Return Text Based On Calculation Result
Dec 18, 2007
I need an excel function for this...
Say,
Cell A2= 8
Cell A3= 1
If A2 < (9*A3), then Cell A4 will say "Plastic", otherwise it will look to the next function, which is If A2 < (10*A3), then A4 will say "Compact", otherwise, it will look to the next one which is If A2 < (15*A3), then A4 will say "Semi-Compact" otherwise If A2> (15*A2), it'll say "Slender". so at the end, Cell A4 can only be one of these: 'Plastic' or 'Compact' or 'Semi-compact' or 'Slender'. How can i combine all the functions together?
View 2 Replies
ADVERTISEMENT
Oct 26, 2007
I have a spreadsheet where in cell E2 there is a drop down box with the following options to select: Warranty Replacement, Insurance Claim, Billing Issues, Retention Opportunities.
In cell F2 is where wait time minutes are generated depending on what is selected from the drop down box in E2. I am trying to create a nested IF formula for the following scenario:
Warranty Replacement = 20
Insurance Claim = 20
Billing Issues = 15
Retention Opportunities = 20
View 5 Replies
View Related
Apr 21, 2008
i have a sheet which adds up stock = SUM(F6-D6) (told u it was basic) what i want to do is if a negative number is the answer i want the sheet to change it to zero.
View 3 Replies
View Related
Jun 13, 2008
I have wind speeds and elevation data for 200 points. Each variable needs to go into a calculations spreadsheet on another worksheet. Once each variable gets put in the calculations automatically spit out the result. Now I need to use macro to automate this process so that it will repeat the steps I took for every line of data.
In English code terms, I want the Macro to say, take wind speed number and input in wind speed cell in calculations spreadsheet. Then take elevation number and input in calculations spreadsheet. Then take result number from calculations spreadsheet and input in cell. Then loop to go down the 200 lines of data. Is this possoble? Sorry for the non-technical wording.
View 3 Replies
View Related
May 24, 2008
I'm quite a novice at Excel. I have a column of values that I sum as follows;
A
0
0
0
0
0
0 <----------------sum of A1:A5
A formula may change one of the values in the above column to a '1' which means the sum will become '1'. The sum can only be '1' or '0' and only one value in the column will ever change. I need to add a value of 2 to another cell (say, C1) when the sum of A1:A5 changes from a value of '0' to '1'. I know this will probably involve the worksheet change event but am having a problem implementing it.
View 7 Replies
View Related
Dec 2, 2009
I've been searching the forums and web trying to figure out how to extract a text value from a 3D array result, to no avail or well beyond my understanding.
I've attached a file which shows an abbreviated version of the search (from the original 49 col x 400 row, which shows the name to date array which can return a sum.
What I'm looking to do is identify within this array result if there has been a text entry, and return the text as opposed to a sum of the remaining values. This is essentially a double check to make certain that there aren't hours scheduled when other events such as vac/loa/etc are also booked.
View 10 Replies
View Related
Mar 3, 2007
Any other day but today (I've been starring at numbers too long) I could do this.
I need a simple formula that will return:
a. 3 if resut is >= $2.5M
b. 2 if over >= $0.5M
c. 1 if
View 9 Replies
View Related
Oct 27, 2006
if Cell F42 contains 50%, then my fomula returns "wrong"
=IF(AND(0%<F42,F42<50%),"F",IF(AND(50%<F42,F42<60%),"D",IF(AND(60%<F42,F42<70%),"C",IF(AND(70%<F42,F42<80%),"B",IF(AND(80%<F42,F42<100%),"A","wrong")))))
how do I get the formula calculate correctly?
View 7 Replies
View Related
Sep 19, 2009
I have been trying this for hours but to no avail.
I have a table with 4 columns headers
Name, Amount, Loc and Code
The name may look like ABC 1, ABC 2....
The Loc may be in US, GB...
and the Code may be AA, BB
I need to return a result "Y" if the sum of the amount is > 100
and "N" if the sum of the amount < 100 based on the conditions
of the following :if
1) Name is the same entity, such as ABC 1 and ABC 2 and
2) Loc is the same, US..and
3) Code is the same
I have attached a sample to illustrates the result
View 10 Replies
View Related
Oct 17, 2006
I have four columns, A through D
Column C is returning a simple vlookup of A
I need Column D to return a value where C is TDMA return TDMA or when C is GSM lookup column B compare to tab2 (columns A through L) returning column 12.
View 5 Replies
View Related
Oct 2, 2007
I have a table of repair jobs done over a period of time. I just need to determine during which shift was the repair job done. The time during which the job was initiated is called Notification Time.
If the job was done at, say, 0100 hrs, then it was done during Shift 1 (0000hrs to 0800 hrs)
If done at 0830 hrs, Shift 2 (0801 to 1600hrs)
If done at 2030 hrs, Shift 3 (1601 to 2359 hrs)
I need a formula to allow me to determine the Shift no. by just checking against the Notification Time column.
View 9 Replies
View Related
Jan 17, 2008
I'm attempting to do the following:
A1 contains names of projects.
B1 contains variances from budgets, being positive or negative numbers.
C1 will contain results.
I need to know which of the B1 cells contain a number equal to or greater than 20%/-20% and output the names in A1 that match the criteria to C3.
View 8 Replies
View Related
Feb 4, 2008
I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
View 9 Replies
View Related
Sep 27, 2006
I have a spreadsheet that give me the percentage difference of two cell say a1 and a2 (=a2/a1)[format as % two decimal places]. The result is on say b5 as a %[format as % two decimal places]. Now on B6 I want to do this:
if B5 is >3.01% then b6 =" Market Test Required"
if B5 is +3% then b6 =110
if B5 is +2% then b6 =106
if B5 is +1% then b6 =103
if B5 is 0% then b6 =100
if B5 is -1% then b6 =96
if B5 is -2% then b6 =93
if B5 is -3% then b6 =90
if B5 is >-3.01% then b6 ="Market Test Required"
So on and so on.... I would really appreciate your help on this issue.
I have used excel for some time now but not with complex formulas or any vb.
View 9 Replies
View Related
May 21, 2008
I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
View 2 Replies
View Related
Jan 30, 2014
I deal with a rather large excel database (the range is A1:AV168266) that contains customer information. Some of these various customers are affiliated with a group called "ascend" and I need to be able to filter all my list by every customer affilliated with Ascend. The trouble is that the word "ascend" can appear in 8 different columns and usually when it appears in one column it doesn't appear in the others and their can also be more text in the cell beyond the word "ascend". I want to create a formula that will simply look for the word "ascend" in any cell of a row and return a result I can filter by. I will be putting the formula in column AW and put it in all 170,000 rows of that column, that way I can just filter by a single column.
I've played around with combining COUNTIF with SEARCH and MATCH with SEARCH but nothing seems to work.
View 7 Replies
View Related
Aug 6, 2009
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies
View Related
Jan 23, 2008
I'm trying to create an if statement to check to see if a cell has a value in it and return a math function. My problem is that some of the values contain more that just the name searched for. This is a basic example
A B C
10 Williams DXT if(B1="Williams",A1*.8,if(B1="Johnson",A1*.85,1))
20 Williams DPX if(B2="Williams",A2*.8,if(B1="Johnson",A2*.85,1))
30 Johnson AMV if(B3="Williams",A3*.8,if(B1="Johnson",A3*.85,1))
40 Johnson ACS if(B4="Williams",A4*.8,if(B1="Johnson",A4*.85,1))
50 Smith TWN if(B5="Williams",A5*.8,if(B1="Johnson",A5*.85,1))
View 4 Replies
View Related
May 8, 2014
see the sheet attached. To put into context, I am a teacher and want students to work on tasks, and have the answers to those tasks available to them but hidden, until a give them a password that unhides it.
On the attached document, Lesson1! K35:Q41 i have some answers to the task beside it in B35:H40. I want to hide these answers in some way (without affecting the columns as there is data above) and then when I want students to see the answer I give it to them and they enter it into L43 in this example. At this point the answers are revealed and stay revealed for revision purposes.
This will be repeated using different passwords for different tasks throughout the workbook e.g. L52 will be a different password revealing the answer in K48.
View 6 Replies
View Related
May 15, 2009
I am having a difficult time with a calculation. I took over someone else's duty who is no longer with the company. The calculation used did not account for entire columns & the data I need to pull fromhas grown larger than the calculation. When I hit "F2" to manually change the data array, everything works fine until I hit enter and then the result displays as 0.0%. When I hit the insert function button, the result shows as the correct number. I tried copying the format only from an adjacent cell, but this did not work. When I tried to undo my changes, the cell still displays as 0.0%
The original calc is:
=SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$N$2:$N$45998=9,1,IF(cData!$N$2:$N$45998=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$N$2:$N$45998<>"",1,0),""))
The new calc is:
=SUM(IF(cData!$T$2:$T$65536="Internal",IF(cData!$N$2:$N$65536=9,1,IF(cData!$N$2:$N$65536=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$65536="Internal",IF(cData!$N$2:$N$65536<>"",1,0),""))
The calc from the cell below the cell I am working in:
=SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$O$2:$O$45998=9,1,IF(cData!$O$2:$O$45998=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$O$2:$O$45998<>"",1,0),""))
View 3 Replies
View Related
Apr 22, 2008
I am doing some data analysis and need to figure out whether a number in column B is greater than a number in column A by £X.XX (Number to be determined) - is there a function, or custom function that would let me do this?
View 2 Replies
View Related
Oct 15, 2007
I am trying to Lookup a country to see if it is classified as a "Developed Country".
My formula would be in cell AA4. I want to see if the country in cell B4 is on a list of developed country's on another worksheet. IF the country is found on that list cell AA4 displays Developed. If the country is not on the list, cell AA4 displays Emerging.
I have tried an IF statement using the Match function and it does not work.
=IF(MATCH(B4,'Developed Country List'!$A$2:$A$37,0), "Developed", "Emerging")
View 4 Replies
View Related
Jul 1, 2008
I have a column of numbers such as
1001150
1001124
2224445
I need add a period in the following locations
10011.50
10011.24
22244.45
I figured this out using a format rule of
#.##
I then need to make the numbers negative so I did
-#.##
but this doesn't "stick", if I filter the numbers by negative numbers, none of them show up. So how do I make the formatting actually become the numbers? Auto Merged Post Until 24 Hrs Passes;After doing some more research I found the "precision as displayed" option. I can't find this option on Excel 2007, but I moved the files into 2003 and the option doesn't do anything. It is not permanently changing the column that I have added the formatting too.
View 4 Replies
View Related
Dec 4, 2009
I have 4 categories A, B, C & D. These are in desending importance, means A is most important and D is least important. Now there could be many A, B, C & Ds listed in a column. The challange is if coulmn contains A anywhere then the result should be A. If A is absent, then search for B, if present anywhere then display the result as B. It doesn't matter how many times A or any character is listed in column. I am attaching a sheet for better explanation.
View 4 Replies
View Related
Jun 2, 2009
Example: I have 2 sheets, a pivot and a data sheet. When selecting a different option on the pivot i want information returned from the data sheet (which is explanations of the information contained in the pivot) I need to add 2 criteria points.
View 5 Replies
View Related
Jan 26, 2010
I'm trying to create a formula that will allow me to pull test from a list (auto populate if possible). Essentially you will see on the second tab, a list of projects "Cali" for example. I'm trying to find a formula that will allow me to show the Customer and Life Cycle on the first Tab. If possible the Project Name too.
Essentially I want to be able to have all the data inputed into Tab 2 and let Tab 1 condense it into the designated fields. So basically what will allow me to see all of the "Cali" projects, and from that generate the Customer and Life Cycle (and Project if possible) on Tab 1. Keep in mind this does need to be automatic updating, so that as we input more information on Tab 2, it will automatically kick into Tab 1.
View 2 Replies
View Related
Nov 8, 2006
I am looking for a formula that will return the lowest value in a range, expressed as a letter.
The relative values of these letters are:
F=0
P=1
M=2
D=3
For example,
If in cells A1:A4 we entered the values F, P, M & D in A5 the result would be F (as it is the lowest value in the A1:A4 range).
I have included an example worksheet with fictional data and the intended result in the Final Score column.
View 7 Replies
View Related
May 20, 2007
I need to write a formula that will Display “Big Fish” if a customer is in the top 100 sales or ‘Not that great’ if the customer is not in the top 100 sales for the customer whose CUSTOMERID is equal to my ID.
An updated Spreadsheet can be found here
[url]
OR
[url]
View 9 Replies
View Related
Jan 22, 2008
I have 5 options that I am designating as "Allocation Methods" for a number of line items. They are numbered 1-5, but i have custom formatted them so that they have text in the formatting. They are as follows;
Allocation Method
1 - Allocation per Hard Cost
2 - Allocation PSF of Proj. or Hotel
3 - Allocation per Loan
4 - Allocation per Parking Spaces
5 - Allocation for Park
I will allocate one of the above allocation methods to every line item in an allocation column by hardcoding 1 - 5 in a cell for each line item. What i cannot figure out (or figure out if it is even possible) is how, for instance, can I type in a 1 and it have it automatically formatted per number 1 above & then if I change my mind to method 2 and type 2 it will automatically format per number 2 above. I know I can do this by creating a reference column right beside by allocation column, but I would prefer not to use that method.
View 6 Replies
View Related
Mar 5, 2008
I have a database of customers that are all sorted by a customer number.
I have a form that has a number of fields that display customer info. When I use a blank of this form and put the customer number in it's correct field, all the other info fields do a vlookup on the customer number in the database file and return the info, such as phone numbers, name, address, etc.
Here's my question;
How can I check for a blank (using ISBLANK, I assume) to check to see if the customer number exists in our database and, if it's NOT blank, operate on it with the following example which is used to return their insurance expiration date.
=IF((VLOOKUP(B9,'[carrier list.xls]Sheet1'!$A$2:$P$1276,3,FALSE))<TODAY(),"EXPIRED",VLOOKUP(B9,'[carrier list.xls]Sheet1'!$A$2:$P$1276,3,FALSE))
I realize that this may be a sledgehammer approach and that Access is probably a better tool, but my company has not shelled out the $$ for Access...yet.
View 4 Replies
View Related
