Our system, when displaying times adds a space before the time, space05:14:15 - space14:56:39, When I use this formula, =(F292-E292+(F292<E292))*24-0.5, to figure out hours worked, it does not work. If I remove the space, the formula works fine. Is there an easy way to automatically remove the space instead of having to do it manually?
View 11 RepliesI have a set of data in a column and I'm trying to add them but can't because of the way it was imported. Each cell has a number with a space at the end. How do I remove that space without having to manually go in there and deleting via F2 > backspace, F2 > backspace, and so on.
View 3 Replies View RelatedI'm working on a big sheet in which I have values like the following:
Testtest 12345
Test 134691241
Testtestest 2385.234
Test test test 235
Testtest test 14.35172'36
T.E.S.T. test test 31246
What I need, is a formula removing anything after the first space (" ") from the right side, but I cannot seem to figure a way to solve the problem. I tried using SUBSTITUDE, REPLACE, FIND, LEFT, RIGHT, IF, COUNT, LEN formulas,
I have a huge data file that must unfortunately be mandatorily downloaded in a single column format, with coma delimitation for each separate piece of data instead of a space, as follows: 08/04/2009,158,7,1849,1184,824451,403711
What I need to do is put each of the bits of data (coma separating each bit) into a separate column, so that each piece may be further processed. Is there a simple way to do this? Would be happy just pasting the data to a new worksheet, if there was a simple way to remove the coma, create a space between each number, and automatically place each piece of data into a separate column.
I have a file of names that has some undisplayable characters. I am trying to match against a different file. It works if I overtype the "blank" fields with a space. How can remove these trailing problem characters whatever they are? I tried CLEAN and TRIM and the mystery characters are still there.
View 2 Replies View RelatedI am facing problem to delete the blank Space before & after the sentence in excel Cell.I have thousand No. of Rows for which I want to delete the Empty Space before & after the Sentence.May I know how I will do this in quick way.
View 2 Replies View RelatedIs there a way to extend the space of my userform beyond its maximum space? I have tried using vertical scroll bars but they were of no use.
View 1 Replies View RelatedI have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?
I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.
String: Y60
~C CULT NUCLEUS 3X2 SPRING WST BK XL
Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK
I have two words of differing character lengths separated by a space.
How can I remove the first word... essentially, all the charcters to the left of the space AND the space itself?
I have the following formula that works fine until someone uses the space bar to clear a cells contents
=COUNTA($D11:$AI11)
When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?
If find dot. with out space in ( A1 ) cell remove space after dot in cell ( B1 ) Cell, vb or macro
A
B
M V Micunovic
MICUNOVIC,M V
L.T.Kudrjavceva
KUDRJAVCEVA,L. T.
D Sumarac m.l.
M. L,D SUMARAC
I only want to remove one space at the end of my text within a cell, if there is a space.
Code:
Sub hth()
Dim c As Range
For Each c In Range("H1", Range("H" & Rows.Count).End(xlUp))
c.Value = Trim(c.Value)
Next c
End Sub
We have created a macro that basically looks for rows that contain an "H" and hides the row if it does.
Users can add new rows throughtout the year to this spreadsheet. and based on certain criteria, an H or U will be placed in a hidden column which the macro looks at and hides any row it finds an H.
The user has to click on the button that has the macro assigned to it once they have finished working on the spreadsheet.
The problem we're finding is that for users who insert/delete rows, once they click the button it takes up to 15 seconds to run through macro (which is ok). However, users who haven't added or deleted any rows and who click the button, they have to wait upto 5 minutes (which isn't ok) for the macro ro run.
We can't figure out why the macro takes longer to run when no changes have been made?
I have to add up how many A's, S's, ST's and L's I have in a column how do I
do that?
Column 1Column 2
AA
A
AA
STA
AA
AA
AA
A
A
AA
AA
AA
AA
A
LL
AA
AA
A
AA
SS
SS
AA
How to add cells where some of the cells have the value #N/A?
View 9 Replies View RelatedI need to create a Spreadsheet where a certain Value is added to the from of the data I enter into the cell. For example: All of my MAC Addresses start with 00:80:64. I want to be able to just type in the last three entries into the cell and have Excell automatically add the value 00:80:64 So I want to be able to add a specified value to ebvery entry in a collumn.
View 1 Replies View RelatedI want to create a code that adds a check box for each sheet that's added and takes the name of the sheet as the Caption.
View 10 Replies View RelatedI finally got the perfect code that works for me, to list a folder with path name.
if I select any root like C:, D:, E:, an extra backslash is added. can this be fixed that, what ever folder or root drive I select only 1 backslash is added. here is the code
I have a workbook that has a dynamic number of tabs. Every day the report is updated, it will create a tab for yesterday's date. I need to somehow create a summary page that will add the most current tab name (which is yesterday's date) to column B and several cells from row 7 to the appropriate row on the summary page each time I add a new tab. I have attached the spreadsheet in question. I have added manual references to the fields I need to use in the summary on the tab MTD (2) If I am able to get this to work it will replace MTD.
View 8 Replies View RelatedI have attached an excel sheet that takes 2 inputs in cells A2 and A3, sums them in cell A6, and then writes the outputs in cells A9 onward, recording the new sum as changes are made to cells A2 and A3.
Below the last output in the list (Cells A9 to ...) I want to have a Sum of the above outputs. In other words, I want a sum of the previous outputs, and I want it below the final output, moving and recalculating each time another change is made to A2 or A3. How can I do this?
In cell A1 I would like to have a formula that indicates the number of times the word "Yellow Pages" appears in cells C10:C1000. The C column inidicates a referral source. So some of the cells will have "Yellow Pages" and some wont. In cell A1 I would like to have it tell me the total # of referrals from the lead source "Yellow Pages".
View 12 Replies View RelatedColumn A (row 2-15) handle array formula which returns a value when some conditions are met.
Currently:
Rows
A2-A7 shows values
rows 8 to 15 are hidden and returns "" (nothing).
How to unhide next row (8) when value is returned still keeping rows 9-12 hidden.
I've created and excel spreadsheet that has code like this in a Module named Print w/ in the workbook:
Sub Print_wsPrint()
Sheets("Print").PrintOut
End Sub
I have saved it as an MS Office Excel add-in.
I added the add-in to my excel environment via Tools, Add ins...and let it copy it to my C:Documents and SettingsjohnApplication DataMicrosoftAddIns directory.
But yet when I create a menu button and assign the Print_wsPrint to a custom menu, it complains and says "The macro Model.xls!Print_wsPrint cannot be found," where Model.xls is the workbook I am in. It's in my add-in, not in the current wb.
How do I apply a formula to every cell in a given column?
I'd like my workbook to store this formula:
=c<current_row> + d<current_row>
in every cell of column P as a default.
This means that even if I do "insert row", I wouldn't have to copy this formula into the new cell.
I've created a simple budget sheet outlining various group expenses eg: Fixed, Flexible, Variable, and their totals sums.
How can I add all totals while still allowing for a new row to be inserted in any group?
eg:..............Row E
1........Fixed Expense group
2..................$20.00
3..................$40.00
4..................$40.00
5....Total sum $100.00
6.......Flexible Expenses group
7...................$10.00
8...................$20.00
9...................$20.00
10..................$10.00
11..................$50.00
12...Total sum $110.00
13......Variable expenses group
14..................$10.00
15..................$10.00
16..................$10.00
17..................$20.00
18..................$10.00
19....Total sum $60.00
20--------------------
21..Grand Total $270.00
I have 15 files in a folder and need vba code which would open every file from the specified folder and add that file name in the row starting cell "D1" in the "Master File". Below is the code which opens the file from the folder, but need the updated code which will add the opened file name. Also can u pls update this code to not open the "Master file" which is in the same folder when it loops..
VB:
Sub Login_summary()
Dim MyPath As String, FilesInPath As String
Dim MyFiles() As String
Dim Fnum As Long
[Code] ....
I have a workbook to track clients served. The first sheet has all of the data entered into it. The name, age, demographics, services. The second sheet is a template of the individual client's pages, summarizing their information and services received. I want to code the sheet so that once a new client is entered into the table on sheet 1, the template will automatically be copied to the end, renamed, and the basic data for the new client will be pasted into the new sheet.
I've been working on this project and done a ton of googling. And also am very new to VBA. I have found a solution that works:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$2" Then
Sheets(2).Copy After:=Sheets(Sheets.Count)
[Code]....
But I really don't want to do 50 "else" clauses for each line where there could be a new client. So I was thinking, if i could find a way to do a relative reference, such that it selects the cells to copy relative to the one that was changed within the range of that column, then I would only need one "if" statement. Is that possible? Is there some way to change the "B3" in target_address to "any cell in column B" and then range "A3" a few lines down would somehow be "1 cell left of the one changed" and the range "A3:K3" to copy would be "1 left:9 right" of the one changed. I know this may be impossible or just not how VBA language works, but I thought it'd be a lot easier than 50 repititions of if..then...else....
I would like to subtract 9:30 AM From 9:40 Am. I have tried the formula listed and I get, (0.00694444444444442 Mins) ...
View 7 Replies View RelatedSo I have a column, say column A, that I have a auto filter assigned. I would like it to auto-refresh the filter every time I add in data at the end.
I found this macro, but it only works for changes made within the filter, not if I add in data at the end. [URL]
Private Sub Worksheet_Calculate()
If Me.FilterMode = True Then
With Application
.EnableEvents = False
[Code].....
The problem is that when I add dates via macros (like from a userform to a selected cell) to a cell in autofiltered column, the autofilter doesn't recognize these values as "proper" dates. If I activate the formula bar and press Enter, then the autofilter identifies the date properly.
This is how the autofilter popup looks like after I have added a date via my macro: [URL] ....
The new date doesn't get categorized by year and month, instead it just shows as text on a separate line (circled in red) (huhtikuu = April)
I have earlier used Formula:
[Code] ....
How I could get the autofilter working right with the inputed values? I have tried adding the date via .Value and .Formula but neither one works.