Range.Resize To An Entire Row?
Apr 29, 2009Range.Resize to an entire row? I have a range variable:
View 2 Replies
ADVERTISEMENT
Automatically Resize Entire Workbook
Jan 6, 2009I have a 40+ page workbook that I'm working and I need to print every sheet in the workbook on legal size paper, and each sheet can not be > one legal piece of paper
The macro will cycle thru all the sheets in the workbook, yet it will only adjust the current active sheet. I highlighted where I think my error is in red....
Resize A Range
Sep 8, 2007I have the following
Cells(c,r) = Range("fa:" & "fa.Offset(0,5)").value
Fa is a code that searches, once it's found something, it then puts that one cell.value into Cells(c,r). it then moves on until the next cell found with the required contence. I need it to put that one cell, and the next 4 columns along side it starting in Cells(r.c)
The problem is, I keep getting a global error. I am sure I have done something like this before, but cannot find it, or remember how i did it.
Resize Print Range To Fit A 4
Oct 14, 2009I am trying to print a range that falls just outside of a normal A4 size. Is there a way of scaling this range to fit the page. Withough changing the column sizes before printing(each column is diffrent size). Or will i need to load the column sizes into a array and resize for the print then back to original size from array.
View 2 Replies View RelatedResize Range - Macro
Oct 20, 2005Macro to CHANGE number of rows “3” to a variable range
(end.xlDown) on the macro below.
Sub GotToRangeResizeCopyPaste()
Application.Goto Reference:="MyRange"
ActiveCell.Resize(3, 10).Select
Selection.Copy
Range("OtherRange").Select
ActiveSheet.Paste
End Sub
Resize The Range Of A Formula
Feb 7, 2010Before I will hand in my proposal I have to check if my ideas are achieveable in excel. To keep it simple, the idea is to use different moving averages and the Min/Max(t-1, t-n).
For example, a buy signal is given when a fast MA crosses the slow MA from below. Or a buy-signal is given when the price on t is greater than MAX(t-1:t-n). Due to the scientific aspect I have to analyse a lot of variations of these moving averages and breakouts.
My question: How can I change the range of a formula with an other cell.
For example: Range: B1=20
MAX(A1:A20)
MAX(A2:A21)
How can I program it such that when I change the value in A1, the range of the formula will change with that value?
Resize From Active Cell To Range?
Sep 27, 2009how can I resize a from my active cell to a specific cell (eg. L1) and select all the cells in between? I am using this code to select the last cell after my data (active cell is in column A).
View 2 Replies View RelatedError W/Code To Resize Named Range
May 14, 2009If I omit the column arguement in resize I get error.
Dim ii As Range
EndRow = MyPL.Range("c" & Rows.Count).End(xlUp).Row
Set ii = Range("Data")
q = (EndRow - ii.Rows.Count)
Names("Data").RefersTo = "=" & ii.Resize(ii.rows.count+q, ).address
End Sub
Resize Named Range Lists Simultaneously
Dec 21, 2007There are 4 lists containing accounting data and within each list the data rows beneath the headers are named ranges.
The parent input list is on the Payments worksheet with headings in A3:R3 and the data rows underneath are a named range entitled Payments.
The child lists contain formulas to pull the required information from the parent Payments list. These lists are identically sized and headed with headers in A1:K1. The data rows underneath the headings are named ranges entited Debits, Credits and VAT. The worksheets on which each resides have the same names.
I am looking for a way to automatically contract / expand the child lists as each row is added / deleted from the parent Payments list, ie so each list always contains the same number of rows.
The formulas already within the child lists will then ensure that the apprpriate data is copies to them from the parent Payments list.
the named range Payments will always contain at least a single row to ensure the retention of the required formulas and validation.
Note also please that there is a macro which automatically resizes the range Payments to a single row when a command button is pressed.
Select Range In Entire Column To Fit Range From Another
Mar 26, 2013i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies View RelatedSUMIF Last (3) Entries In A Range Rather Than Entire Range
Sep 14, 2013I'm looking to build a football data sheet on matches played with a column that adds up the last 3 match goals for the team in that row. I've only managed to get as far as adding up all goals for a team in a static date range using SUMIF. I imagine this is more complex and requires some kind of changing sum range that's relative to the cell I'm in.
I'm intermediate at best so any array formulas and VB script would preferred to be avoided if possible.
in the watered down example below, I'd like to add up all home team goals for Hereford in the last 3 matches, therefore excluding the game on the 10th (row 1) giving a total of 5. I'd like this formula to copy down from a13 to future matches and therefore update. So the next week's match will add goals for hereford from e13,e11,e8 but exclude e2, e5. Yes you've guessed it... I'm trying to work out recent team form to predict match outcomes for financial gain...
VBA To Copy Range Of Row Rather Than Entire Row
Feb 16, 2014This part of my code will copy the entire row to another worksheet within the same workbook.
I now need to modify it so that it only copies columns C through G of the row ... not the entire row. how to modify this section of the code?
Just FYI ... "Bdate" and "Edate" come from an entry made into an Input box. (mm.dd.yy) --- ie. 12/18/13 ..... 12/28/13
[Code] .....
Copy Range ISO Entire Row
Feb 15, 2010I have below macro button code, when i click on any row and enter button, entire row gets copied and paste in other sheet. Can we ammend this formula so that it should not copy entire row, instead it should copy range from row A to row Q only as i need to utilise other coloums which should not get copied to other sheet.
Private Sub CommandButton1_Click()
ActiveCell.EntireRow.Copy
Sheets("FWD Mary Ann").Range("A65536").End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
ActiveCell.EntireRow.Activate
End Sub
Dividing Entire Range By A Number
Jul 10, 2006I have a large worksheet that I need to make into a quarter of what it is now. Each of the numbers is just inputted, so I was thinking there is a way to divide it all by four.
View 6 Replies View RelatedOffset Function Not Capturing Entire Range
Feb 9, 2014My worksheet has 1096 rows of data including headers. I am trying to create dynamic named ranges using the OFFSET function but when I check to see if they are capturing the entire range I see they are not.
Here is my formula:
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA),1)
OR
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA)-1,1)
OR
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA)-1)
OR
OFFSET(SiteTrac!$FA$1,0,0,COUNTA(SiteTrac!$FA:$FA))
I have tried all four but every time it continues to stop on row 409. I have tried to name different columns and they all stop short too.
Stop Inserting Entire Row, Only Insert Range
Mar 24, 2009Right now, the code below is inserting an entire row when it pastes the values in I only want the values to be inserted in Range (A:AJ).
View 5 Replies View RelatedCreate Range For Entire Column From A Cell?
Jan 7, 2014I have this code:
Modules --> Module1:
Code:
Function Find(strSearch As String) As Range
Dim aCell As Range
Set aCell = ActiveSheet.Rows(1).Find(What:=strSearch, LookIn:=xlValues, _
[Code]....
I've walked this through the debugger. The Find function is finding the "Applicable" column fine (column 2). But how do I convert the aCell object to a range so that Intersect will be true, and will uppercase the cell value that was updated? If I were hardcoding this, I would return Range("B:B").
Sumif Entire Row Based On Dates Within Range
May 13, 2014B
C
D
E
F
G
H
I
J
K
L
M
N
2
Rep Names
9/1/2013
10/1/2014
11/1/2014
[Code] ......
Above Sheet name = Monthly Modified Targets
Below sheet name = Sales Stats Comparison
D
E
2
Date Format: MM/DD/YYYY
3
3/1/2014
5/31/2014
What I am attempting to do is to sum up the rows of the reps names based on the dates within the range.
So in this example above
Name1 = 0
Name2 = 55
Name3 = 25
Name4 = 0
when you change the date range it would change the totals.
The results of the example will be placed in
"Sales Stats Comparison" Range K11:K67
I have tried a few different options using index / sumifs / Match (date)
I just can't seem to pull more than one result and it does not sum up all the values in the row based on the date range.
Catch An Error And Reset The Entire Code To The Very Beginning And Skip That Entire Entry
Jun 5, 2008I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
How To Select An Entire Range Of Non-Contiguous Cells In A Column
Aug 19, 2009I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
TWo Way Cross Reference Formula Works But Not Across Entire Data Range
May 21, 2009I have attached a sample of the issue. The formula is found in cell B49. If I enter a gravity of 2.76 or higher in cell B47 I get #N/A in cell B49. Why will it not read any farther over than 2.75. I have been starring at this for awhile now. I might look pretty dumb after someone else looks at it.
View 2 Replies View RelatedVBA Macro - Copying Entire Row From Selected Cell (within Pre-defined Range)
Jun 21, 2014I am looking to run two separate macros. I have a project plan and I am looking to be able to select a button whereby on-click, a new row is created within a selected cell. However if the cell clicked is outside of a pre-determined range, then the task is automatically entered at the bottom of the plan. I would like for the copied row to go ABOVE the selected cell and have all of the same formatting as the row below (not the top - as is default in Excel).
The second is going to be very similar but will copy a task category (like a header item) and the first task (row) found below. It will also be copied from below and be inserted above the selected cell.Both macros will clear certain cells, whilst maintaining the contents of others, with formula contained. I.E. Columns C,D,E,H,I,J will be cleared.
Copy Entire Row By Range & Suppress 'Cannot Edit Links' Message
Jun 25, 2008I have 10 workbooks which have various calculations and have several links to each other. We use Excel 2003.
For each of these files, I have the following code in the Auto_Open module
Range Range(“TodayComp”) is a date taken form a link in another spreadsheet. It is on Column 3, but the row changes every day as more rows are inserted before it
This sub looks at Range(“TodayComp”) and checks the date on the cell directly above.
If say Range(“TodayComp”) is 6/25/2008, and the cell above is 6/22/2008, it will insert three rows right above Range(“TodayComp”). These rows need to be copied with formulas from the current row above Range(“TodayComp”)
Issue One:
The following code works (it copies the rows), but it takes forever to run, as you can see in bold, I copy and paste each cell, instead of the entire row.
Is there a way to copy and paste the entire row? Remember that I have only a named range to refer to, no cell address as it changes every time.
Public Sub Auto_open()
Update_Dates()
End Sub
Public Sub Update_Dates()
Dim tdy, prev As Date
Dim index, i, j, yr, no_inserts As Integer
Sheets("Comparison Computation").Activate
Selecting Entire Date Range To Be Lookup Based On Start And End Dates
Mar 6, 2013I have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.
So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.
In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.
Autofill Entire Row With Data From Above Over Entire Spreadsheet
Jul 28, 2014I'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.
For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:
142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)
So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.
Another small example data set:
1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31
And column A will always have data (unless the row is completely blank.
Resize The Name Box
Jun 20, 2006Is there a way to resize the name box, the box directly to the left of the formula bar?
View 2 Replies View RelatedResize Every Second Row
May 9, 2007I am trying to write a code to resize every second row between the range of A5 and A500 (Starting at A5) to 12.75 but am unable to find a simple loop to do this.
View 3 Replies View RelatedVBA Last Row With Offset And Resize
Feb 21, 2014I trying to out together a small script which performs the following:
-Select cell B7 and offset this by 12 columns and one row
-Resize this by 14 columns, then
-Apply the font format to the selected range from the first to the last row
The code below is what I've put together so far, and although this runs without issue, it's not applying the formatting.
[Code] .......
Offset And Resize
Jan 11, 2010I have 3 workbooks, the first one contains the data and the second is the “Table1” containing "Normal records" and the third is the “Table 2” containing only "900 Records". Tables 1 and 2 will be linked to Access…..
Here’s my issue….
From workbook 1, I would like to copy data from certain cells that contain data to Table 1
From workbook 1, I would like to copy data from certain cells that contain 900 service records data to Table 2
In workbook 1, I have identified which information i want to keep by using the following formula,
Resize Userform To Fit Screen?
Jul 20, 2013stretch" the userform to fit the height and width fo the screen. I dont want to simply change the height and width of the userform, i want the controls within the userform to stretch with the userform so that it looks the same, just fullscreen. this is what ive found by googling:
VB:
With Application
.WindowState = xlMaximized
Zoom = Int(.Width / Me.Width * 100)
Width = .Width
Height = .Height
End With
however, this just stretches it to match the width of my screen, but doestn consider the height, so that if i have a widescreen vs a square screen it will cut off the bottom of my userform. It would be great if there was a zoom type featur that zooms the vertical and horizontal dimensions seperately... more like a stretch than a zoom.