I have a workbook that has a dynamic number of tabs. Every day the report is updated, it will create a tab for yesterday's date. I need to somehow create a summary page that will add the most current tab name (which is yesterday's date) to column B and several cells from row 7 to the appropriate row on the summary page each time I add a new tab. I have attached the spreadsheet in question. I have added manual references to the fields I need to use in the summary on the tab MTD (2) If I am able to get this to work it will replace MTD.
I need VBA code to automatically send an email notification when data is added to worksheet. I am not very familiar with writing code and have been using other code from other posts. Ideally I would like it to send an email notification with the added information attached, in this case it would be Row # and Columns A thru O.
I have a workbook to track clients served. The first sheet has all of the data entered into it. The name, age, demographics, services. The second sheet is a template of the individual client's pages, summarizing their information and services received. I want to code the sheet so that once a new client is entered into the table on sheet 1, the template will automatically be copied to the end, renamed, and the basic data for the new client will be pasted into the new sheet.
I've been working on this project and done a ton of googling. And also am very new to VBA. I have found a solution that works:
VB: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$B$2" Then Sheets(2).Copy After:=Sheets(Sheets.Count)
[Code]....
But I really don't want to do 50 "else" clauses for each line where there could be a new client. So I was thinking, if i could find a way to do a relative reference, such that it selects the cells to copy relative to the one that was changed within the range of that column, then I would only need one "if" statement. Is that possible? Is there some way to change the "B3" in target_address to "any cell in column B" and then range "A3" a few lines down would somehow be "1 cell left of the one changed" and the range "A3:K3" to copy would be "1 left:9 right" of the one changed. I know this may be impossible or just not how VBA language works, but I thought it'd be a lot easier than 50 repititions of if..then...else....
I have created a calendar to enter various locations. At present they are set up using VBA and are called from buttons on the calendar. What I want to do is add a button to the worksheet and then edit its text. I will call a subroutine to use the edited text as the name I want in the calendar. What I cannot figure out is how to return the index of the button have just added so i can alter the button text. I appreciate I could cycle through all the shapes on the sheet but as I do not know the number of the one I have just added I cannot work on the correct one. I suppose I could cycle through all of them and use a carrier to count how many there are then add one to get the latest but that seems very crude not mention time consuming as I allready have 504 text boxes on the claendar.
From the sample file, I am using the data on (start) worksheet. (Sort and format sheet) . This one is way over my head. After new data is added to the sheet via another UserForm, I want to sort the list by name and have alternating backgrounds based on grouped unique names.
My company uses two excel workbooks to track campaigns, I'm looking to create a VBA script that can detect when a new worksheet is added to the other workbook when it is activated. To provide a more concrete example:
In workbook one there are worksheets : Apple, Orange, and Pear
In workbook two there are rows Titled: Apple, Orange, and Pear. Each row has formulas that pull from the specific worksheet.
Then a 4th worksheet, Grape, is added to workbook one. I'm aiming to make a script/button which when activated would notice that there is not a corresponding row named Grape and create one.
However, more simply, I could also make this work if I could just create a Script which when activated populated a column in workbook two with all the worksheet names from workbook one.
I was wondering if it is possible to update links from one worksheet to another that contains a running tally - even when another worksheet is added and needs to be linked to the running tally as well?
I have attached a sample workbook. What I have is a summary sheet ( Sum Hrs CMS) that has SUMIF calculations for a series of rows in the Estimate Sheet.
The problem that I have run into is - when you press the Add New Sheet button on the Estimate sheet, it copies hidden sheet and inserts it at the end of the workbook, however I then need the hours in the CMS portion to link to the summary sheet. What I was wondering is how do the links on the 'Sum Hrs CMS' sheet include this new sheet and the data that is entered on it?
Is there a VBA code that will enable me to create a button and assign a certain macro to it everytime I insert a new worksheet?
how to insert a new worksheet with VBA, what I want is that when I insert that worksheet, there is already a button there with a specific macro(already made) assigned to it.
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
I have attached an excel sheet that takes 2 inputs in cells A2 and A3, sums them in cell A6, and then writes the outputs in cells A9 onward, recording the new sum as changes are made to cells A2 and A3.
Below the last output in the list (Cells A9 to ...) I want to have a Sum of the above outputs. In other words, I want a sum of the previous outputs, and I want it below the final output, moving and recalculating each time another change is made to A2 or A3. How can I do this?
I m adding colors in excel sheet where ever ther is value added in the cell and delete the same value of the cell as this sheet i have to change every month end. i have tried this but not working when i want to delete the same Pivot Tables
I have one worksheet in, which I have to show the accumulated amount found in another worksheet within the same workbook where the value added will be accumulated only when the criteria is met. I have enclosed herewith a sample of what I am trying to do since it is long to explain in writing. As the chinese proverb says: "better see once than hearing/reading 1000 of words.
I want to perform a COUNTIF in a column where data is added regularly. The COUNTIF range is to be the last 100 rows of data: so if yesterday that range was a2:a102 then today it should be a3:a103, tomorrow it will be a4:a104 and so on.
How can I get COUNTIF to change the range as new data is added? I can generate a string with the changing range ("a2:a102", "a3:a103", and so on) but how do I put that into COUNTIF?
I have a graph that is showing the date on "Y" axis and a value on "X" axis, when I add a new date and value to my data the graph does not update, it just shows the data when I first created the graph.
How do I get the graph to display the new data I entered ?
I created a line graph by clicking on the "A" in column "A" (Thats where my date is) then clicking on the "B" in column "B" (Thats where my values are) and clicking the create graph button then clicked finished.
I have attached a copy of the chart and data. My chart starts on the bottom. I had to take out a lot of data but beneath the data shown is much more data..
I want my chart to automatically update when new data is added. Here are the issues. I have several lines of headers and below that my data. Then below my data I have other data that I don't want displayed in the chart (its not shown here because of size limitation of attachmnet).
The new row will be added each time right below the header, right above the most recent data given. So a row will be added above row 8!
I have a pivot table I am try to update. The table references another tab where my data sheet exists. If I add data to the datasheet how can I get my pivot table to recognize the additional information.
I am running the below code to basically apply a defined list to a cell containing the string "WORKDAMNIT". This list is used as validation. I am running into a HUGE problem where once I apply the validation on about 17,000 cells and try to save the spreadsheet I get an error saying that "Excel could not save all the data and formatting you recently added to...". Thus, the IF loop basically does a save of records everytime I hit about 1000 records. I can even see the file being saved. However, whenever I close the spreadsheet it asks me to SAVE!! If I try to save it I get the same error and if I dont NOTHING gets saved.
Sub Valid()
Dim listCount As Long 'counter Dim cellCount As Long 'cell Counter for save function Dim foundCell As Range 'found cell in sheet Find Dim foundList As Range 'found cell in sheet list Dim fwb As Workbook 'workbook value Dim fsheet1 As String 'find sheet Dim fsheet2 As String 'list sheet Dim strMatchCol As Integer 'address value of column number Dim col As String 'actual value of column string Dim strFind As String 'The string we are searching for (eg. "blah blah")
Scenario; I have 3rd party software that pulls reports in .csv files. I want to summarise this data into another spread sheet. Ideally I would like to save these files into a folder on the network and my summary workbook simply looks for this folder and is able to find data within all Excel files saved in there (new files will be added on a monthly basis).
Once it has found the folder there will be 2 pieces of data to evaluate; Cell $B$1; this will be the name of a course (e.g. health & safety, money laundering etc.) Column $D; this will contain the score achieved by multiple learners.
The summary spreadsheet then averages all of the scores for the different courses(in seperate cells)
The idea is that the .csv files can be pulled and saved into said folder and eliminates the need to manually input this data into the summary spreadsheet.
This formula calculates the average mailing return rate of all the mailings added together. J15 is currently white text to hide it from the end user.
Everytime I add a new row of data I need the formula to update itself automatically. So for example, the next time I add a row of data the above formula has to change to
"=J15/11"
Or if I were to add three rows of data the formula would have been
I have several ComboBoxes & ListBoxes on a Userform that populate by referring to Dynamic Named Range in the RowSource property. Also on the Userform is an area to edit/add/delete items in these named ranges. If I Add or Delete an item, the Named Range does not automatically resize--or at least the Menus don't "resize" accordingly--unless I unload the UserForm and load it back up. Is there a way to refresh these Comboboxes without reloading the UserForm?
I am trying to do a running total in one column with data added from the columnn before it. But I dont want the last amount in the running total to continue down the page I would like it to be either blank or zero amounts. Also if there is a zero amount in the first column the running total should show the amount previous.
consolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
I want to pull data from my excel file (using VBA) into Ms Word. I created a template in Word and wrote a macro to do this, it worked, however, anytime a new row is inserted or deleted in my excel spreadsheet my macro produces wrong results in my Ms Word template because the cell position has shifted, thereby producing the wrong result. How do i make it that my result remain the same when new row is added to my spreadsheet.
Example: Excel row1: vicky 528 row2: sam 532 row3: john 092 row4: Own 211 word template: 092
This is what happen next:
Excel (New row added) Macro: ThisDocument.ScreenedPatients.Caption = wb.Sheets("CSAs").Cells(16, 1)
row1: pat 542 row2: vicky 528 row3: sam 532 row4: john 092 row5: Own 211 resulting Word template(running macro): word template: 532
But I want John to automatically go on the Word template without going into macro to change it all the time when a new row is added.
I have created an Excel spreadsheet in 2007. When a friend opens the workbook in Excel 2013, It does not let him add data to the cells. ( just one column which is the "date" column) The worksheet is not locked or protected.
When I right-click on the column and goto format cells, protection, the box is ticked, but the note says this doesn't take effect unless the sheet is protected witch it isnt.
I have added three lines above the existing data, and now the print preview doesn't work. Where the range is names as X18 I have added to bump everything down. I get an error in the SetActiveSheet.VPageBreak..... line. I'm sure the issue is with the range, but I'm just not sure what the issue is.
Here's the code:
ActiveWindow.View = xlPageBreakPreview Dim i As Integer With ActiveSheet.PageSetup .PrintTitleRows = "" .PrintTitleColumns = "$A:$Z"
A lot of the Workbooks that I design for use by myself and colleagues require data to be copied in from external data sources. To avoid named ranges from failing, I always use the following method:
Calculate the length of the data set:
Code: =COUNTA(INDIRECT("'Data Sheet'!"&"$A:$A"))
(There will be no gaps in the data, hence a count is fine.) This named range is called DSROWCOUNT.
I use INDIRECT to ensure my named ranges do not fail if the data is deleted (accidentally or intentionally), as #REF! errors will occur.
The problem with this method is that it automatically makes the Workbooks volatile because of the use of OFFSET and INDIRECT, hence the Workbooks always needs to be in manual calculation mode to be usable.
I copy a table from a data dump dbf file into worksheet 1. I enter a separate column titled "Comments" and use this for status purposes. My problem is that when I refresh the worksheet, my comments don't stay attached to the rows/ records that they were originally entered for.
Is there a way to make a chart adjust automatically when you add to the source data? I'm trying to use a named range in order to power a chart (something like chart_data=offset(a1,,, counta(a:a),counta(1:1)); the range is working fine). When I put "chart_data" into the source field for the chart, it seems to work fine; it picks up the right range... But when I later add more data, the chart source data field seems to have converted my named range into a hard-coded range, absolute range. So the dynamical named range updates, but the chart doesn't and I don't see the new data. Am I doing something wrong that I need to tweak? Does what I'm trying to do just not work? Is there another way to make the chart pick up the new data without adjusting the range?
