I have a table that receives the number sequence 1 and sequence number 0.
I need to calculate the highest sequence numbers that repeat in Secunia lines.
A
B
C
D
E
F
G
H
I
J
K
L
Result
1
1
1
0
0
1
0
1
0
1
1
0
3
[code].....
See for example the last line.
1 1 0 0 1 0 1 1 1 1 1 0 = 5
I have a sequence number 1, where it repeats 5 times segudamente.that is greater than other sequences.
In colmn A:A i need returned, which numbers (if any) are repeated and how often each repeated number occured.
Admitedly... I'm lost on this one.
I have the following data
A1 - 65.23
A2 - 1923.52
A3 - 945.18
A4 - 182.54
In column B
B1 =exp(A1)
B4 =exp(A4)
both are fine, however
B2 =exp(A2) - it is showing #NUM
B3 =exp(A3) - it is showing #NUM
Same case for all larger numbers
I work for a charity and I have to cancel the donations of people whose credit card donations have been declined in three consecutive months.
If in Column A I have a list of donor IDs whose credit cards were declined in Jan 2008, in Column B I have a list of donor IDs whose credit cards were declined in Feb 2008 and in Column C I have a list of donor IDs whose credit cards were declined in Mar 2008, is there a way of showing in a fourth column which donor IDs were common (repeated) in Columns A, B and C? I would have a title for each column in A1, B1 and C1, and also the column where the repeated donor IDs would be displayed.
I'm having some problems sorting a list of numbers that some are larger than others, but it would sort it by how large the number is in regards to 123 or 45... 45 would go first instead of 123... I tried to change the column to numbers but it still won't work. as well as in the custom sort section. I'll try to upload a sample...
View 11 Replies View RelatedI need a formula that states: If the number in A1 is larger than the number in C6, but smaller than the number in B6, select the number in D6. But, if the number in A1 is larger than the number in C5, but smaller than the number in B5, select the number in D5 and so on through Row 2.
A
B
C
D
1
#
2
0.4
10.0%
[Code] ....
I have 1-d array that gets populated from a number of sheets.
This array may contain duplicate entries... for example,
let's say this array contains animals.. cows, chickens, horses, pigs... etc.
What I would like to do is take this info from this array and create another where it would contain all the different types of animals but without all the repeats.
I have numbers in a table from A1 to X1. From that table I have selected some numbers in example 1: (44,3,11,20,44,3), in which the number 44 and 3 is repeated twice. What I want to do is to conserve one set of repeated numbers and to change one of the sets picking next number of repeated into the following number. Giving a result as follows (45,4,11,20,44,3) and if possible to put it in ascending order.
The same method applies in Example 2: but instead of 2 it conserves 3 repeated numbers and changes the other 3 into next following number.
*ABCDEFGHIJKLMNOPQRSTUVWX112345681011141617181920242729404144454647234Examlpe 1Examlpe 2544311204434451844518678Result 1Result 2945411204434561944518
Is there any macro or any formula for this query?
how to return the highest value of repeated controls in column A.
when comparing the numbers repeated in columns "A"
will return the highest value in column "D"
control
plug
block
value
Formula
115
20
1012
28,9
31,2
this is the highest value of repeated controls in column A
[Code] .......
I'm trying to automate a sequence.
I was gonna explain it but I couldn't make myself clear so I took a screenshot:
sequence.PNG
folder_type is what the user types, (for example, the letter "A"), and folder_code is a sequence that should auto-generate according to what was manually inserted in the folder_type field.
What formula could I use for this process?
I have a task to identify all the numbers in sequence in a worksheet, how do I do that?
Ex:
Column A
1
2
3
4
5
7
9
10
11
12
13
14
15
16
20
21
22
Desired output 1-5,7,9,10-16,20-22.
I have cells O1 to O300 numbers in random sequences of no more than 10
I need to average the 5 highest numbers in each sequence eg:
O P
1 2 16 (result)
2 20
3 4
4 6
5 14
6 12
7 8
8 10
9 16
10 18
11 blank cell
12 15 9 (result)
13 3
14 6
15 12
16 9
17 blank cell
18 blank cell
19 4 23 (result)
20 16
21 20
22 40
23 8
24 11
25 28
26 blank cell
down to 300 rows, the sequence of numbers can be from 1 to 10 but never
more than 10
I got a function : =IF(COUNT(O1:O10>=10,AVERAGE(LARGE(O1:O10,{1,2,3,4,5})),"
") but that works only for 10 numbers and not for less
There are 350 numbers in a column, 7 digits in each cell. I want to see which cells have 3 or more consecutive numbers. Only looking at the last 3 digits. Example. 1960657. 1960658. 1960659. 1960660. Has 4 consecutive numbers.
Conditional formatting ? or other?
I am trying to "auto fill" a column with numbers in sequential order. (1,2,3,4,5...) I typed in 1,2,3... in the first cells and clicked on the black corner dot to drag the sequence down. It keeps putting in 1,2,3,1,2,3,1,2,3..... I have also went into the advanced options and clicked the "enable fill handle and cell drag-and-drop" and also Alert before overwriting cells" and it still fills in 1,2,3,1,2,3....
View 9 Replies View RelatedI have a list of random numbers in column A the number range is from 0 to 20,000. What I am trying to do is to count the sequential numbers after each random number....sorry this is not really explained well so I willl use a numeric example.
A
23
24
25
33
34
60
77
80
Above is what I have in column A you can see that my number range starts a 23 so I would like to count the sequential numbers that occur from 23 in this case it would be count(23,24,25) giving the answer 3 I would like this answer to be inserted into column B next to 23 and the numbers that were counted in this formula then be deleted as rows (i.e. where the number 24 and 25 was counted then the rows containing these numbers are deleted), The macro moves then to count the next number.
In the case of just a single number then a value of 1 is entered into the column next to the number indicating that there was only one number in that sequence.
I was wondering whether it was possible to search for a sequence of numbers.
For example, if this is down a column:
A1: 5
A2: 4
A3: 5
A4: 6
A5: 9
Is it possible to have a find function to search for the sequence of numbers "4 + 5" and consequently highlight cells A2 and A3?
Attempting to do a spreadsheet for my golf club, to record scores, etc...
Managed to get it to pretty much what I want despite some very extreme looking formulae! So for some scores such as 56,56,57,57,54,54, Rank would just give me 3,3,5,5,1,1, so I have put a second column next to 56,56,57,57,54,54 where I input scores to seperate ties (better back nine scores), so in the above I would have for example 30,29 next to the two 56s, 27,29 next to the two 57s, and 27,28 next to the two 54s, so the rank would return 4,3,5,6,1,2. I have gone three stages further, so if, the back nine score was also tied, I have a column for the last 6 hole score, the last 3 hole score and even the last hole score. This is some serious formulae at this point. However, I now want the OPTION to rank the original data as 2,2,3,3,1,1 if I don't put any data in the back nine column.
This is so that I can input doubles scores on the same spreadsheet as singles scores, so if two people shoot the same score in singles I can input the back 9 scores etc to decide who comes out ahead, but in doubles I would just leave the back nine score blank, and then two people would share 1st in the rank, but then I need two 2nd ranks NOT 3rd ranks as it currently is.
Just so you can see how complex it is the current forumlae in the rank is here is an example:
=IF(O7="","",IF(K$2="MEDAL",RANK(O7,O$7:O$255,1)
+SUMPRODUCT(--(O7=O$7:O$255),--(P7>P$7:P$255))
+SUMPRODUCT(--(O7=O$7:O$255),--(P7=P$7:P$255),--(Q7>Q$7:Q$255))
[Code] .....
There are other things in there to sort out a few other issues as well, but I cant see the wood for the trees so to speak, to get it todo what I want!
I have also attached a sample from my spreadsheet to better demonstrate what I want!
I'd like Excel to run a check to see if a row of numbers runs in sequence.
*As in row 4, the numbers dont have to incriment each time
*As in row 2, there may be gaps in the data
*As in row 6, the data cant increase and then decrease. Each subsequent number must be the same or high than the previous
*There could be varying amounts of numbers per row, hence the results being in column R
As an added bonus it'd be nice to see where an error occurs, but just knowing theres an error (column R) is the primary goal.
Basically I'm trying to look up a series of numbers against a separate row of numbers and look for a match regardless or number order.
For example
If you look at the above picture I'm trying to do a query of some sort that will look up the numbers in A8:G8 in then search each row in the above table ie look for the numbers in B1:J1, B2:J2,B3:J3 etc I need to be able to search each row and look for the sequence of numbers regardless of order, if there is or inst a match for all numbers it should look at the next row and so on (maybe multiple matches). If there is a match then it should display the Name located in column "A" into cell G8. In this example to Jarrad row contains the numbers located in A8:G8. If there is no match it should display "None".
I'm trying to find any easy way to do this as I have over 500 rows I'm trying to query. The number's in A8:G8 in this example could also be more or less, ie here I have included 6 numbers but this could be 3 or 9 etc.
I'm use to highlighting two cells, find the plus, and copying a list of numbers down about 10 rows. Is there a macro instruction or VB instruction that will do the same?
Example,
Before:
G1010
G1011
After:
G1010
G1011
G1012
G1013
G1014
G1015
G1016
G1017
G1018
G1019
G1010
G1011
I would like to place in sequence increasing the numbers of one I creak in a cell.
In the formula I determine it I creak and the corresponding frame number to the placed ones.
The problem is that he is accumulated only the greater and not sequencia it.
1803456781101112
1134567810111280
but,80-80
Function ordenar2(Myrange As Range, num As Integer) As String
Dim Myorder As Double
Dim X2 As String
Dim n As Integer
n = 1
Do While n
I am setting up a spreadsheet with two columns. The first column will contain a persons name the second column will contain four numbers.
Name Numbers
Joe 1,3,12,24
John 4,12,23,24
Jill 6,14,19,26
I need to be able to search to find the following: the correct sequence of numbers e.g. if 1,3,12,24 were pulled out then that search is easy. If I was looking for someone who had the numbers 1,12,24 then I have a problem. I was thinking about putting the four numbers in to four separate columns but my Excel knowledge is poor.
I have 2 columns,
column A has a series of 8 digit numbers (some will match some will not) sorting in A-z order from lowest to highest value.
Column B is blank at the moment.
What I want
In column B i need to add numbers starting at 1 and moving down in sequence.
If more than one rows have the same number in column A they get the same numbe rin Column B
It's really a pain or have to hand type in the numbers and I can't figure out a easy way to do this.
Attached example.
Tab 1 = Origanl Data
Tab 2 = results i'm lookin for.
I'm a basic excel user really and cannot find a function that will allow me to complete the following:
CELL A1 includes the following sequence of numbers: 1,2,1,0,2,3
I would like to know how to put a formula/function into CELL B1 that sums up the sequence of numbers in CELL A1 (i.e 1+2+1+0+2+3)
I have a document that is a subject index for book that has terms that reference page numbers. The structure is for example: Employment, 587, 592, 553, 605, 233 The term is always following by comma and then space and listing of page numbers that subject reference applies. In many cases the page number references are out of sequence and I need them to be in numerical sequence. i.e. Employment, 233, 553, 587, 592, 605 There are many subject terms in index and need to check and fix sequence of page references for each.
View 6 Replies View RelatedI am looking to return the larger value of 2 cells into a seperate cell.
View 2 Replies View RelatedI have 83,33 value. If I like to increase into 84 and not 83 without decimal point
View 11 Replies View RelatedI want to do is import a TXT file that has about 70000 rows of numbers into excel. I know it has a max of 65536 so I would like it to import the numbers and put them into 2 columns C and the rest
in D.
Sub ImportLargeFile()
'Imports text file into Excel workbook using ADO.
'If the number of records exceeds 65536 then it splits it over more than one sheet.
Dim strFilePath As String, strFilename As String, strFullPath As String
Dim lngCounter As Long
Dim oConn As Object, oRS As Object, oFSObj As Object
'Get a text file name
strFullPath = Application.GetOpenFilename("Text Files (*.txt),*.txt", , "Please selec text file...") ........................
I'm trying to extract a first name and surname from a username :
CN=Joe Bloggs/OU=stneots/OU=EU/O=SAC needs to read Joe Bloggs
CN=Fred Smith/OU=stneots/OU=EU/O=SAC needs to read Fred Smith
CN=Ray Jones/OU=stneots/OU=EU/O=SAC needs to read Ray Jones
The string is always in this format and the name always has a space between. Given a day or so I could probably figure it out, but unfortunately deadlines are breathing down my neck,
I know function Vlookup finds the largest value less than or equal to the given value. However, If I want to finds the smallest value larger than or equal to the given value, How can I do it? assuming I do not want to use VBA.
View 5 Replies View Related