Just a quick on i hope. Im trying to create a macro that adds a worksheet/tab and Rename it to the month after the tab already showing.
e.g
if i already have two tabs one dated january and the other named february i require the macro to say march then the next run would be april if you get my drift.
is there any way that i can adjust this code so that if there are not enough worksheets in my workbook to support my list that more worksheets will be made and renamed? Specifically I would like to copy the first worksheet and then rename it based on my list. also... If I have more worksheets than my list requires it can delete unused worksheets?
Sub NameSheets()
Dim i As Long
Dim ws As Worksheet
i = 1
For Each ws In ActiveWorkbook.Worksheets
If ws.Name "Sheet Names" Then ws.Name = Sheets("Sheet Names").Cells(i, 1)
i = i + 1
Next ws
End Sub
I have a list on "Sheet Names" that changes the tab names on each sheet when i run the macro
I would like to create a macro that would bring up an input box or preferably a list box that will allow me to input information for a sheet/tab name where where "TBL NPL NGRPL" appears in the code at the end of this message. The macro needs to be available to any new file created
The only worksheet names needed are below.
TBL NPL NGRPL
TBL NPL NIAU7
TBL NPL NIAU8
TBL NPL NIA10
TBL NPL NNDU4
This is the extent of my ability:
Sub Macro1()
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "TBL NPL NGRPL"
Range("A1").Select
End Sub
I created six macros, but there must be an easier way.
Is there a way to rename tabs from a seperate list. Or link the Tab name to a list?
View 9 Replies View RelatedI'm relatively new to VBA and require programming help with the following:
I have created a button to add a specific worksheet template ("TE - Template") after another worksheet ("CO - Cockpit") and then name it:
Sub Add_worksheet()
Sheets("TE - Template").Select
Sheets("TE - Template").Copy After:=Sheets("CO - Cockpit")
ActiveSheet.Name = "AL - Class 1"
End Sub
However, I would like to let Excel check (via VBA) if the "AL - Class 1" worksheet already exists. If it does, the same template sheet should be added but named differently: "AL - Class 2". This should be possible for X worksheets (i.e., "AL - Class (X + 1)" everytime I add a new template worksheet. Thus, I would like to keep the same name (i.e., "AL - Class"), but with an increasing number (i.e., 1, 2, 3, X).
how I should amend the above code or supply me with a better (and efficient) way of programming this query?
I´d like to have a single workbook for each calendar year, with a tab for each date Monday through Friday (like 11-Jun, 12-Jun, etc.). I could then type the patients` names and times of arrival, among the other information I track. Alternatively, I could have a workbook for each month of each year (titled for example 2007 June or 2008 August), with the tabs titled by the date of the month (like 1, 4, 10, etc).
Is there an easy way to do this without manually renaming each tab for each day of the year?
If it´s too hard to limit the macro to create tabs for only the days of the workweek, it wouldn´t bother me if the workbook had to include every day of the week (Sunday-Saturday). I can always go back and delete the unnecessary ones.
I mean renaming tabs on the sheets, the tabs at the moment are called Output 1 (*****) instead of Sheet 1 etc.. and i would like that changed to contents in cell A9. If possible only the Output 1 will be removed and it will change to something similar "X-Ray (5E4TT)"
i have a workbook with worksheets named Output 1 (*****)
(the stars being a five digit/letter code - the only thing that changes on the workbook)
now the problem is, i pull of reports and sometimes worksheets can be up to one hundred.. now in cell a9 is the name of the report. I have found vba code to rename sheets to cell contents **extract below**
but any chance of renaming contents of cell a9 to a worksheet named Output 1 (*****) etc.. and if the contents of cell a9 can be trimmed so only certain part of a lengthy title
Sub RenameTabs()
For i = 1 To Sheets.Count
If Worksheets(i).Range("A1").Value <> "" Then
Sheets(i).Name = Worksheets(i).Range("A1").Value
End If
Next
End Sub
In Excel, is it possible to put coding/formula to rename a tab based on a cell value? For example if cell D3 says "America" could "Sheet 2" get automatically renamed to "America"?
View 1 Replies View RelatedI would like to rename multiple tabs (12 in all) on a spreadsheet by month only. I highlighted all tabs and then performed a cut and past from the previous year spreadsheet, but when the paste was complete the tab names were missing. I need January through December on the 12 tabs. Does anyone know of a shorter process than renaming each tab individually? I have called several people and asked the same question and they are curious if there is a way to do this also and asked that I let all of the know what I find out, so you would be helping quite a few people in several different companies (If that gives you happy thought, then good for all of us ).
View 9 Replies View RelatedI have a workbook with 37 sheets in it. 36 of them are three per month (e.g JanCash, JanWeekly, JanMCR, etc) Since we make updates/ changes to the file throughout the year I cannot reuse the files. Also since we have accounts on different fiscal years, I need a way to rename the sheet tabs from a list. Does anyone know how I can do this with VBA code?
View 2 Replies View RelatedQuick way of inserting the same rows into the bottom row of different tabs, the difficultly comes as the bottom row of the other tabs varies. I.e tab 2 the bottom row is row 87, tab 3 the bottom row is 53 etc.
View 1 Replies View RelatedI have a VBA Code which executes SSIS Package. Before executing that package i need to open the excel sheet saved in C:SSISPackages and rename sheet "SSISP"and then close the sheet..It will not be sheet1 but someother names(cannot guess)..
View 6 Replies View RelatedNow iam Working in excel 2003, I got a Requirement that, After Downloading datas From SAP, It Directly Stored in Excel Sheet , Using tht Sheet1, I need to rename all the Filenames at a time, Is It possible, Any code is there to rename,
For Example,
From SAP to Excel Sheet Datas are Like this in Sheet1,
DmsNo Filename
50007685 SDFFG.jpg
50004678 HGJKID.jpg
50003421 VGFTHR.jpg
Then i have rename that filename, rename 'SDFFG.jpg' To '50007685.jpg', and it Should be directly rename to my Source File.
For Example:
Source File: C: estSDFFG.jpg
After renaming it Should be,
Source File: C: est50007685.jpg
any code is there to rename,
I have a short excel sheet where different departments have to input some data.
I am kind of new in VBA programming, so I mainly copy pieces of written macros and paste them together.
I have a "save as" macro so that we have a standard/sequential file name: ....
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
View 2 Replies View RelatedI'm wanting to add a button on the last row of a worksheet to "add rows" above the buttion (entire row). I have some cells (6 total) that have a formula that needs to carry over to the newly created rows. Some cells remain blank but some cells need to have the formulas fill down to the new rows (i.e.: =sum(a2+1), =sum(a3+1)...
Is it possible to give option of choosing how many rows someone wants to insert?
Help in creating the button, option to choose # of rows and the macro to insert those rows.
Is it possible to insert for example Private sub Workbook_open() into This workbook by executing macro?
View 8 Replies View RelatedI have recorded a basic macro that allows me to copy a formulas in cells CF11 to CH11, and it pastes it into cells in columns CJ to CL. Copy of code is below if you need it.
The issue I have is that I need to insert new coumns into the worksheet, and I need to copy the formulas from columns CF to CH, and they will now need to pasted to columns CN to CP. Note that this is a monthly report where we keep the prior months, so each month will need to add new columns. There are 8 tabs in the workbook, and they all use the same macro, just over different rows (columns all line up).
Is there a way that I can get the macro to paste into the correct column without me having to adjust the macro each time?
Copy of code is as follows:
Range("CF11:CH11").Select
Selection.Copy
Range("CJ11").Select
Selection.PasteSpecial Paste:=xlPasteFormulas, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Range("CJ20:CL20").Select
Selection.PasteSpecial Paste:=xlPasteFormulas, Operation:=xlNone, _
[code].....
simple little procedure to insert columns on two sheets and call each by the same name. Macro runs off a command button and inserts a column at E:E and gives the user an input box with which to name the inserted columns.
Code: ...
I need to insert a new row, in a spreadsheet, after every ninth row that now exists. How is this easiest done?
View 3 Replies View RelatedHow can i make a macro that inserts todays date, tomorrows date, the next day and the day after that??
View 2 Replies View RelatedI'm desperatl seeking help as im trying to get the following macro to run on all available tabs in my workbook.
Sub Scroll()
Application.GoTo Reference:=Range("A1"), _
Scroll:=True
End Sub
I've tried this script but it does not seem to work
Sub Test()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
ws.Application.GoTo Reference:=Range("A1"), _
Scroll:=True
Next ws
End Sub
see the attachment. You will see that I have recorded two macros:
1) To insert a new row for new people.
2) To insert a row for new animals.
With regards to 1), I would like to create a macro that copies the contents of the row with the penultimate name in the people section, and for a new row to be inserted beneath the copied cell. Similarly, with regards to 2) I would like to create a macro that copies the contents of the row with the penultimate name in the animal section, and for a new row to be inserted beneath the copied cell.
The issue that I have is that the macros do not copy the penultimate cell in each section, but copy a particular row, say row 11 each time I want to insert a new animal. So if I had inserted numerous new rows for the people section, and subsequently wanted to insert a new row for the animal section, I press “crtl+sht+a” which copies the contents of row 11 and which is not the contents of the penultimate row for the animal section.
I have two sections to this spreadsheet: 1) the entity section; 2) the order section.
I have created a macro to insert rows in both these sections. The macro appears to work fine for the first section but not for the second section. The problem I cannot solve is in respect of cells D9:D10. The macro is as follows:
I'm trying to write a macro that inserts multiple rows by giving user a MsgBox to enter the # of desired rows. Meanwhile, I need to make sure that the formulas in certain cells are filled down (not just copied from cell directly above). I put something together but it's only adding a single row. Attached is my sample workbook.
View 2 Replies View RelatedI am trying to create a macro that will create a comma and space between every 5th character within a cell. that would be preference #1. What I decided to go with for now, instead, is to try (using the macro recorder) text to columns, fixed width, and do this after every 5th character, and selecting each cell to be formatted as text.
What I am having difficulties with is trying to tell the macro which cells to touch and which ones not to. I do not want the macro to do text to columns and fixed width on simple text. I only want it to do the macro when it is a string of numbers that, during transfer from PDF to excel, have been concatenated into one cell. I also want the macro to do this for infinite number of rows. I have excel 2007.
I am attaching a small excel file with examples of data I am working with. I have saved this excel file as a 97-2003 version for those who do not have 2007. As I stated, if anybody can help me figure out how to do a simple insert comma space every 5th character where information has been concatenated, that would be preference. Also, I am not trying to change anything within column A. Only column B. On the sample file please note B3 - B6. Rows 5 & 6 are fine as they are. Other problem rows include B11 - B13
I would like to create a macro that will automatically insert a page break based on the contents of the cell.
A1:A4 = has value
A5 = BLANK
A6:A14 = has value
A15 = BLANK
and so on....
I would like to put a page break in A5 and A15....and for those cells that are blanks.
I have a bit of code which performs correctly but it ONLY works if it is pasted into the worksheet using VBA. I currently have to manually copy/paste it before it will work and I am needing a macro to handle inserting this for me.
how to get a macro to copy/paste into Sheet1 under the VBAProjects heading?
I have a VBA macro I recorded that won't insert and copy columns into the proper areas. When I run this, It inserts every column all grouped together.
For example: I want to insert a column before column D, and give certain cells formulas. Instead, it inserts it before column C. The whole macro seems to, when ran, insert EVERYTHING before the range of data I am trying to split up.
Here is the
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 6/30/2008 by kmayfield
'
'
Range("C3:F3").Select
ActiveCell.FormulaR1C1 = "Jan-2008"
Range("G3:J3").Select
ActiveCell.FormulaR1C1 = "Feb-2008"
Range("K3:N3").Select
ActiveCell.FormulaR1C1 = "Mar-2008"
Range("O3:R3").Select
ActiveCell.FormulaR1C1 = "Apr-2008"
Range("S3:V3").Select
ActiveCell.FormulaR1C1 = "May-2008"
Range("W3:Z3").Select
I had a macro that worked perfectly by inserting pictures into named ranges throughout the sheet depending on user input. However when I switched to Microsoft Excel 2007, the pictures all go into one cell.
My code looks like this:
Application.ScreenUpdating = False
Dim picnme As String
Dim rng As Range
Dim ArrImg
Set rng = Range("B5")
picnme = Range("B5")
picnme = Range("B5")
Range("B5").Select
ActiveSheet.Pictures.Insert( _
"C:ArchivePictures" & picnme & ".jpg").Select
Selection.ShapeRange.ScaleWidth 1.1, msoFalse, msoScaleFromTopLeft
Selection.ShapeRange.ScaleHeight 1.1, msoFalse, msoScaleFromTopLeft
Selection.ShapeRange.IncrementTop 1.5
Selection.ShapeRange.ScaleWidth 0.84, msoFalse, msoScaleFromTopLeft
Selection.ShapeRange.ScaleHeight 0.95, msoFalse, msoScaleFromTopLeft
I only copied in a section of it bit it gets rather repetitive. There are over 50 pictures that get inserted into the spreadsheet and it worked fine in the prior version of excel.