How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
I am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?
View 3 Replies View RelatedI am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.
View 3 Replies View RelatedI would like to add a Command Button that will remove a row from a database. The user will perform a search, which will find the row associated with an employee name, and click a Command Button to remove that row. How can this be done, and are there any issues that might arise from something like this (in terms of formulas)?
Here is the code for the SEARCH:
[Code] .....
I have been using the following but hope there is something a little better to assure that all occurances of a particular command bar button is removed:
View 3 Replies View RelatedI have put a command button on one of my excel sheets and can't remove it. It will not highlight on both left or right clicks. Cant even change the text. how i can remove it.
View 9 Replies View RelatedI'm having a problem creating a Reset All command button that will remove user entered unlocked cell values from an entire workbook save for one specific worksheet. So for example, I have five tabs labeled as "DTF", "Week 1", "Week 2", "Week 3" and "Week 4". I want one single command button (placed in the "DTF" worksheet) to remove all of the unlocked cell values from "Week 1" to "Week 4".
View 9 Replies View RelatedI'm trying to Filter a list by the criteria selected in a listbox, and activated by a command button. My problem is the sort criteria. I have 11 regions, numbered 01EPS through 11EPS. Sorting by any of these criteria works just fine.
The problem is that I also want to be able to sort by ALL of the regions at once. I can do this by using a custom filter. I recorded a macro to see what the difference was, and it simply a matter of changing 01EPS to "=*EPS". However, adding that to my case list results in an error message of "Compile Error: Syntax Error".
I used VBA codes to apply different passwords for different worksheets in a single excel workbook. They worked fine. Then i applied a password to the VBA code itself through the VBA project properties. Also worked.
But my problem is that, if any one enters a wrong password to open any of the worksheets, the VBA will open an error message window and when "end" option is clicked, the VBA code will open without any prompt for the password.Thus the entire purpose is defeated.
I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
I have 5 columns with an auto filter applied using the code below. I also have a form button in each column to reset the filter. What I would like is to have the form button turn "red' when the filter is applied and return to the orginal color when the filter is removed.
If it takes something other than a "form" button that is fine. I am looking for 2 "buttons" one to apply the filter, the other to alert you that the filter has been applied and to reset the filter when clicked.
Use filter for 2 columns of a CSV file, column A and Column B for certain words. Say I apply a text filter: contains "word1" or contains "word2" to Column A. Then I get the results. After that, I remove the filter to Column A then apply the same filter to Column B. The thing is, I don't get the results in Column B, instead, I get the cells in Column A wherein Column B is filtered PHOTOS BELOW:
The data that I get for this filter are:
And Word1 you
Word2 is blank
Apply filter to Column B, get the cells filtered in Column A:
The data that get for this filter are from Column A (which are cells filtered from Column B filter)
And Word1 you
Is the blah
Word is all
The results should in a single Column for both filter:
I have more than 100 files that needs to filtered this way, is there any way I can do this automatically?
Here is what the file looks like:
The results I hope would be possible:
Automatically without having to open all the files and have the results of all of it in 1 single Excel file?
----or----
If the above is not possible, open each file and automatically apply the filter into a column in just 1 click and without having to type the same filter for each column.
I found a code to combine all CSV files into 1 Excel file, but half of my files has more than 500k rows and the Excel's limit for rows is around 1million+.
build a spreadsheet that reads information off of a Master sheet onto 4 other sheets. The hope is that by making changes ONLY to the Master sheet that the other 4 will update automatically.
And then we ran into the trouble of not being able to insert new lines onto the Master sheet without throwing everything off on the other sheets.
(I've attached an example.)
For instance, if I go to the Master sheet in the Test.xlsx attachment, I've left out Lima from the alphabet. So, I insert a new row onto the Master, switch back to the Formula sheet where it should (theoretically) just update the cells to display the new data.
Not so. The Formula sheet just skips the new A13 and keeps on going.
the primary one seems to be using Offset. Well, the coworker will be adding and deleting many, many rows over the course of the year, as it is a product log and we change our products often.
I am trying to use the status of Conditional Formatting to toggle on/off protection for a cell.
I have a cell with Conditional Formatting applied if the result of a formula is true. If the Conditional Formatting is applied, I want the cell protection turned on so a user can not change the entry in the cell. If Conditional Formatting is not applied (false), cell protection is turned off and the user may edit.
I am using Excel 2010 and Vista.
Using Excel 2003.
I have a spreadsheet that summarizes all of our assets in cell C1947: subtotal(3,D2:D1944)
In column G, I have a "Y" or "N" or BLANKS "". I'm trying to come up with a formula that would give me the correct totals for the Y's or N's or blanks when I select one of the AutoFilter columns. For example:
I currently have 1,943 assets. Column G has the Y's N's and blanks. This is showing all the assets. If I select column F which is a specific location, I would like to see the correct count of Y's N's and blanks while the subtotal command shows the total assets.
Looking for a way to open outlook in minimized state with excel commandbutton? seems like all the code for email put the email in outbox,and will not send.
View 5 Replies View RelatedI have managed to create a command button in excel 2007 that performs a macro upon a click. But, after re-opening the workbook, I am unable to right click on the button to recall the properties window.
View 2 Replies View RelatedI am trying to attach a hyperlink to a command button in excel 2003. I open the control toolbox, select command button and place it on the worksheet. with the button selected and in design mode I click on the hyperlink button on the toolbar and allocate the hypelink address. Click on the button and it works fine untill I exit design mode then the button stops working.
View 8 Replies View RelatedI am building a code based on a command button in a row, which will check is a worksheet exists (message), if not create a worksheet from a template (from another worksheet specific to a on a cell value in the same row), rename the worksheet based on a cell value in the same row.
I am having some success for each task with exception to relative cell values .....
As the code will be specific to the row (one button per row) Questions:
how to i determine the location of the button that is clicked? (I assume once this is established i can use to pull values in the same sheet on certain columns....?)
When you click on a command button what would the vba code be to copy the data from the active excel workbook active sheet so that it ends up in the active word document?
I want the values from:
Cell A1 value in Excel to bookmark name "Text1"
Cell A2 value in Excel to bookmark name "Text2"
Cell A3 value in Excel to bookmark name "Text3"
to be copied into the active word document.
I'm using excel 2010. I have a spreadsheet with a row that is hidden. One cell in this row contains a button. I have a macro that copies this hidden row, inserts it at another point on the spreadsheet and unhides it. It works great in excel 2007, but the button on the hidden row disappears when I close the sheet and re-open it.
View 7 Replies View RelatedWe just upgraded to Excel 2007 from Excel 2000 and have run into a challenge relating to labeling a form command button. It appears that the length of text for a command button label has been shortened to 31 characters when setting the name using VBA. No such limitation shows up when I manually create such a button.
Following is the code that used to work to create the button and label in VBA (Excel 2000):
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] .....
If I change the string I want to use for the label to 32 characters, or less, this code works (Excel 2007).
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] ....
I have to admit that this is the last item that I thought would break!
Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
I have a pivot in excel 2007 but I have the following problem; I want to exclude values from one variable that have a value lower than zero or blanks:
Month #AVG Employees
Jan 200
Feb 171
But the problem is, if i filter on the variable by placing it in the Report filter (select multiple items to remove blanks and -999), when i refresh the pivot next time for the new month it won't add the new values for the next month. How to have the filter so it applies the criteria but allowing new values in for the next month.
I have some columns on which I have a filter, with some columns next to those that have information in them.
What I need to do is filter only columns A-F when apply filter values, but keep columns I-K fixed as A-F change when they are filtered..
I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
I am creating a userform in Excel 2007 which requires a user to pick their name from a drop down box then press Ok, what i want to do is disable the Ok button until the user field has been selected.
View 1 Replies View RelatedIs it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedI'm using Excel 2010.
I have a list of 30 words that I am filtering a column of sentences for. If I put the list of 30 in column A and the list of 10,000 sentences in column B, is there a formula that will identify the cells with sentences that contain a word from column A?