Renaming Multiple Tabs By Month
Dec 19, 2008
I would like to rename multiple tabs (12 in all) on a spreadsheet by month only. I highlighted all tabs and then performed a cut and past from the previous year spreadsheet, but when the paste was complete the tab names were missing. I need January through December on the 12 tabs. Does anyone know of a shorter process than renaming each tab individually? I have called several people and asked the same question and they are curious if there is a way to do this also and asked that I let all of the know what I find out, so you would be helping quite a few people in several different companies (If that gives you happy thought, then good for all of us ).
View 9 Replies
ADVERTISEMENT
Jan 14, 2008
Is there a way to rename tabs from a seperate list. Or link the Tab name to a list?
View 9 Replies
View Related
Jun 11, 2007
Iīd like to have a single workbook for each calendar year, with a tab for each date Monday through Friday (like 11-Jun, 12-Jun, etc.). I could then type the patients` names and times of arrival, among the other information I track. Alternatively, I could have a workbook for each month of each year (titled for example 2007 June or 2008 August), with the tabs titled by the date of the month (like 1, 4, 10, etc).
Is there an easy way to do this without manually renaming each tab for each day of the year?
If itīs too hard to limit the macro to create tabs for only the days of the workweek, it wouldnīt bother me if the workbook had to include every day of the week (Sunday-Saturday). I can always go back and delete the unnecessary ones.
View 11 Replies
View Related
Aug 4, 2007
I mean renaming tabs on the sheets, the tabs at the moment are called Output 1 (*****) instead of Sheet 1 etc.. and i would like that changed to contents in cell A9. If possible only the Output 1 will be removed and it will change to something similar "X-Ray (5E4TT)"
i have a workbook with worksheets named Output 1 (*****)
(the stars being a five digit/letter code - the only thing that changes on the workbook)
now the problem is, i pull of reports and sometimes worksheets can be up to one hundred.. now in cell a9 is the name of the report. I have found vba code to rename sheets to cell contents **extract below**
but any chance of renaming contents of cell a9 to a worksheet named Output 1 (*****) etc.. and if the contents of cell a9 can be trimmed so only certain part of a lengthy title
Sub RenameTabs()
For i = 1 To Sheets.Count
If Worksheets(i).Range("A1").Value <> "" Then
Sheets(i).Name = Worksheets(i).Range("A1").Value
End If
Next
End Sub
View 14 Replies
View Related
Dec 13, 2013
In Excel, is it possible to put coding/formula to rename a tab based on a cell value? For example if cell D3 says "America" could "Sheet 2" get automatically renamed to "America"?
View 1 Replies
View Related
Jun 1, 2008
is there any way that i can adjust this code so that if there are not enough worksheets in my workbook to support my list that more worksheets will be made and renamed? Specifically I would like to copy the first worksheet and then rename it based on my list. also... If I have more worksheets than my list requires it can delete unused worksheets?
Sub NameSheets()
Dim i As Long
Dim ws As Worksheet
i = 1
For Each ws In ActiveWorkbook.Worksheets
If ws.Name "Sheet Names" Then ws.Name = Sheets("Sheet Names").Cells(i, 1)
i = i + 1
Next ws
End Sub
I have a list on "Sheet Names" that changes the tab names on each sheet when i run the macro
View 9 Replies
View Related
Mar 21, 2008
Just a quick on i hope. Im trying to create a macro that adds a worksheet/tab and Rename it to the month after the tab already showing.
e.g
if i already have two tabs one dated january and the other named february i require the macro to say march then the next run would be april if you get my drift.
View 6 Replies
View Related
Aug 14, 2009
I would like to create a macro that would bring up an input box or preferably a list box that will allow me to input information for a sheet/tab name where where "TBL NPL NGRPL" appears in the code at the end of this message. The macro needs to be available to any new file created
The only worksheet names needed are below.
TBL NPL NGRPL
TBL NPL NIAU7
TBL NPL NIAU8
TBL NPL NIA10
TBL NPL NNDU4
This is the extent of my ability:
Sub Macro1()
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "TBL NPL NGRPL"
Range("A1").Select
End Sub
I created six macros, but there must be an easier way.
View 9 Replies
View Related
May 18, 2007
I have a workbook with 37 sheets in it. 36 of them are three per month (e.g JanCash, JanWeekly, JanMCR, etc) Since we make updates/ changes to the file throughout the year I cannot reuse the files. Also since we have accounts on different fiscal years, I need a way to rename the sheet tabs from a list. Does anyone know how I can do this with VBA code?
View 2 Replies
View Related
Apr 18, 2014
I need to rename a large number of .pdf files. I have a list of the current file names in column A and the desired file names in column B.
Data in excel sheet1:
Current NameDesired Name
AAA-BBB-001.PDFAAA-BBB-001-Description.PDF
AAA-BBB-002.PDFAAA-BBB-002-Description.PDF
AAA-BBB-003.PDFAAA-BBB-003-Description.PDF
AAA-BBB-004.PDFAAA-BBB-004-Description.PDF
AAA-BBB-005.PDFAAA-BBB-005-Description.PDF
I keep them in the destination folder below:
C:UsersmeDesktopA
I prefer to use an excel macro since I can't install any additional software on my work computer.
View 3 Replies
View Related
Aug 19, 2013
I've currently got a problem with renaming the ActiveSheet when multiple worksheets are present. The code below, utilizes existing fields on the worksheet and a concat with static text. The code works great if only one sheet is present. However, as soon as the second sheet is inserted in the workbook, I'm now receiving a 1004 error (application-defined or object-defined error).
Code:
Private Sub updateWorksheetName_Click()
Dim fNumber
Dim pCheckNumber
[Code].....
View 9 Replies
View Related
Mar 7, 2014
I am a teacher who has created a gradebook in Excel. Each class has a student template sheet, individual sheets for each student in the class (maximum 26 students/class) which has the structure of the template and some cell referencing to the template, and a couple of mark-entry sheets and a sheet that shows the progress of all students in the class.
A number of teachers in the school have been using this gradebook and I am constantly looking for ways to make it more user-friendly. Currently, when a new course starts, a teacher opens a blank copy of the file (which has all of the sheets I mentioned above present). To set up a class, the teacher enters the students' names once on the mark entry sheet (called the "Binder Sheet"), and then changes the individual student tabs (right click...rename...) to reflect the names of their students.
I am wondering if there is a way to have the individual sheet tabs (Student 1, Student 2...Student 26) update automatically to match the names that the teacher enters on the Binder Sheet in cells A4:A29.
I would like to be able to embed the update procedure/script into the blank template so that it is user friendly for others.
View 6 Replies
View Related
Jan 9, 2010
Is there a shortcut to rename multiple TextBoxes?
So far I've been renaming each individual TextBox manually. This takes forever...
I have a lot of TextBoxes & hope there is a faster/easier solution.
Example:
TextBox1 --> OtherName1
TextBox2 --> OtherName2
TextBox3 --> OtherName3
TextBox4 --> OtherName4
TextBox5 --> OtherName5
TextBox6 --> OtherName6
TextBox7 --> OtherName7
TextBox8 --> OtherName8
TextBox9 --> OtherName9
TextBox10 --> OtherName10
View 9 Replies
View Related
Mar 28, 2008
I'm a little scared to post what with all the warnings and instructions but here goes.
Each month I have to create a new workbook for entering data daily, the tabs are named
"April 1" "April 2" "April 3" and so forth.
I am looking for a shortcut to adding each sheet manually and renaming each tab after adding in 30-31 sheets.
I have found code for adding and naming in numeric order, weekday, monthly, but need something to add both the name of the month and the day of the month.
View 9 Replies
View Related
Jun 22, 2006
Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
View 14 Replies
View Related
Aug 26, 2009
Excel 2007
My workbook contains 13 tabs - 1,2,3,...12, and Summary
My data starts on line 4 of every sheet but varies in length - so far the longest goes to line 30.
Rows used on all 13 sheet are as follows:
A - contains facility names
B - contains a two or three letter code
C - contains hours
D - contains dollars
E - contains adjusted rate
On the Summary tab I have listed all the facilites and two or three letter codes. I need to sum column "C" on tabs 1-12 when they match columns A & B on the summary tab. I have tried the following but can't get them to work:
=IF($A5=""," ",SUMPRODUCT(--('1:[12]12'!A$4:$A$50=$A5),--('1:[12]12'!B$4:$B$50=$B5),'1:12'!D$4:$D$50))
I did not put the [12] excel added that automatically I had 1:12
=SUMPRODUCT(--(THREED('1:12'!$A$4:$A$50)=A10)*(THREED('1:12'!$B$4:$B$50)=B10),(THREED('1:12'!C4:C50)))
I just seen the THREED for the first time today and am not sure if this was the correct place to try but it didn't work anyway
View 9 Replies
View Related
Dec 22, 2008
I have 3 sheets in the same workbook that I want to print in 1 PDF report, is there a way that I can do this?
View 2 Replies
View Related
Nov 29, 2009
I have an Excel file with 70+ tabs and was wondering if there was some way to group them together, short of just making separate worksheets.
View 6 Replies
View Related
Feb 22, 2010
I am looking for a macro or a formula that can give me multiple tabs, what i need is jan 01 to april 30,the next 2 books i could do by copying of course i have looked at the macros on here and no nothing about them ....
View 14 Replies
View Related
Mar 13, 2012
I would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub
View 2 Replies
View Related
May 21, 2012
How can I sumif over multiple tabs?? Without using sumif(a:a,sheet1!a1,c:c)+sumif(a:a,sheet2!a1,c:c)
Like sumif(sheet1:sheet2!a:a,a1,sheet1:sheet2!c:c) I do not want to use a macro. I have about 80 sheets.
Sheet1
Apples 93
Pears 49
Oranges 20
Bananas 35
Sheet2
Apples 100
Pears 13
Oranges 2
Bananas 350
View 8 Replies
View Related
Dec 3, 2012
How can I do
=AVERAGEIF(AZ6:AZ1721,">0",AZ6:AZ1721)
But across 18 tabs all with the same ranges???
View 3 Replies
View Related
Feb 26, 2013
I trying to use the formula below to add values across multiple tabs but I am getting a value error. I think it is just a small punctuation thing.
=SUM(INDIRECT("'"&REF!$A$2:$A$3&"'!&$F$62"))
REF is the name of my references tab and has a list of the tab names
View 1 Replies
View Related
May 13, 2014
I have one tab for every month of the year plus a pivot table and summary page. Each month has 100+ products produced. In any given month the products could change, so a product could be on multiple sheets. I have used the pivot table to eliminate duplicates and create my summary sheet. Now I am trying to lookup the product description across the tabs using and if(isna(vlookup, but this does not seem to be able to handle more than a few tabs at once.
The second problem is I need to add the the production from each month for all the products produced in a year to the summary tab. I do not think the sumif function works here (or I am doing it wrong). I thought about an if(isna(vlookup +if(isna(vlookup and so on but do not think that will work either.
View 9 Replies
View Related
Apr 4, 2009
Could you help with an onerous task that I must complete every Quarter.
I have a spreadsheet with multiple tabs.
The first 3 Tabs are Calculation sheets and do not need to be re-named.
All the preceeding sheets each need to be renamed to the days of the month (British Format), skiping Sundays.
i.e Tab 4 should be renamed 010409, Tab 5 should be renamed 020409, Tab 6 should be renamed 030409, Tab 7 should be renamed 040409, Tab 8 should be renamed 060409 and Tab 9 should be renamed 070409 etc etc ...
Extra - Also if possible on each sheet could the Tab date be placed into Cell A4 (eg. 010409) and also the Day number (eg. 01) (Starting from 01 on 010409, 02 on 020409, 03 on 030409, 04 on 040409, 05 on 060409, 06 on 070409 etc etc ...) into Cell A6.
View 6 Replies
View Related
Aug 21, 2009
I am using this for my sheet =VLOOKUP(B1,master!$A$1:$C$45870,2,0)
I have added a tab "masterA" with 47K lines and a tab "masterB" with 38k lines.
How do I get excell to start with master--if it does not find it there - go to masterA --and if needed go to masterB? ( checking in that order )
View 9 Replies
View Related
May 21, 2007
I have imported a table from my access database. sadly, it has over 65536 rows. I am going to have to break table down into mulitiple sheets on excel. Using a VLOOKUP formula normaly like this. =VLOOKUP(E5,MHIFUPK,5,0)
where E5 is my target,MHIFUPK is the sheet with the table array, and 5 is the price of E5. Now I will have multipe sheets, and I need to be able to refreance all of them in order to find E5. Anyway to do this besides upgrading to 2007, (wish I could get the company to upgrade)
View 2 Replies
View Related
Mar 8, 2013
I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.
Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:
VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False
View 1 Replies
View Related
May 19, 2008
We have these worksheets that have 100 tabs each
each tab is named joel_1400, joel_1401...Joel_1499 insert data in each tab template as needed for RFI's. then we have to make another worksheet with 100 tabs for 1500 to 1599
what we are doing is copying the whole worksheet and then erasing all of the user fields and changing all of the names manually for each tab
View 14 Replies
View Related
May 6, 2009
I have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.
View 6 Replies
View Related
