Resize Userform To Fit Screen?
Jul 20, 2013
stretch" the userform to fit the height and width fo the screen. I dont want to simply change the height and width of the userform, i want the controls within the userform to stretch with the userform so that it looks the same, just fullscreen. this is what ive found by googling:
VB:
With Application
.WindowState = xlMaximized
Zoom = Int(.Width / Me.Width * 100)
Width = .Width
Height = .Height
End With
however, this just stretches it to match the width of my screen, but doestn consider the height, so that if i have a widescreen vs a square screen it will cut off the bottom of my userform. It would be great if there was a zoom type featur that zooms the vertical and horizontal dimensions seperately... more like a stretch than a zoom.
View 2 Replies
ADVERTISEMENT
Nov 23, 2006
open the attachment & click the button. I'd like you to please help me in reducing both the height & width of the picture. So that when the button is clicked the pic. overall size will appear smaller.
View 9 Replies
View Related
Aug 4, 2009
I have a UserForm that I want to use as a Password screen
The form has a label, CommandButton and TextBox.
When I run the UserForm, IF you click OK without entering the Password, you still gain access to the Workbook!
IF you type in the wrong Password you still gain access to the Workbook and NO "Invalid password!" message pops up.
What I would like to happen IF the CommandButton is clicked without entering the Password, is for the Workbook to close, and IF the Password is correct, I want to load Useform2
I am using the following code provided by rorya, that I got from here.....
http://www.mrexcel.com/forum/showthr...light=password
[CODE]
Option Explicit
Private Sub CommandButton1_Click()
Me.Hide
End Sub
Private Sub UserForm_Initialize()
Me.TextBox1.PasswordChar = "*"
End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
Me.Hide
End Sub
Sub Mycode()
Dim frm As UserForm3
Set frm = New UserForm3
frm.Show
If frm.TextBox1.Text = "Password" Then
' run your code
Else
MsgBox "Invalid password!"
End If
Unload frm
End Sub
[CODE]
View 9 Replies
View Related
Nov 2, 2006
if its possible to have the VBA object on one screen and the VBA code on another?
I can have the spreadsheet on one and the editor on another but carnt get it to work with the objects and code.
View 5 Replies
View Related
Sep 4, 2007
is there a way i can make my user form in full screen? i already drag it to it's full screen but i still can see the blue tool bar with X (close) button i also want to run the macro when i open the file i want it to run automatically with full screen....
View 7 Replies
View Related
Sep 25, 2007
I'm having trouble centering my UserForms on the screen. I have tried all the options on the StartUpPosition in the Properties windows and the closest I can get is vertically centered but on the far left. The annoying thing is that it was working (both vertically and horizontally centered) but when I changed the defaults of the option buttons they moved to the position I described. I have two monitors (but excel is maximised on one monitor only) could this have something to do with my problem? If so why did it work before?
View 6 Replies
View Related
Oct 8, 2007
I currently have a VB macro written where under certain conditions user forms are shown for the user to select options, display messages, etc. When any of these forms are on the screen, and someone drags them, the menu image is 'dragged' across the screen. Is there a way from preventing this from happening?
View 14 Replies
View Related
Apr 5, 2010
Is there any way to tell a userform to always open in the center of the excel screen? It always seems to open somewhere in outer space on multiple screen setups.
View 9 Replies
View Related
Sep 4, 2006
Some time ago (not sure how long ago) I created a splash screen that comes up when I first load a particular workbook. There was only one worksheet in the workbook and at that time the data in the worksheet was not so relevant and hardly ever used. That workbook name is "Employees" and the worksheet name is "EmpData".
Subsequently, the worksheet ("EmpData") in the workbook "Employees" has became relevant to a new workbook named "Payroll" I created. This workbook is used all the time. It had four different active worksheets.
I realized last week that the data in "EmpData" was very relevant to the work in the "Payroll" workbook so I copied "EmpData" worksheet in it's entirety to the "Payroll" workbook as a fifth worksheet using the same name as before, "EmpData". Now each time I open the "payroll" workbook the splash screen shows up and hangs around for several seconds or longer. It has become quite irritating and I want to delete it.
View 3 Replies
View Related
Mar 20, 2008
I'm launching a main form from a menu I've added. I want to make the form modal. From that form, the user can launch several other forms (that I also want to be modal). If any of the forms are modal, then the Excel sheet that is visible in the background does not refresh. If the form is moved at all it creates a dragging pattern on the screen and hides the spreadsheet. That's not so bad, except when I get to either a second or third level form and start closing them. They're still visible even though the previous level form is now on top. Most of the forms get bigger the deeper you go into the data entry process. So, as you close them and move back up the chain, it gets very confusing. If I simply make the forms modeless, it refreshes fine. I've tried using Application. ScreenUpdating = True and Me.Repaint with no success. I couldn't figure out where to put the Me.Repaint since there isn't a UserForm_Move event.
View 2 Replies
View Related
Dec 29, 2009
I'm just looking to prevent users from using the print screen or the alt print screen buttons on the keyboard. I have this script that works if I use "39" (Right Arrow)but wont work if I use "42" (Print Screen Button).
View 5 Replies
View Related
Jun 20, 2006
Is there a way to resize the name box, the box directly to the left of the formula bar?
View 2 Replies
View Related
May 9, 2007
I am trying to write a code to resize every second row between the range of A5 and A500 (Starting at A5) to 12.75 but am unable to find a simple loop to do this.
View 3 Replies
View Related
Feb 21, 2014
I trying to out together a small script which performs the following:
-Select cell B7 and offset this by 12 columns and one row
-Resize this by 14 columns, then
-Apply the font format to the selected range from the first to the last row
The code below is what I've put together so far, and although this runs without issue, it's not applying the formatting.
[Code] .......
View 14 Replies
View Related
Jan 11, 2010
I have 3 workbooks, the first one contains the data and the second is the “Table1” containing "Normal records" and the third is the “Table 2” containing only "900 Records". Tables 1 and 2 will be linked to Access…..
Here’s my issue….
From workbook 1, I would like to copy data from certain cells that contain data to Table 1
From workbook 1, I would like to copy data from certain cells that contain 900 service records data to Table 2
In workbook 1, I have identified which information i want to keep by using the following formula,
View 14 Replies
View Related
Sep 8, 2007
I have the following
Cells(c,r) = Range("fa:" & "fa.Offset(0,5)").value
Fa is a code that searches, once it's found something, it then puts that one cell.value into Cells(c,r). it then moves on until the next cell found with the required contence. I need it to put that one cell, and the next 4 columns along side it starting in Cells(r.c)
The problem is, I keep getting a global error. I am sure I have done something like this before, but cannot find it, or remember how i did it.
View 6 Replies
View Related
Jun 6, 2014
I need to make rows expand to fit the largest text box within that row. I found the code below online, it works perfectly on the spreadsheet it came on but it doesn't work on my spreadsheet.
Dim cr As Range
Dim ht As Single
Dim mht As Variant
Dim cn As Integer
[Code]....
View 6 Replies
View Related
May 1, 2014
I would like to scale an image to 124% how do I do that
View 1 Replies
View Related
Oct 18, 2008
1.My macro code to insert picture from C:pictures to worksheet in colum B,but the insert pictue are very big. how can it is automatic resize with autofit in the height of the column B when i click the insert button.
2.I need some code for the delete button. if I need to delete some picture,when the delete button is clicked , the input box prompt for key in the picture name to delete. if i key in the pictue name , eg.pictue2 , so the name of pictue2 in the column A and the pictue2 in the column B is deleted.
View 2 Replies
View Related
Apr 29, 2009
Range.Resize to an entire row? I have a range variable:
View 2 Replies
View Related
Sep 9, 2009
i m sending image files via EMail attachment with VBA code. Though the images are 5Mb+ each and when sending 20+ on a 128k upload connection that takes a while. Is there a way that the images can be resized through vba and saved as a new folder. Or send the images to another program and pause the code until the resizing has been done.
View 3 Replies
View Related
Oct 14, 2009
I am trying to print a range that falls just outside of a normal A4 size. Is there a way of scaling this range to fit the page. Withough changing the column sizes before printing(each column is diffrent size). Or will i need to load the column sizes into a array and resize for the print then back to original size from array.
View 2 Replies
View Related
Oct 20, 2005
Macro to CHANGE number of rows “3” to a variable range
(end.xlDown) on the macro below.
Sub GotToRangeResizeCopyPaste()
Application.Goto Reference:="MyRange"
ActiveCell.Resize(3, 10).Select
Selection.Copy
Range("OtherRange").Select
ActiveSheet.Paste
End Sub
View 11 Replies
View Related
Mar 13, 2012
I want to resize a formula array but I am not able to do it.
Here is my code so far :
Thisworkbook.Sheets(2).Cells(3, 1).Resize(lastrowsource - 2, 1).FormulaArray "=IFERROR(INDEX('Sheet1'!$c$1:$c$999999,MATCH(b3&d3,$A$1:$A$999999&B$1:$B$999999,0),1),""Not found!"")"
View 9 Replies
View Related
Mar 25, 2012
I'm trying to resize the data labels in my chart so that the word Institutional appears on 1 line (It's currently on 2 lines) like the pic below:
but clicking the corners of the data label and dragging it does not work for me. I click on the corners and nothing happens. How I can make the data labels bigger without getting the text cut off to the next line?
View 2 Replies
View Related
Feb 7, 2010
Before I will hand in my proposal I have to check if my ideas are achieveable in excel. To keep it simple, the idea is to use different moving averages and the Min/Max(t-1, t-n).
For example, a buy signal is given when a fast MA crosses the slow MA from below. Or a buy-signal is given when the price on t is greater than MAX(t-1:t-n). Due to the scientific aspect I have to analyse a lot of variations of these moving averages and breakouts.
My question: How can I change the range of a formula with an other cell.
For example: Range: B1=20
MAX(A1:A20)
MAX(A2:A21)
How can I program it such that when I change the value in A1, the range of the formula will change with that value?
View 9 Replies
View Related
Nov 5, 2008
I have to refer to a named range in a macro, but in the beginning I don't know what size it will be. So, in the beginning myRange will always consist of a single cell, which later on will be the 1st cell of the correctly sized range. While the macro runs, the correct size of the range is calculated, and at that point the range has to be resized, say to 'n' rows by 'm' columns, with the original cell as 1st cell.
View 3 Replies
View Related
Sep 19, 2006
I use comments to supply various detail information on the value in the cell. This might take 10-12 lines of comments, but only the first five appear when you hover over the cell. In order to see the entire comment you have to right click and edit then manually resize.
Any tips on how to resize at the time the comment is loaded so no manual intervention is required?
View 4 Replies
View Related
Mar 28, 2007
I have a listbox filled automatically from some cells. I have to choose an item from this listbox, click a button, and then my macro will summarize some data. All it´s running, but a little problem, the size of the listbox is changing itself after some actions. For example, when i change the value of the cells from where i fill this listbox.
View 2 Replies
View Related
Jul 1, 2014
i have a dynamic pivot chart. It works well, except the chart area size, it remains the same. Is there any way how the chart area can be automatically adjusted/resized (see the example attached)? Maybe with VBA?
View 8 Replies
View Related
