Remove Old Ribbon / Command Bar Customizations
Jun 15, 2009
What's the easiest way to remove all old commandbar / ribbon customizations from Excel 2007? Do I need to know names? How do I find those? It's ok if everything else is set to factory defaults too.
There's two thing I know about those customizations
1) When I right click a cell, it says "Clear All" three times. Each of those should be removed.
2) In the Ribbon there's a tab "TestiTab". It should be removed.
Nothing of those needs to be saved.
View 9 Replies
ADVERTISEMENT
Mar 17, 2009
Is it true that I have to enable macro and choose to trust access to the VBA project object model in order to create and run macros? It seems there is some security risk associated with making the workbook as macro enabled. What makes the commands run from the ribbon security free? Is it true that we can work around the macro security concern by creating a command button to the ribbon and run the macro from the command button? If yes, how come I could not find any discussion of creating the command buttons? I am using Excel 2007.
View 3 Replies
View Related
Jun 4, 2012
I'm making a Userform for commands I use a lot, like concatenation and highlighting cells. I placed a command button on the sheet that pops up whenever I open Excel. It's a bit awkward to have it on the sheet. Is there a way to place the button on the ribbon to get it out of the way? (I'm on an intermediary level with VBA
Another alternative would be to make a hide button on the userform, I guess. Once it disappears though I'd probably need another button to call it up again.
View 5 Replies
View Related
Aug 12, 2012
Is there any way to remove the ribbon from view completely. I am aware they allow us to minimize it and I can do that through VBA or Macros however I don't want the people doing the entry to have any access to the ribbon at all.
View 1 Replies
View Related
Mar 4, 2014
I would like to add a Command Button that will remove a row from a database. The user will perform a search, which will find the row associated with an employee name, and click a Command Button to remove that row. How can this be done, and are there any issues that might arise from something like this (in terms of formulas)?
Here is the code for the SEARCH:
[Code] .....
View 2 Replies
View Related
Jan 30, 2010
I have been using the following but hope there is something a little better to assure that all occurances of a particular command bar button is removed:
View 3 Replies
View Related
Apr 12, 2009
I have put a command button on one of my excel sheets and can't remove it. It will not highlight on both left or right clicks. Cant even change the text. how i can remove it.
View 9 Replies
View Related
Jan 29, 2013
I would like to remove spaces and utilize the alt+enter command - - I am more worried about removing the spaces than anything else at the moment.
Example:
D-1173-G-00002 D-1173-G-00065
D-1173-G-00002 D-1173-G-00065
D-1173-G-00045 D-1173-G-00064
Note: The spacing between these are not common throughout my entire column.
What I am looking for:
Example:
D-1173-G-00002
D-1173-G-00065
Example:
D-1173-G-00045
D-1173-G-00064
View 4 Replies
View Related
Feb 27, 2013
I'm having a problem creating a Reset All command button that will remove user entered unlocked cell values from an entire workbook save for one specific worksheet. So for example, I have five tabs labeled as "DTF", "Week 1", "Week 2", "Week 3" and "Week 4". I want one single command button (placed in the "DTF" worksheet) to remove all of the unlocked cell values from "Week 1" to "Week 4".
View 9 Replies
View Related
Jan 17, 2014
How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
View 3 Replies
View Related
Apr 14, 2009
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies
View Related
Apr 19, 2014
I am playing around with the Forfiles command (being called from Excel via Shell)..
I can't for the life of me get it apply a second command (such as getting the file size of each file)..
For example:
VB:
Private Sub CommandButton1_Click()
Dim Z
Z = Split(CreateObject("wscript.shell").exec("cmd /c forfiles /P C:UsersapoDesktopTextFiles /S /M *.* /d
[Code]....
The end result being the filename and the filesize shown..
View 4 Replies
View Related
Jun 20, 2013
Excel 2007
I have this simple formula: =IF(SEARCH("ABC",BQ239,1)>0,"Found", "Not Found")
Instead of saying Not Found when the value is not in the cell BQ239 text string I get #VALUE! returned
how do I get it to say "Not Found"? I searching for a substring that can be anywhere in the string.
View 2 Replies
View Related
Jul 25, 2012
I try to add add ins tab to the ribbon. i checked in customize ribbon. it is not coming.
View 8 Replies
View Related
Aug 13, 2014
How to create a button on the Ribbon (after you have created a group), and connect this button with a VBA code. So you can avoid going to developer->Macros->find the code and click run.
View 3 Replies
View Related
Mar 13, 2014
I am using this code to show met the amount of sheets listed.
[Code] ...
I use a commandbutton on a userform to add sheets regulary, is there a command that can then update the ribbon to the new count.
View 7 Replies
View Related
Sep 23, 2011
****** http-equiv="Content-Type" content="text/html; charset=utf-8">
****** name="ProgId" content="Word.Document">
****** name="Generator" content="Microsoft Word 14">
****** name="Originator" content="Microsoft Word 14">
I have opened a dodge workbook on which disabled the Feld List button in the pivot table contextual tab Options>Show>Field List.
I found the following line of code which confirms the command as being disabled by returning a FALSE message.
MsgBox Application.CommandBars.GetEnabledMso("PivotFieldListShowHide")
Now I need the code tore-enable this command.
View 9 Replies
View Related
Nov 8, 2012
I am looking for the settings if possible that will add to a custom tab in the ribbon.
What I have is an add-in that creates a custom tab in the excel ribbon. I save it as an add-in and activate it in excel options so it is available for all workbooks.
Now I have a callback in there that runs a macro that opens a workbook, this workbook also has custom UI that I want additional callbacks added to the same custom tab created in the add-in.
Is this possible?
View 2 Replies
View Related
Jan 9, 2014
I have a template sheet where the only thing the user need to do is fill in all the appropriate cells and the click the button that says SAVE to save the file to the right folder and file name.
I want to Grey out the ribbon completely so that user can even change the font or any thing else for that matter. The sheet and workbook is protected. Need a way to stop any unwanted tinkering.
View 3 Replies
View Related
May 14, 2008
Someone sent me a spreadsheet that made my ribbon and everything disappear. All that remains is the grid field and the title bar.
View 9 Replies
View Related
Sep 28, 2009
Sub ExcelOptionDialogSendkeys()
Application.SendKeys "{ESC 5}%TO"
End Sub
But if you happen to want to assign it to a Ribbon button click...
Sub rxExcelOptionsDialog(control As IRibbonControl)
Application.SendKeys "{ESC 5}%TO"
End Sub
the sendkeys method just doesn't seem to work under any circumstance.
View 9 Replies
View Related
Mar 2, 2010
I'm trying to finish a project, but the features at the top of the ribbon are faded out which means I have no access to any of them. How do I get access to them?
View 9 Replies
View Related
May 2, 2008
In a program that I'm intimately familiar with (Excel) I seem to find it annoying. ...or at least in my limited usage thus far it's been that way. Takes up a lot of screen real estate and seems to be a bit of a cluttered jumbled mess of text and graphics.
For programs I use less frequently (Publisher) it seems to be helpful. I can sorta right-click my way through lots of things and get stuff done. That's kinda nice.
For a program I use moderately (Word) it's sort of a toss-up. I can't find stuff easily, but once I figure it out, it seems like it's a more efficient design.
View 9 Replies
View Related
May 6, 2008
I imported an Excel spreadsheet from a computer running an older version of Excel to my computer with Excel 2007. I opened up the specially designed add-ins tab and started a new worksheet which I then saved. When the programme was closed and re-opened, the add-ins tab was missing so I could not continue working on my new file.
Is this a compatibility issue between the versions of Excel (yet everything worked fine when freshly opened)? Following the help instructions I could not recover the bespoke add-in tab.
how I get this back each time I open the file? It is important I get the bespoke add-ins as they are designed to input runners taking part in a race and working out the results afterwards in various categories.
View 3 Replies
View Related
Feb 15, 2013
I have an excel tool I am adapting to 2010 from 2003. It imports another tool which has been created elsewhere in my company and it is protected so I cannot alter it. This tool that I cannot change creates its own custom toolbar the "old fashioned" way so it dumps into the add-in tab on the ribbon. My tool opens this corporate tool and changes some items on the toolbar (enters values in a text box) and then imports data from it. However in run-time the custom toolbar never appears. Is there a way to refresh the ribbon in run-time after opening the file so I can then access the toolbar items?
View 1 Replies
View Related
Jan 2, 2009
I would like to restore some important functionality in Excel 2007 which has become disabled for a spreadsheet which I saved in different file formats.
I opened an Excel 2003 file with Excel 2007 and used 'Save As' into different formats (default, macro-enabled, binary) to see the resulting file size.
A number of Ribbon items are now greyed out for this file, including,
- Insert - Tables, Illustrations, charts, etc.
- Styles - conditional formatting and Format as table,
- Formula Auditing
- Data - just about all of them
- View - some of the Window items.
Also, I cannot resize or move a button on a worksheet.
Attempts to 'Save As' into the Excel 2003 format cause Excel 2007 to hang.
What caused so many features to become disabled?
How do I restore them?
View 6 Replies
View Related
Aug 23, 2013
I'm making a task sheet for my employees and would like them to see the option in the ribbon automatically that allows you to add a picture. I have made my custom ribbon with the "picture" command right under the Home tab. I want to email my workbook as an attachment to my employees and have that picture button right there in their ribbon when they open up the attachment. Is this possible?
View 3 Replies
View Related
Jun 24, 2014
I installed excel 2013, but I don't find the (VBA) buttons on the ribbon, since.
Is there a need to install an add in / or activate an add in?
The macro's are on the ribbon on the tab VIEW.
I expect to find the buttons on that place also.
View 3 Replies
View Related
Jun 23, 2012
I have the code that accompanies the attached spreadsheet model that locks the copy, paste, cut, double click and so on, with the right mouse button and shortcut keys, however, the toolbar excel these functions still remain active. How well I block access to the toolbar.
Desable_Ribbon.xlsm
View 14 Replies
View Related
Feb 25, 2012
I have some old code I use to use that still works but instead of adding to the top menu, the new command button is added to the add-ins menu list and then burried with other items.
Public Sub test()
Set myMenuBar = CommandBars.ActiveMenuBar
Set newMenu = myMenuBar.Controls.Add(Type:=msoControlPopup, temporary:=True)
newMenu.Caption = "Blotter"
[Code]....
View 4 Replies
View Related
