Excel 2010 :: Not Able To Remove Blank Cells In New List Keeps Repeating Same Item?

May 21, 2013

I have a list that I need to move to another column without spaces. I have it moving without spaces but it is only one item over and over again. I am using Excel 2010 and that may be my issue. I have attached the exact worksheet and formula.

To Buy List.xlsx‎

View 2 Replies


Remove Item From Dropdown List In Excel Once Selected?

Oct 10, 2011

i have a dropdown list called SN (for serial numbers). items are abc001-abc100. i would like to remove an item once ive selected it. i.e. if i have chosen abc001 on the first row, when i go to the next row and open the dropdown list, abc001 should not be there anymore. this is for me to avoid duplicate listing of the items.

View 2 Replies View Related

Autofill Vertical List Horizontally With 2 Blank Cells In-between Each List Item

Feb 14, 2014

I have a list in column L2:L352. I would like to be able to start at AD2 and drag horizontally so that AD2 = L2, AE2 = <BLANK>, AF2 = <BLANK>, AG2 = L3, AH2 = <BLANK>, AI2 = <BLANK>, AJ2 = L4, etc.... until L352 has been autofilled.

View 2 Replies View Related

Excel 2010 :: VBA Repeating Formula(s) In Specified Cells Based On Defined Variables?

Dec 28, 2012

In my worksheet, I know the last line of my report AND I know how many "reporting segments" (all equidistant and identical) there are in the report based on the last row using the below (which I tested in several reports in messages):

Dim vListEnd As Variant
Dim vTaskCount As Double
vListEnd = ActiveSheet.Range("A1").Offset(Sheet1.Rows.Count - 1, 0).End(xlUp).Row
vTaskCount = ((vListEnd - 5) / 22)

My "reporting segments" are ALWAYS 22 rows each and the first one always starts in row 5. Example: A document where the last row (containing an End of Report special character) is 247 would have 11 reporting segments.

Within each reporting segment, there are two different formulas needed.

For the first reporting segment located in rows A5 thru J27:

I need FORMULA1 in all cells of the range (D5:D15 dragged out to H5:H10(not 15) and D18) and FORMULA2 in cells (F20:F22,J20:J22).

Then I need to repeat that vTaskCount number of times (number of segments) and at intervals of 22 (segment repeater offset). Some reports may have 2 segments, some might have 50, but the structure is always identical.

My formulas are all pretty simple if it makes a difference (originally using FormulaR1C1 = "=RC[-1]+RC[-3]" --- but because I now know solid cell locations I suppose I don't need to make them relative, too.)

View 2 Replies View Related

Remove Blank Cells From A List

Nov 13, 2006

Is there a way to remove blank cells from a list?





View 9 Replies View Related

Remove Blank Cells From List

Nov 14, 2006

I need to remove blank cells from a list of cells. I need to do this through a formula or a macro. I can't use Filter or Sort. Example:




Needs to look like:

View 2 Replies View Related

Data Validation List Automatically Show The First Item In The List Rather Than Showing Blank

Jun 20, 2008

I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.

View 10 Replies View Related

Excel 2010 :: Color Fill A Range Of Cells If Specific Cells Not Blank

Feb 7, 2013

I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.

I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.

View 7 Replies View Related

Remove Item From Validation List After Selected?

Feb 10, 2012

I am a softball coach and I want to create a fielding roster for my team. I have all the players names in column A (A4:A14). I have positions listed in column L (L4:L15) as follows: P, C, 1B, 2B, SS, 3B, LF, LC, CF, RC, RF, X. Cell range B4:H14 (7 innings) is where I need to have drop downs, but once I select a certain positions for one player in inning 1, for ex., I want it to not be available for the next player in the same inning.

View 6 Replies View Related

Excel 2010 :: Average Non-Blank Or Zero Cells

Sep 10, 2012

I have a sequence of 40 columns of data, representing 10 weeks worth of events with 4 values per week

I need to average the first pair for each week, ignoring zeros and blanks, and also separately the 2nd pair of cells, across the whole 40 columns

I am trying to come up with a neater solution which takes into account the zeros, at the moment I have the following which does not, for row 34


I could use SUM, COUNT COUNTIF etc but its gonna get messy

Using EXCEL 2010

View 5 Replies View Related

Remove List Item And Cell Contents, Then Shift Up

Oct 28, 2009

how to code the following?

I need to remove an item from a list, find its match in column "A", remove the matching cell and then shift the remainder of the column up to remove the empty cell.

If this helps, there are 5 different sheet names, and I'm working with range A4:Range("A" & Rows.Count).End(xlUp).Row for the items in the list.

To make it as simple as I can:

user clicked on two in the list, so column A now looks like, with no gap between one and three:


One sheet actually needs it to do the same removal to identical rows in column B as well (i.e. remove A10 and B10, or A45 and B45, etc.)

View 9 Replies View Related

Excel 2010 :: Auto Summary From Non-Blank Cells

Aug 21, 2012

I have created a comparison sheet and compares my old one from last week to the new one I create for this week.
It populates cells with the differences and shows me the data from the new sheet. But since my they are so massive A5:AZ20,000 I want to create an auto summary or something.

Column A has each properties Unique Identifier And the rest is various info for the property. I would like it to return my unique ID and then the columns with new data that has showed up from the comparison some are text and some are numbers.

Also I am using Excel 2010.

View 6 Replies View Related

Excel 2010 :: How To Fill Blank Cells Pivot Table

Dec 19, 2012

how to fill the blank cells in a Pivot table. I am using Excel 2007. How to do it in excel 2007. Heard that there is a provision in excel 2010 version.

View 9 Replies View Related

Excel 2010 :: Autofill Entering Data Against Blank Cells

Jan 23, 2014

In earlier versions if I used the double clicked the autofill handle it would only fill down to the next adjacent cell containing data. Now it fills down to the bottom of all the data regardless of whether there is a blank cell or not e.g


Now this happens

X X ...Z

How can I stop this as I need to enter different data in the next section?

View 1 Replies View Related

Excel 2010 :: SUMPRODUCT Answer To Return Blank When No Data In Specific Cells

May 12, 2013

I am using Excel 2010 and I am trying to average the amount of days in a month to a daily average per person in my worksheet.

Total sales per person
A5 = 10 - This is the Grand total per person for column A
A6 =4

Daily average per person
C5=2.6 - Average for all persons here

The formula I am using is:


Which gives me an answer of 2.6 in cell C5 as shown above which is what I am wanting.

Please note that my cell range for my staff goes from 6-15 for both Column A and C where the other cells are blank in both columns.

My question is, If I was to clear all the data in both Columns A6:A15 and C:6:C15, cell C5 would return to a #VALUE. How to I change the formula so that if the cells were Blank, cell C5 would also be blank until I enter data for each person again?

View 2 Replies View Related

Excel 2010 :: Filter To Select Records - Removing Unwanted Blank Cells

Jul 25, 2013

I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.

View 1 Replies View Related

Excel 2011 :: Sorting Blank Cells To The Top Of List

Feb 5, 2013

I am trying to sort a list of business development leads. When a lead is dead I enter the date in the column entitled "Closed". Therefore, the Closed cell for active leads is blank. Whilst I still wish to retain the information of dead leads, when sorting I would like them listed at the bottom of the list. However, whenever I sort on the Closed column, whether using newest to oldest or oldest to newest, the blank cells are always at the bottom, instead of the top.

How to get the sorted blank cells to the top?

I'm using Excel 2011 on Mac OS X 10.7.

View 2 Replies View Related

Excel 2011 :: Analyzing List Of Repeating Codes With Values Greater Than -1?

Feb 4, 2013

I am using Excel 2011 on a mac. I have a selection of data that lists a repeating code (say group 1, group 2, group 3 etc)and a value (-1,-2.3,3,6 etc) and need to find a quick way group together all the codes and next to that a value that counts how many values who share the same code hold a value greater than -1? I can do this myself in a pivot chat with count totals but my issue is how I can show the number of codes greater than -1.

Attached is an example of the data I want to sort.

Example of data that needs sorting.xlsx

View 1 Replies View Related

Excel 2010 :: Run Listbox CLICK Event After Item Is Selected?

Feb 21, 2013

Excel 2007/2010.

Hope this is fairly easy to solve. I have Screen #1 with a listbox with a CLICK event. The event populates a combobox below (with items based on listbox's selection). Listbox is NOT multi-select. Code runs fine manually, i.e., user opens screen selects from listbox, then can select from combobox.

I now what to open and make selections from another form/screen, Screen #2. I've written code to select the proper item from Screen #2's listbox but this does NOT trigger the listbox's CLICK event for me so the combobox isn't populated so I can then make that selection from Screen #1, also. I've tried setting focus to listbox first, then making selection, but that doesn't work.

QUESTION: Is there code that selects from a listbox in a way that mimics the user clicking the selected item in the listbox?

The alternatives I can think of are:
1) Change Screen #2's listbox code from CLICK to CHANGE event, but I'd rather not.
2) Move CLICK event code to sub-procedure and then call from both listbox CLICK and Screen #2 code
3) Some sendkey string like ENTER?

Would be easier to just mimic the user click, if possible.

With frm_Screen2
'Select item type from listbox
With .LBox_Items


View 7 Replies View Related

Excel 2010 :: VLookup Result Blank If Column Index Number Is Blank

Mar 3, 2014

The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.

I'm not sure how to say leave the result blank if the column index number is blank.

Excel 2010
Userform = Tab 1
Database = Tab 2

View 6 Replies View Related

Excel 2010 :: Shifting Cells Left And Then Up If Left Cell Is Blank?

May 8, 2014

I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.

To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.

Current data structure looks like
Variable 1
Variable 2
Variable 3


View 9 Replies View Related

Excel 2010 :: Find Or Remove Duplicates In Columns

May 11, 2014

I have following sheet:
Data from A1: BU1644

I need to check, if in A1:BU1 are any duplicate words.
All the formulas I found deal with finding duplicates downward (like A1:A1000).
Have not seen any formula which works across (from left to right)

Is there an easy way in Excel 2010 either to tag/ and -or remove the duplicate which I could apply and then just copy downward? The formula must work from left to right, because many words repeat downward.

View 2 Replies View Related

Excel 2010 :: Remove Data Connection And Keep PivotCache

Nov 26, 2012

With Excel 2010 a yellow warning bar is shown when opening a file with data connection. I don't want to show this warning to other users who will be opening the file, especially when they won't be able to update anything since the original data is on my computer. The logical way would be to remove or disable the connections before sending the file out. But when removing the data connections through Connection window all the pivot tables are converted to static tables, which is not acceptable. Is there any other solution to this? Maybe use a macro?

PS: I know that these warnings can be turned off though Trust Center, but I am not interested in changing these settings for other users.

View 2 Replies View Related

Excel 2010 :: Remove Password Protection From Worksheet

Dec 12, 2011

I have created a worksheet and password protected, I know the password but now want to send to someone and remove the password protection option instead of them having to use a password to open it.

View 5 Replies View Related

Excel 2010 :: How To Remove Horizontal Scroll Bar From Listbox

Feb 10, 2012

Using Excel 10, Win 7, a User Form with list box control, I only need one column about 7 characters long. (At this point my horizontal scroll bar is taking up more room than the list box window so I'd really like to lose it). I don't see any property options for scroll bars to set.

View 2 Replies View Related

Excel 2010 :: Quick Remove Spaces Macro?

Oct 29, 2012

I'm working on a sheet with about 10,000 rows and 8 columns worth of data. Most of them are formatted as 12345,12345,12345,23456 how they are supposed to be, but some of them will have spaces inbetween each sequence, or some even a couple spaces, or spaces at the end. For the most part I can use the replacement function with ", " to "," but some of the double spaces throw it off, and end spaces also. Is there a macro that can just search through the selected cells I pick to just remove all spaces so the data falls back onto the commas?

Working in excel 2010

View 7 Replies View Related

Excel 2010 :: Macro To Remove Rows With More Than 12 Months

Mar 7, 2013

I am looking for a macro that will remove any rows exceeding 12 months. Each month new data is added in and I am looking to remove anything over 12 months with the new month is added.

View 6 Replies View Related

Excel 2010 :: Combine Two Columns And Remove Duplicates Then Sum

Nov 15, 2013

I have a data in sheet1 as below :

Excel 2012ABCDE1Sr. No.PriceSr. No.Price

[Code] .........

And now looking for output in sheet2 as below :

Excel 2012ABCD1Sr. No.Price1Price2Total

[Code] ........

The sr.no. codes and price will keep changing in sheet1, it should automatically update in sheet2. Is it possible with either vba or formula?

View 4 Replies View Related

How Can I Remove Blank Cells Between Values?

Jan 25, 2009

s/s is 325501 rows deep. Down one column are values but these are seperated by blank cells.
I need to omit the blank cells so that all the values appear together, but keep them in the same formation (not sorted).

View 6 Replies View Related

Remove Blank Cells Between Values ??

Jan 25, 2009

s/s is 325501 rows deep. Down one column are values but these are seperated by blank cells. I need to omit the blank cells so that all the values appear together, but keep them in the same formation (not sorted).

View 4 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved