I know function Vlookup finds the largest value less than or equal to the given value. However, If I want to finds the smallest value larger than or equal to the given value, How can I do it? assuming I do not want to use VBA.
View 5 Replies
I am using the following array equation to return the value in column 1 for the smallest 5 numbers. It works for small 1 and 3 but i get a #NUM! for 2 , 4 , and 5. The smallest 5 numbers are:
0
3.196408441
4.491972091
4.491972091
4.491972091
Equation:
=INDIRECT(ADDRESS(SMALL(IF((NumRange)=SMALL(NumRange,1),ROW(NumRange),""),1),1))
I have a large set of numerical data, with each column having a text heading in the first row.
I want to use a function similar to HLOOKUP that can return the numerical value in a certain row of a column that has a specified heading....AND if there is more than one numerical value that meets the criteria, I want it to return the lowest numerical value.
My numerical data cannot be sorted into ascending order.
I want to ask if there is a way to find the next greatest maximum without a ton of auxiliary coding....Is there a function which does that in Excel? For example from the following list it would give 45:
1
34
45
26
78
29
7
I found this spreadsheet on ozgrid, but can not locate the original post to move my question to -- mods please move if you can.
As for the question:
The spreadsheet attached searches an array, and shows the top 3 scoring names. How do I modify it to show 3 lowest scoring names without changing the rank field?
I am very competent using the index match formula and have incorporated this into many spreadsheets to auto-fill for avoiding input errors. The objective I am attempting now is to retrieve from a list of 2800 entries the smallest return on an index match formula.
From the data below if my Index Match formula uses C1 to index and match my return is always a7 (-12.7) the first in the list, where my desire is a return of a19 (-14.11). To complex this problem I often have duplicate amounts that need to be listed when they fall into my parameters. I have figured that the Small function allows me to assign first smallest, second smallest, and so forth.
I prefer not to use vlookup for simplicity and error avoidance issues.
a b c
1 amount Reason for Movement 2250
2 -183.252150
3 -366.612150
4 -61.1 2154
5 -91.652150
6 -4.34 2450
7 -12.7 2250
8 -2.98 2250
9 -2.98 2250
10 -69.372452
11 -0.6 2451
12 -4.49 2250
13 -4.49 2250
14 -4.14 2250
15 -4.7 2250
16 -4.55 2250
17 -4.85 2250
18 -1.41 2250
19 -14.112250
20 -8.47 2250
I have an excel sheet with multiple columns. In one column I have X's and in another I have a limit. I need to look down the stuff column, find every X, match each X to its corresponding limit and then compare all the limits and return only the smallest limit found. I.e if I was looking down the stuff column I would find 4,6,8,8,3 and thus I would return 3 as my value. I am very new to working with excel formulas,
limit
something
stuff
4
x
[Code]....
How would I return a cell reference (address) to a cell that contains the largest number in a list?
I tried using "Address(large....) where I get the correct column, but the returned row # is the actual value in the cell (the highest # in the list).
I eventually will want to delete the highest number to leave the cell blank.
I have the following data
A1 - 65.23
A2 - 1923.52
A3 - 945.18
A4 - 182.54
In column B
B1 =exp(A1)
B4 =exp(A4)
both are fine, however
B2 =exp(A2) - it is showing #NUM
B3 =exp(A3) - it is showing #NUM
Same case for all larger numbers
I am looking to return the larger value of 2 cells into a seperate cell.
View 2 Replies View RelatedI have 83,33 value. If I like to increase into 84 and not 83 without decimal point
View 11 Replies View RelatedI want to do is import a TXT file that has about 70000 rows of numbers into excel. I know it has a max of 65536 so I would like it to import the numbers and put them into 2 columns C and the rest
in D.
Sub ImportLargeFile()
'Imports text file into Excel workbook using ADO.
'If the number of records exceeds 65536 then it splits it over more than one sheet.
Dim strFilePath As String, strFilename As String, strFullPath As String
Dim lngCounter As Long
Dim oConn As Object, oRS As Object, oFSObj As Object
'Get a text file name
strFullPath = Application.GetOpenFilename("Text Files (*.txt),*.txt", , "Please selec text file...") ........................
I'm trying to extract a first name and surname from a username :
CN=Joe Bloggs/OU=stneots/OU=EU/O=SAC needs to read Joe Bloggs
CN=Fred Smith/OU=stneots/OU=EU/O=SAC needs to read Fred Smith
CN=Ray Jones/OU=stneots/OU=EU/O=SAC needs to read Ray Jones
The string is always in this format and the name always has a space between. Given a day or so I could probably figure it out, but unfortunately deadlines are breathing down my neck,
I have Excel file A with a full list of IDs that were selected to take part in a study - about 5000 IDs with only one field "ID". I also have Excel file B with about 1500 ID of people from file A BUT who already took part in the study. Now what I need to do is filter out from file A all the people in file B so in file A I am only left with those who didn't take part.
View 2 Replies View RelatedI'm having some problems sorting a list of numbers that some are larger than others, but it would sort it by how large the number is in regards to 123 or 45... 45 would go first instead of 123... I tried to change the column to numbers but it still won't work. as well as in the custom sort section. I'll try to upload a sample...
View 11 Replies View RelatedI have a macro that should be exceptionally simple and works fine up until the point where I try to use an If statement with a conditional.
I have run the macro up to the If statement, at which point FinalRow is 40 and StartRow is 6, so the If statement below should run but it doesn't. I've had this problem before and just given up, the only thing I can think of is that the If statement only compares the first digit in the String.
I've only copied a small part of the code as I don't think the rest is relevant and just muddies the page but I can paste the rest if needs be...
I am currently using the following formula:
=SUMPRODUCT(('Step 1_Data_Current Qtr'!T2:T10000=B2)*('Step 1_Data_Current Qtr'!C2:C10000<>"")*1)
...to count the number of instances in a data set where:
T2:T10000=B2 is counting records where the value in the cell is set to B2
and
C2:C10000<>"" is counting records where the value in the cell is not blank.
The current formular is working, but I want to change the formula so that the values in C2:C10000 is looking up specific names (in this case, physicians) and not just where the field is not blank. How can I change to lookup physicians in a specific list that may change, located in a separate tab from the main data set?
I have a table that receives the number sequence 1 and sequence number 0.
I need to calculate the highest sequence numbers that repeat in Secunia lines.
A
B
C
D
E
F
G
H
I
J
K
L
Result
1
1
1
0
0
1
0
1
0
1
1
0
3
[code].....
See for example the last line.
1 1 0 0 1 0 1 1 1 1 1 0 = 5
I have a sequence number 1, where it repeats 5 times segudamente.that is greater than other sequences.
I have a form in excel that has a box which prompts you to add a picture when you click on it. It then resizes the picture so it fills the box. The file with no pictures is 2.3 MB. The picture is 700 KB. The file with the picture is 24.5 MB and 49 MB with 2 pictures. I need to E-Mail the form to other people but I can't send anything larger than 22 MB. I tried using th compress pictures option on the toolbar but it only took it down to 23.9 MB for a file with one picture. Why is it doing this and how can I make the file smaller?
View 9 Replies View RelatedI have 5 columns AS-AW. Column AS contains a letter (either A, B, C, D, E, F, or G) which is generated by a VLookup formula. Columns AT-AW contain numbers (from 1 to 6) generated by a conditional formula. I need column AX to combine column AS with the smallest of columns AT-AW. Is this possible?
View 9 Replies View RelatedEach time he clicks on a command button, the size of the command box grows larger and larger until it eventually is covering over the display area of the report. Also, the other buttons along with the one he clicks grows larger.
I hope my title was clear enough, but I’m not sure how to set this up. I have numbers in cells B4 and B13. I want to take the largest of these two numbers and multiply it by 0.85. I then want to take this number and compare it to a number in cell B23. If B23 is greater than the larger of B4 and B13 X 0.85, I want B33 to display “No” in a boldfaced red font. If B23 is less than the larger of B4 and B13 X 0.85, I want B33 to display “Yes” in a normal black font. This formula will be in cell B33.
View 5 Replies View RelatedI have a command button in a spreadsheet that for some reason each time I click it, the button and text gets larger. I can edit the button to shrink it down again, but can't stop the growth...
View 6 Replies View RelatedI have a set of data in column A that looks like this:
White:0:0|Counter Height:0:0|Orange:40:0|Counter Height:40:0|Green:40:0|Counter Height:40:0|White:40:0|Bar Height:40:0|Orange:80:0|Bar Height:80:0|Green:80:0|Bar Height:80:0|
The delimiter "|" separates the unique values of an item (in this example they are dining stools of differing heights and colors), I need to only keep the lower value and remove the larger one.
The example above contains both White:0:0 and White:40:0 as two different values associated with the same dining stool. I need to only have White:0:0 remain and White:40:0 to go away.
I need a formula that states: If the number in A1 is larger than the number in C6, but smaller than the number in B6, select the number in D6. But, if the number in A1 is larger than the number in C5, but smaller than the number in B5, select the number in D5 and so on through Row 2.
A
B
C
D
1
#
2
0.4
10.0%
[Code] ....
I'm trying to lookup a 10 digit number against a string of numbers seperated by commas. And then return the Carrier Name and On-Time
LOOKUP TABLE
Order #(s) Carrier Name On-Time
5082940535,5082940507 Freight Lines Yes
5083055781,5083056150,5083056098 Ocean X No
Order # Carrier Name On-Time
5082940535 ? ?
5083056150 ? ?
5082940507 ? ?
5083056098 ? ?
I am trying to use the codes below to find text "xmxy" and "xmx" within a column, then try to move the cells between the texts to the right by one column. I believe that the problem for the code below is that
Cells(j, "B").Insert (xlShiftToRight)
or If Cells(i, "B").Value = "xmxy" Then has limitations. I read that when you dim a variale as integer, it only can contain value between -32,768 to 32,767 . But I have more than 32,767 rows of data. I have already set dim i,j, etc. as long, but how do you set the cells range to recognize number larger than 32,767?
Sub ShiftRightbbb()
Dim i As Long, j As Long, lastrow As Long, rowscount As Long, count As Long
lastrow = Range("b" & 65000).End(xlUp).Row
For i = 1 To lastrow
If Cells(i, "B").Value = "xmxy" Then
For j = i To lastrow
Cells(j, "B").Insert (xlShiftToRight)
If Cells(j, "C").Value = "xmx" Then GoTo Nextgroup
Next j
Nextgroup:
End If
Next i
End Sub
I have sheet containing a schedule of data. It is a record of changes on a project, each change is sequentially numbered and contains a row of data (date of change, whether approved, cost of change etc). Each change is given a cost centre reference (1 of 10 cost centres are being used) depending on the type of change being made.
I need to keep that record of the overall schedule of changes but I also want to extract each of the cost centre categories into a sub table on the sheet to give a schedule of changes against each category.
I have almost achieved what I want but one method leaves blanks in the sub table which I want to avoid and the other method I used to remove the blank lines but needs the first method sheet calculated before it then goes to work and seems rather cumbersome and I suspect there is a much easier method. (I also want it to be compatible with excel 2003 so it can be used across several platforms.)
I had a spreadsheet with 17 photos on, one in each cell. I had to resize so you can see them all on the screen. If you have some pictures that are resized to fit in cells, is there any way to double click (or hover?) them and make them actual size or full screen when you want to view them in detail?
View 2 Replies View RelatedI have a spread sheet with 4 columns x 20,000+ rows running this forumla
=IF(FALSE=ISERROR(VLOOKUP($G2,$B:$B,1,0)),$G2,$H3)
The formula works perfect - the only problem is the calc times can take 10+ minutes ( and longer with larger data sets ) because the data sets are so large. Is there another formula or way to get the same result that would speed the process up?
