.
I have a project that has a variable number of worksheets, dependant on the number of models in the job. These worksheets usually only use a single page, but may use two pages if the model is large (not often the case though). I have a "Template1" worksheet that is copied as a whole, to equal the number of models.
To minimize the file size that is generated when copying out the "Template1" worksheet, I have put the template of the second page on a separate worksheet "Template2". Now the initial copy is only of a single page, and the second page is only copied into the new worksheet if needed.
Sub AddPg2() Dim CrntPg As String CrntPg = ThisWorkbook.ActiveSheet. Name Application. ScreenUpdating = False ThisWorkbook.Worksheets("Template2").Visible = True Worksheets("Template2").Activate ActiveSheet.Range("A47:T96").Select Selection.Copy Worksheets(CrntPg).Activate ActiveSheet.Range("A47").Select ActiveSheet.Paste ActiveSheet.Range("D58").Select ThisWorkbook.Worksheets("Template2").Visible = False Application.ScreenUpdating = True End Sub
If I do this process manually, I toggle DesignMode "on", and it works, but I if I record the process, toggling DesignMode does not show in the code. how to include the comboboxes and checkboxes in the copy/paste process.
I would to ask how do I match the values in Sheet1 and Sheet2. As you can see in the attached example, I need to get first in Sheet3 if there is a certain individual in Sheet2 from Sheet1. After that, I need now to fill out the remaining columns in Sheet3 to match values for the corresponding names.
I am working on a project to import cellular phone usage data from Sprint into a workbook.
All cells in Column A are blank. Column B contains 1 instance of the cell phone account #, followed by dates of calls made, which continues until the next cell phone account # appears, and it’s calls made. The # of calls made obviously varies per account #.
The dates are in date format. The cell phone account # is in text format and is formatted with blue fill.
I need to copy the cell phone account # into column A for each line that has a date value in ColumnB, but the value copied must change when it reaches the next cell phone account #, so that the calls are matched up with the cell phone account # and can be imported into SQL.
Acct # Date Time City Called from State Called From Called # City Called State Called................
Sub transpose_UPCID() Application.CutCopyMode = False Range("A7:B7").Select Range(Selection, Selection.End(xlDown)).Select Selection.Copy Sheets("BAUCS").Range("C11").PasteSpecial Paste:=xlValues, _ Operation:=xlNone, SkipBlanks:=False _ , Transpose:=True Application.CutCopyMode = True End Sub
This macro copies a range and paste it in another worksheet. I dont now how to make this macro to copy another range at the same time and copy it to row C37.
How can I make both things at the same time? The code I am showing here copies and paste product codes. I need to select and copy the production (which is in column F) for each product code and paste it starting in C37.
I'm trying to copy range from one worksheet to another. I'm guessing there must be something wrong with my syntax here:
For Count = 2 To 50 If Sheets("sheet1").Range("H" & (Count)) < 0.1 Then Sheets("sheet3").Range("A" & (next_place), "K" & (next_place)) = Sheets("sheet1").Range("A" & (Count), "K" & (Count)) next_place = next_place + 1 End If Next Count
What I am attempting to do is take data from two columns on multiple sheets within the same workbook file and consolidate them using a macro. (End result would be a sum of the numbers associated with the adjacent name calculated using all the sheets data--as some names would appear on other sheets as well).
The first column is a list of names and the second is a list of numbers. I have titled the columns the same on each sheet and placed them in the same location. However, the number of rows of data each sheet contains will vary per sheet. (For example: one sheet might have 10 rows of names while the next might have 15 or so). Also, each time this file is to be used, there might be a differing number of sheets, as users add or remove a sheet.
Is it possible to create a macro that can scan the all the varying sheets's data and output a consolidation?
I have been able to create both a pivot table and use the consolidation feature by selecting the date ranges manually, but I am lost on how to automate this for other users that have very little excel knowledge.
I've uploaded an example file in case my explanation isn't clear.
I have a spreadsheet of several sheets, but 7 of them (Red, Orange, Yellow, Green, Blue, Purple, Black) are the guts of the file and where I make adjustments. The layout of these sheets is the same, there are several cells of data on each sheet that coordinate with data in the same cell on other sheets. The problem is the sheets are so big, when I change sheets I have to go find the data that was in the same cell (or close) to where I just was on a previous sheet. So for example if on “Red” I am in cell AX253 and I go to sheet “Yellow” I would like it if AX253 would be selected when I get there. And if I select a different cell like D56 on Yellow and pick Green then I want D56 to be automatically selected on Green.
In addition, I plan to use a check box on an eighth sheet called “White” to turn the feature on and off. I have never written code for a check box before.
Is this to terribly difficult to do? I did some searching and saw some code that was similar to this but could not get it to work.
