Remove Toolbars Upon Open/Re-instate Upon Close
Aug 19, 2006
Is it possible to use a function that removes all toolbars upon opening the workbook and reinstates the same upon closing, the work book i am currently using does the following as described in the code. however the function is limited in that only toolbars stated in the code will be removed, if for instance there was an adobe toolbar, that remains on the screen. or is there a better way of going about this? On open:
Private Sub Workbook_Open()
Run ("CreatePReturn")
Run ("CreateProceed")
With Application
.CommandBars(" Formatting").Visible = False
.CommandBars("Standard").Visible = False
.CommandBars("Drawing").Visible = False
.CommandBars("Return").Visible = False
.CommandBars("Proceed").Visible = False
.CommandBars("Worksheet Menu Bar").Enabled = False
.CommandBars(" Chart Menu Bar").Enabled = False
.DisplayFormulaBar = False
.DisplayStatusBar = False
End With
With ActiveWindow
.DisplayHeadings = False
.DisplayHorizontalScrollBar = False
.DisplayVerticalScrollBar = False
.DisplayWorkbookTabs = False
End With.................................
View 4 Replies
ADVERTISEMENT
Mar 2, 2007
This code snippet works when executed from a worksheet (it puts Menu Bar back) but returns an error when used in the This Workbook module.
Application.CommandBars("Worksheet Menu Bar").Enabled = True
CommandBars("ToolBar List").Enabled = True
CommandBars("Ply").Enabled = True
View 4 Replies
View Related
Mar 27, 2008
I have a slight problem with some code I am using. I have a user form where I force the users to enable Macros using the hidden sheets trick. Once the user enables the macros all of the toolbars dissapear from excel. The code I use to do this is below:
View 14 Replies
View Related
Oct 4, 2006
I want a code that removes all toolbars from excel when the .xls file is opened, then restores all toolbars back to their original setting when the .xls file is closed.
View 9 Replies
View Related
Dec 29, 2007
is there any way that i can remove the excel title bar and scrolling tabs so that the excel sheet do not resemble an excel document?
View 2 Replies
View Related
Jan 26, 2013
How would the attached file code be ammended to remove a blank row and then move all remaining rows below up one ?
Example: Open the attached file (Transport Log version 1). If you double-click in cell "X10" (for patient Abe Lincoln), the data for row 10 will be removed and written to Sheet #2. Closing the file and reopening, row 10 is empty with other rows below remaining. The goal is to move the data in rows 11 and 12 (and any subsequent rows that may be entered below those) up one row.
The above method would be an indication to users making subsequent entries to always use the first empty row below all existing data.
View 1 Replies
View Related
Dec 18, 2009
I have a function (courtesy of Walkanbach) to create a userform, very useful as it means I keep memory down as I can create the UF's as I go and tweak to suit.
I have been trying to get the userform to be removed when the user closes it. The close action in this case is the X button top right as this userform only has the userform itself and a listbox.
When I set the code for the event procedure it doesn't error, but nothing happens. The microsoft help pages seem to suggest that you can't remove a userform through vba, but I find that hard to believe. I've tried variations on the close procedure and all to no avail so far.
Dim xInt As Integer
With TempForm.CodeModule
xInt = .CountOfLines
.InsertLines xInt + 1, "Private Sub TempForm_Terminate()"
.InsertLines xInt + 2, "ThisWorkbook.VBProject.VBComponents.Remove TempForm"
.InsertLines xInt + 3, "End Sub"
End With
View 9 Replies
View Related
Apr 15, 2005
I have been deleting some VBComponents by using the .remove command and they get tagged for deletion but do not actually get deleted until after my VBA sub ends and control is returned to excel.
I would like to save the changes before control is returned to the user. I'm not really sure why the deletion is being held up until execution ends, it even waits until all calling functions have also finished their execution.
View 9 Replies
View Related
Oct 10, 2008
how you can remove the close 'X' on the title bar of a user form please? I have used this for a password input box but if the user selects the 'X' on the title bar then it closes the password box without them having to enter a password and allows them into the workbook.
View 2 Replies
View Related
Jun 11, 2008
I have an issue where users to a work book are selecting autofilter and then saving the document with rows filtered out, which I wish to prevent or at least warn them to remove the filter before allowing the save function.
The document is never 'Save As', it's always 'Save' from the toolbar icon.
They should be permitted to save the document, but only after this check has been completed and a message issued if the filter is on.
View 4 Replies
View Related
Apr 14, 2008
Can I take
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls")
and do something like this?
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls") Not _
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls")
I have a userform that I would like with a click of a button to open the workbook and then click the same button to close the workbook after it has been viewed.
View 9 Replies
View Related
Mar 2, 2008
I've found a link on OzGrid "How to remove the (X) CloseButton from Userforms" but I can't seem to get it to work with Excel 2003. The code looks like it was written for Excel '95, '97 and 2000.
View 6 Replies
View Related
Jan 16, 2009
When i open excel it give an error and it close. My computer up to date about office upgrades. And i try to repair my office but it doesnt solve my problem.
View 7 Replies
View Related
Jun 3, 2014
Below is the code to open a csv file and paste it in the workbook "ResultFile". When i click on a button, a csv file will open to copy the values and paste it in "Resultfile". Now, i want to close the csv or excel file to be closed once copying has done.
where to put the close file.
[Code] ....
View 2 Replies
View Related
Jul 27, 2006
I'm creating a template that will be opened by users and saved to a new name based on info provided by the user. I have macros triggered when opening and closing the workbook. The Before Closing sub does some data transfer between workseets. I'm running into a problem with the Open sub, however. I wanted to give the user a chance to abort the opening, giving a dialog that allows canceling. I wanted to just close the workbook.
However, if I include an Active.Workbook.Close line in the Open sub, it of course triggers the Before Close sub, but it leaves the On Open sub hanging. The workbook closes, but the next time I open it, the dialog in the Open sub doesn't come up. Close again, and it works ok or quit Excel between openings and it is ok. If I let the Open macro complete, bypassing the remainder of the macro if the user indcates canceling, how to I trigger closing within VBA? If the Open macro completes without an Activeworkbook.close statement things will just sit there until the user initiates closing.
Is there a way to terminate the Open sub from within the Before Closing sub if I create a flag to indicate closing started during the open sub or some other way around this problem?
View 5 Replies
View Related
Feb 25, 2008
I made an Excel based program that uses multiple workbooks with two main workbooks (“Master List” and “Products”) that all the others pull information from. I run into a problem when a user clicks the close X in the upper right hand corner and the entire application closes. I found some code that will let me close all the workbooks but one (the code is put in the “Products” workbook in the BeforeClose event).
For Each wb In Workbooks
If Not wb Is ThisWorkbook Then
wb.Close SaveChanges:=True
End If
Next wb
Is there a way to modify the code so it will close all the workbooks but the two main ones if someone clicks the close X button in the upper right hand corner?
View 3 Replies
View Related
Apr 10, 2008
When i open an excel file, i need it to print 3 copies and then close itself without saving. This is because i have a file that must have 3 copies printed everyday. I know its lazy =) but i'm sure it will be very useful and i have seen it on a file before however i cannot successfully replicate it.
View 3 Replies
View Related
Mar 5, 2007
I've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.
When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).
View 9 Replies
View Related
Feb 1, 2010
I am working with a bunch of files to do a dashboard. I have the main file which shows end results and what my users will see "Dashboard". I have about 10-15 files which I export weekly from MS Access. and I have the "Dashboard Data" file. In this file I have a sheet which links all the information for the files exported from MS Access. In here I have named ranges and dynamic ranges plus additional columns created to look up information in other tables. I use this file as my source data for my Dashboard File so that I can reduce the size of the actually dashboard. Dashboard Data file is about 5.5 mb and my Dashboard is 300kb. I have 12 branches that need to view the data over a radius of a hundred miles so the smal file are better.
My problem: I can get the Dashboard Data file to update without opening all the 10-15 other files. I cant however make the Dashboard file update without opening the Dashboard Data file. I have it to auto update without prompting but its still tells me that it cannot update. I was wondering if there is some VBA code I could use that would work like this:
I open the Dashboard File, Dashboard Data file opens so that Dashboard file updates and then close Dashboard Data File so that the user never has to see the Dashboard Data file. I dont want them to see it or have access to it.
View 11 Replies
View Related
Jul 10, 2012
I use the below code to close ALL open Internet Explorer pages. Im trying to adapt this to close ALL Windows Explorer Folders.
Dim Shell As Object
Dim IE As Object
Dim i As Variant
Set Shell = CreateObject("Shell.Application")
i = Shell.Windows.Count
On Error Resume Next
Do While i > 0
i = i - 1
Set IE = Shell.Windows(i)
If TypeName(IE.Document) = "HTMLDocument" Then IE.Quit
Loop
View 3 Replies
View Related
Feb 11, 2013
I have a batch script which runs the following line to open my excel sheet:
start m:exportad.xls
when this sheet opens it automatically refreshes from a csv file.
The problem is that I want this sheet to open, refresh and close. To close Excel I have been using the taskkill command in my batch script, but I have found that using this method doesn't update the sheet properly - the sheet only updates properly if I close Excel in the correct way, but this means manual input and I want this to be automatic.
View 3 Replies
View Related
Feb 21, 2013
I opened a file, by file I mean a "file" with no extension that has commas separating it.
So I recorded a macro to open up the file and this works fine.
How do I close it? I tried
wk1 = ThisWorkbook.Name 'Main Worksheet
...
Workbooks(wk1).Activate
ActiveWindow.Close
But the problem is that "wk1" is not set equal to the name, probably because the file is not an excel file, it has no extension.
View 2 Replies
View Related
Apr 30, 2013
I know the shortcut for grouping columns in excel is Alt + D + G + G or Shift + Alt + Right Arrow. Is there a shortcut to actually open and close grouped columns (i.e., the equivalent of clicking on the + sign at the top) without using the mouse?
View 1 Replies
View Related
Aug 6, 2013
I use the following code to open an existing open workbook in a new instance of Excel...
Everything works fine... What I would like to do is close (when I say close I mean, completely exit/quit the application). I'm not able to do that, the original Excel instance stays open with no spreadsheet open. I would just like it force the application to quit so that after running the code I would just have one Excel instance open (with the desired workbook, which works fine now)...
Public Sub Re_open_workbook()
Application.DisplayAlerts = False
ThisWorkbook.Save
[Code].....
View 1 Replies
View Related
Apr 10, 2014
Is there a way to automatically open or close all grouped rows on a specific worksheet or for specific rows?
View 5 Replies
View Related
Mar 22, 2006
Assume that the workbook Book1.xls opens a user form named myUserForm.
I'm trying to show only the user form on the desktop when I open Book1.xls, with Book1.xls minimized on the Taskbar.
And , if the Cancel button on the form is clicked, then unload the form and close Book1.xls.
That simple!
In ThisWorkbook, I have the event:
Private Sub Workbook_Open()
ActiveWindow.WindowState = xlMinimized
ShowTheForm
End Sub
On the Form, I have the Cancel button:
Private Sub btnCancel_Click()
Unload Me
ThisWorkbook.Close True
End Sub
The above procedure shows the form, with Microsoft Excel blank window in the background, and produces a small bar at the bottom left of the screen for Book1.xls
Click the Cancel button, and both the Form and Book1.xls close, but the blank Excel window remain open !
I suppose I would not be able to edit this version of Book1.xls, but that is fine for now!
View 9 Replies
View Related
Oct 22, 2008
this has to be the easiest thing ever. I want to (on opening one file) open another, and hide it (the second file), and then when closing the first file, I want to close the second file as well....
View 9 Replies
View Related
Feb 25, 2009
I need to check if a .txt file is open. If yes, need to close it.
View 9 Replies
View Related
Dec 29, 2006
I am trying to append 365 text files into a single Excel sheet. The files have unique names corresponding to the day of data that they represent (i.e. 0101.txt, 0102.txt, 0103.txt etc.) I am looking for some code that will loop through a folder, open each file, copy all data, and append it without the headers into the single Excel sheet. Does anyone have some VBA code that would do this?
View 6 Replies
View Related
Sep 22, 2007
Code to check if a workbook is open, and close it, if it is.
View 4 Replies
View Related
