Renaming Tabs On The WorkSheets
Aug 4, 2007
I mean renaming tabs on the sheets, the tabs at the moment are called Output 1 (*****) instead of Sheet 1 etc.. and i would like that changed to contents in cell A9. If possible only the Output 1 will be removed and it will change to something similar "X-Ray (5E4TT)"
i have a workbook with worksheets named Output 1 (*****)
(the stars being a five digit/letter code - the only thing that changes on the workbook)
now the problem is, i pull of reports and sometimes worksheets can be up to one hundred.. now in cell a9 is the name of the report. I have found vba code to rename sheets to cell contents **extract below**
but any chance of renaming contents of cell a9 to a worksheet named Output 1 (*****) etc.. and if the contents of cell a9 can be trimmed so only certain part of a lengthy title
Sub RenameTabs()
For i = 1 To Sheets.Count
If Worksheets(i).Range("A1").Value <> "" Then
Sheets(i).Name = Worksheets(i).Range("A1").Value
End If
Next
End Sub
View 14 Replies
ADVERTISEMENT
Jan 14, 2008
Is there a way to rename tabs from a seperate list. Or link the Tab name to a list?
View 9 Replies
View Related
Jun 11, 2007
Iīd like to have a single workbook for each calendar year, with a tab for each date Monday through Friday (like 11-Jun, 12-Jun, etc.). I could then type the patients` names and times of arrival, among the other information I track. Alternatively, I could have a workbook for each month of each year (titled for example 2007 June or 2008 August), with the tabs titled by the date of the month (like 1, 4, 10, etc).
Is there an easy way to do this without manually renaming each tab for each day of the year?
If itīs too hard to limit the macro to create tabs for only the days of the workweek, it wouldnīt bother me if the workbook had to include every day of the week (Sunday-Saturday). I can always go back and delete the unnecessary ones.
View 11 Replies
View Related
Dec 13, 2013
In Excel, is it possible to put coding/formula to rename a tab based on a cell value? For example if cell D3 says "America" could "Sheet 2" get automatically renamed to "America"?
View 1 Replies
View Related
Jun 1, 2008
is there any way that i can adjust this code so that if there are not enough worksheets in my workbook to support my list that more worksheets will be made and renamed? Specifically I would like to copy the first worksheet and then rename it based on my list. also... If I have more worksheets than my list requires it can delete unused worksheets?
Sub NameSheets()
Dim i As Long
Dim ws As Worksheet
i = 1
For Each ws In ActiveWorkbook.Worksheets
If ws.Name "Sheet Names" Then ws.Name = Sheets("Sheet Names").Cells(i, 1)
i = i + 1
Next ws
End Sub
I have a list on "Sheet Names" that changes the tab names on each sheet when i run the macro
View 9 Replies
View Related
Mar 21, 2008
Just a quick on i hope. Im trying to create a macro that adds a worksheet/tab and Rename it to the month after the tab already showing.
e.g
if i already have two tabs one dated january and the other named february i require the macro to say march then the next run would be april if you get my drift.
View 6 Replies
View Related
Dec 19, 2008
I would like to rename multiple tabs (12 in all) on a spreadsheet by month only. I highlighted all tabs and then performed a cut and past from the previous year spreadsheet, but when the paste was complete the tab names were missing. I need January through December on the 12 tabs. Does anyone know of a shorter process than renaming each tab individually? I have called several people and asked the same question and they are curious if there is a way to do this also and asked that I let all of the know what I find out, so you would be helping quite a few people in several different companies (If that gives you happy thought, then good for all of us ).
View 9 Replies
View Related
Aug 14, 2009
I would like to create a macro that would bring up an input box or preferably a list box that will allow me to input information for a sheet/tab name where where "TBL NPL NGRPL" appears in the code at the end of this message. The macro needs to be available to any new file created
The only worksheet names needed are below.
TBL NPL NGRPL
TBL NPL NIAU7
TBL NPL NIAU8
TBL NPL NIA10
TBL NPL NNDU4
This is the extent of my ability:
Sub Macro1()
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "TBL NPL NGRPL"
Range("A1").Select
End Sub
I created six macros, but there must be an easier way.
View 9 Replies
View Related
May 18, 2007
I have a workbook with 37 sheets in it. 36 of them are three per month (e.g JanCash, JanWeekly, JanMCR, etc) Since we make updates/ changes to the file throughout the year I cannot reuse the files. Also since we have accounts on different fiscal years, I need a way to rename the sheet tabs from a list. Does anyone know how I can do this with VBA code?
View 2 Replies
View Related
Jul 5, 2007
I am probably just having a stupid moment, however I have a problem
Whats the best way to rename a worksheet using VBA?
I was going to use a count function to count the number of worksheets, then change worksheet (eg) 10, 11 & 12
View 10 Replies
View Related
Apr 13, 2006
I've undertaken a project for work with my very very limited knowledge of Excel VB.
What I am trying to do is automate the process of creating a new worksheet in a "Master" Workbook, rename and save that worksheet with the date it was created.
Each worksheet will hold a list of dates for staff members who have attended or attempted courses for that week and the information will come in via email in separate pre-created worksheet templates. The consolidated weekly data will ultimately end up in an MS Access db (but needs to be sorted and validated before upload).
Here is the code I have so far:
Private Sub AddSheets()
Application. ScreenUpdating = False
Worksheets.Add.Move Before:=Sheets(1)
Worksheets.Visible = True
Dim myDate
myDate = Date
Sheets. Name = Date
End Sub
Using VB6.3 in Excel 2000
View 4 Replies
View Related
Dec 18, 2012
I have a workbook with 70 worksheets and I'd like to rename 65 of them while leaving the first 5 worksheets unchanged.
The following changes all worksheets. Is there anyway to modify so that the name on the first 5 worksheets remain unchanged.
Sub ChangeWorkSheetName()
Dim WS As Worksheet
i = 1
On Error Resume Next
For Each WS In Worksheets
WS.Name = "Cost" & i
i = i + 1
Next
End Sub
View 6 Replies
View Related
Aug 19, 2013
I've currently got a problem with renaming the ActiveSheet when multiple worksheets are present. The code below, utilizes existing fields on the worksheet and a concat with static text. The code works great if only one sheet is present. However, as soon as the second sheet is inserted in the workbook, I'm now receiving a 1004 error (application-defined or object-defined error).
Code:
Private Sub updateWorksheetName_Click()
Dim fNumber
Dim pCheckNumber
[Code].....
View 9 Replies
View Related
Jun 18, 2008
Hope i can get some help here as my vba experience is extremely limited. I'm trying to run a macro from a spreadsheet that will go down a list of file names that i have entered in a worksheet where the macro resides and open those spreadsheets and rename the worksheets in each file according to a list of names that i have entered in the 10 columns next to the file name. It's easier to explain with the layout of my macro spreadsheet: ....
View 9 Replies
View Related
Jan 11, 2013
I'm attempting to add a variable number of worksheets (dependant on the number of entries in an existing list), then rename those sheets to the name of the entries in that list. i.e.
LIST
A
B
C
With the list above, i'd want 3 new sheets added, one named 'A', one named 'B' and one named 'C'.
The trouble i'm having is that because the number of entries/sheets varies, i don't want to refer to 'Sheet1' 'Sheet2' etc. to rename them.
***Additional Info*** the first record in the list is always "W4" on sheet "Data"
Below is where i've got to so far (however, i'm pretty new to this so it's almost certainly not all that efficient!)
Sub setup_1()
Sheets("Data").Select
Range("W4").Select
[Code] .......
View 2 Replies
View Related
Aug 25, 2009
I have a master spread sheet that contains many products which are then grouped into system. Typically, three or four products make up a system but it can be as few as 1 or as many as 6.
The master spread sheet contains all the products. But I would like to be able to create new worksheets where the new worksheet would only contain the tabs of the system.
All the tabs are named as follows: Product #, then system name: Here are examples: (all of the product names will contain the same amount of characters, but the system names will vary in the amount of characters necessary).
B23456 x1 Batter
B45930 x8 Batter
B39080 x5 Batter
B32556 x4 Breader
B39083 x2 Breader
B23049 x4 Predust
G34509 x5 Marinade
G34529 x3 Marinade
G34590 x3 Marinade
Thus, I would want the first 3 in a Worksheet, then Next two in a worksheet, and so on. A bonus would be if the worksheets were all saved with the System name, i.e. batter, breader, predust.
View 9 Replies
View Related
Aug 6, 2007
How do you get a quick report of all of the worksheets in a given file?
Is there functionality in Excel that would provide this? Or a simple macro?
I inherited a file w/ approx. 50 tabs and I'd like to print out the list of all the worksheets so I can create a checklist of tasks I need to do for each worksheet.
View 7 Replies
View Related
Sep 26, 2007
Does anyone know whether it is posible to resize the tabs at the bottom of the worksheets?
I am trying to make them bigger so they are more obvious.
View 7 Replies
View Related
Jul 28, 2014
I have about 30 Excel files, each with multiple tabs. Each file has a tab called "Invoice." I would like to create one workbook with all 30 Invoice tabs. As of not I am manually copying and pasting, which takes a while. There has to be an easier way, and I found this VB script to combine entire workbooks.
Is there any way I can run this and get just that Invoice tab and not all tabs on all files?
Sub GetSheets()
Path = "C:UsersdtDesktopdt kte"
Filename = Dir(Path & "*.xls")
Do While Filename <> ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub
View 3 Replies
View Related
Feb 26, 2008
Basically I inherited a Excel Workbook which has 128 different tabs, unsurprising this is almost impossible to manage.
My requirement is to merge all of the 128 tabs into 1 tab 'Sheet1'.
The macro should keep going even if there are blanks, it should move onto the next tab only when there are over 10 consecutive blanks in Column B.
I have tried searching the forum but nothing seems to cater for the specifics of this case. I would really appreciate some help. I mean really, i am in a mad panic thinking i will have to do 128 tabs manually otherwise.
View 9 Replies
View Related
Apr 28, 2009
the maximum number of tabs/worksheets 1 workbook hold? I am using Excel 2003.
View 9 Replies
View Related
Feb 3, 2013
I have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
View 2 Replies
View Related
Jan 12, 2009
You could use:
If ActiveWorkbook.Sheets.Count < 17 Then
Application.CommandBars("Workbook tabs").ShowPopup
Else
Application.CommandBars("Workbook tabs").Controls("more Sheets...").Execute
End If
The code doesn't do anything on my excel workbook which currently has like 20 workbooks, and it grows daily by like 4 or 5 worksheets.
View 9 Replies
View Related
Sep 22, 2012
I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
View 3 Replies
View Related
Oct 12, 2009
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies
View Related
Feb 16, 2007
I have a macro that copys a worksheet into a new workbook - can anyone tell me the VBA to rename the new tab with a cell reference?
View 9 Replies
View Related
Mar 5, 2014
I am tying to build a macro that contains a function to open a closed workbook, create a new tab, select the tab and then paste data into it before closing the workbook.
In a separate macro I will then want to open the workbook again and compare the last two tabs worth of data, to highlight where old data has been removed.
View 1 Replies
View Related
Apr 29, 2009
I have several tabs in a workbook that need different names depending on what is selected from a drop down menu on one of the sheets - "Staff Details" sheet. Any clever persons out there able to help?
View 11 Replies
View Related
Aug 24, 2009
I have renamed a cell to "final"
Now im trying this:
Range("A3:final-1").Select
But that doesnt work, I want the cell just above final.
And I cant refer to the cell above directly due to some factors.
So how could say final - 1?
View 7 Replies
View Related
Sep 15, 2009
I have forty files in a folder that are generated by a system every day.
The files all have something in common, they all include "V9TEST" in them.
for example:
123asdfV9test.20090915123456
160asdfV9test.20090915124455
I would like to run a script that would rename these files in the folder, taking out the V9test part.
result:
123asdf.20090915123456
160asdf.20090915124455
View 3 Replies
View Related