I am a softball coach and I want to create a fielding roster for my team. I have all the players names in column A (A4:A14). I have positions listed in column L (L4:L15) as follows: P, C, 1B, 2B, SS, 3B, LF, LC, CF, RC, RF, X. Cell range B4:H14 (7 innings) is where I need to have drop downs, but once I select a certain positions for one player in inning 1, for ex., I want it to not be available for the next player in the same inning.
i have a dropdown list called SN (for serial numbers). items are abc001-abc100. i would like to remove an item once ive selected it. i.e. if i have chosen abc001 on the first row, when i go to the next row and open the dropdown list, abc001 should not be there anymore. this is for me to avoid duplicate listing of the items.
I am trying to make some of my data validation dropdown list boxes narrower. I was told one way to do that is to use combo boxes. (If there are any other ways, please let me know!)
I don't think my combo boxes are working. I had tried to make a combo box appear in each data validation pulldown cell by using this tutorial:
http://www.contextures.com/xlDataVal10.html
I followed this tutorial word for word, but when I try to test the code at the end by double-clicking on a data validation pulldown cell, no combo box appears.
The below is causing me an issue as it is setting the ws value to equal nothing instead of sheet1 or sheet2 etc. I have my dimensions set above and there are no spelling mistakes.
It falls down on the VB : Set LastRow = ws.Range("a65536").End(xlUp) line but this seems to happen because ws is set to nothing.
VB: For iramp2 = 0 To ListBox1.ListCount - 1 If ListBox1.Selected(iramp2) Then Set ws = ActiveWorkbook.Sheets("Sheet" & iramp2) End If
I have a normal data validation box on excel, but I want to be able to navigate my way through it using a macro. I can select & opent the drop down list with the following SendKeys "%{DOWN}"
but then an action like
SendKeys "{UP}"
Does not navigate itself up the menu as a normal keystoke would. Any ideas on how to solve this? Basically, I want to select a cell, open the drop down menu, select the first choice in it (so thinking SendKeys "{HOME}{ENTER}" ) all using a macro.
Is there a limit to the number of entries in a validation list? I have a list that contains about 300 entries, but the drop-down list only shows 246 entries. I am sure that the references are correct.
I need to remove an item from a list, find its match in column "A", remove the matching cell and then shift the remainder of the column up to remove the empty cell.
If this helps, there are 5 different sheet names, and I'm working with range A4:Range("A" & Rows.Count).End(xlUp).Row for the items in the list.
To make it as simple as I can: COLUMN A one two three four
user clicked on two in the list, so column A now looks like, with no gap between one and three:
COLUMN A one three four
One sheet actually needs it to do the same removal to identical rows in column B as well (i.e. remove A10 and B10, or A45 and B45, etc.)
I have a drop down box on a worksheet and once I have selected the item I want from the list, I would like the price of that item to appear in the cell next to it..
I have a spread sheet for equipment that gets loaned out on a regular basis. Cells B4 - B25 have combo boxes in them, with the options to select "On Loan", "In Stock Room" etc in them. What I would like to do is create something so that as the combo box is changed, i.e. from "In Stock" to "On Loan", a date changes adjacent to each combo box.
For example, combo box in B10 has been changed from "In Stock" to "On Loan". The adjacent cell records the date automatically that the combo box was changed.
I have an excel form with a command (submit) button that opens up Outlook when clicked. I am looking for a way to have this submit button disappear when the user selects a specific item in a drop down list to make sure they do not email the form when it is used for a promotion (Promotion would be selected in the drop down).
I have a list that I need to move to another column without spaces. I have it moving without spaces but it is only one item over and over again. I am using Excel 2010 and that may be my issue. I have attached the exact worksheet and formula.
I have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
VB: 'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected) Private Sub ListBox1_Click() ListBox2.ListIndex = ListBox1.ListIndex End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
I would like to be able to make the same thing and select items for my drop down list, that are not blak and follow a specific condition. But I don't know how to include the condition in the array formula.
The condition I need is follow:
I want to have a dropdown list with Items that are not blank, and First N > Last N.
I tried using several of the formulas and VBA codes from other posts, but they just didn't work out quite right. And since I'm worthless at VBA coding, my changes either did nothing, ruined the code entirely, or blew up my computer : D . The attached doc should explain everything.
In the following extract, I would like to have today's date placed into Col K when an entry is made into Col J.
Entry into Col J is from a validation list of 3 options. What I desire is that when one of these options is selected ("Complete"), then I would like today's date to be written into Col K.
Currently Col K has a validation list which comprises dates from 1st of each month from July to June.
I need a fixed date as text preferably, so was thinking the VBA function "Date" on a Change Workbook Sub.
The information is currently part of a Table in Excel 2007 that has about 500 records.
I would like to know if it's possible to populate a data validation list based on what is selected from 4 validation lists?
for example: On sheet1: If 'Group1' is selected from data validation list1 then data validation list5 will show a list of all items from Group1. If 'Group2' is selected from data validation list2, then data validation list5 will display all the items in 'Group2'...
I have a list of 20 cities in K1:20 and they can be selected from a drop down menu in column A2:A22. I want then to randomly pick 6 out of 20 and these 6 cities must to appear in a line A1, B1, C1, D1, F1, and G1
On cell A1 I have used the
IF ( A2=K1,K1, IF(A3=K1,K1...................A22=K1,K1,IF(A2=K2,K2......A22=K3,K3)
It seem to be an endless formula is there another way to make it easy ???
I am struggling with work-schedule worksheet and I want to do this:
In my attached sample worksheet are cells coresponding to a day of the month (monday to sunday, and so on...), and cell for job positions. Each day I must assign 5 employees to a different job position (job positions are on drop down lists).
When I select first job (on specific day), I want a pop-up window where would show what job I have allready selected and what job hasn't been selected so far.
How can I do that, is It possible in VBA coding, maybe with Listbox or CheckedListbox.
I have 1 macro that i would like to be activated as soon as i select any item from a form control listbox (doesn't matter which item). i am not using an active X control but rather a form control.
I have userform with a combobox that fills up with data when the userform is opened. One of the enteries in this combobox is "Test" I want to hide/delete this from the combobox.
Is there a vb code to remove single item from an array by specifying the index. for example, MyArray ("A", "B", "C", "D"). If I want to remove "C" from the array, is it possible to somehow remove it by refering to it by its index (2). Does 'RemoveItem' command only work for a ListBox?
