I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
I have four columns, A through D
Column C is returning a simple vlookup of A
I need Column D to return a value where C is TDMA return TDMA or when C is GSM lookup column B compare to tab2 (columns A through L) returning column 12.
I have a spreadsheet that give me the percentage difference of two cell say a1 and a2 (=a2/a1)[format as % two decimal places]. The result is on say b5 as a %[format as % two decimal places]. Now on B6 I want to do this:
if B5 is >3.01% then b6 =" Market Test Required"
if B5 is +3% then b6 =110
if B5 is +2% then b6 =106
if B5 is +1% then b6 =103
if B5 is 0% then b6 =100
if B5 is -1% then b6 =96
if B5 is -2% then b6 =93
if B5 is -3% then b6 =90
if B5 is >-3.01% then b6 ="Market Test Required"
So on and so on.... I would really appreciate your help on this issue.
I have used excel for some time now but not with complex formulas or any vb.
I have tried searching for this topic and have been unsuccessful. Perhaps my search was too broad. Either way, I am trying to understand how to search/query a specific data entry among several sheets, and then return corresponding values from adjacent cells.
View 3 Replies View RelatedI created a drop down menu from a named data range on a seperate spreadsheet in the same workbook. Based on the selection from that drop down menu I want a preassigned number to pull into another cell. I'm not thinking of the correct formula or something, because it's not working. Could it be because it's text? My spreadsheet with the data is as follows:
Bridger to American Fork 051725
Hunter to American Fork 051725
Hunter to Delta 051715
Hunter to Hiawatha 051728
Navajo to Am. Fork w/ front 051725
Navajo to Am. Fork w/o front 051725
The 1st column is the origination/destination and I named that range "freight hauls". Which is what the dropdown menu on another sheet (AP Reconcilliation) consists of. From that, I want the 2nd column number to pull into another cell on the AP Recon sheet. The formula I wrote that isn't working is: =index('AP Reconciliation'!A2:B8,match(A6,'Freight Hauls List'!B2:B7,0),2)
I have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
View 9 Replies View RelatedI have a production planning spreadsheet that is updated every week from a database to a new sheet. This sheet is 'Sheet1', last weeks update becomes 'Sheet2'. Every day people annotate and colour cells for various orders, depending on their place within the planning scheme. It's really only the formats that I need to copy across, I could use the VLOOKUP function for the values - So I suppose you could say I'm looking for a VLOOKUP macro/VBA Code which keeps the original formatting (cell colour etc.)
View 2 Replies View RelatedI have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe
456 Jane Doe
List of individuals with state business
John Doe AR
John Doe CO
John Doe FL
John Doe MS
John Doe TX
Jane Doe MS
Jane Doe TX
Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR
123 John Doe CO
123 John Doe FL
456 Jane Doe MS
456 Jane Doe TX
621
532
249
I have these numbers located in column A (rows 1:3)
formula that will return my search result (in these case 532) as well as the information immediately above & below the location of cell that has my search info?
I am working on a spreadsheet for some packages we are sending to multiple recipients. I have figured out how to get all the weights calculated, now my Mailing Manager has asked me to come up with a calculation for the actual postage amount for all the 1400+ packages...Unfortunately it is not as easy as that would seem.
There are 9 different mailing zones and each zone has 19 weight categories and each category has a corresponding postage amount for the package. So I need to come up with a formula to calculate the package postage amount based on those multiple categories.
For example:
Zone 1:
0-1lb = $2.12
1.1-1.5lb = $2.12
1.6-2lb = $2.21
etc
How do I go about entering in that information from which a formula can determine the proper package postage cost and what formula do I need to use in conjunction.
This is all done within a address list so each package is a row and all weights and zones will be in a separate column.
Package is in zone X and weighs Y pounds therefore the postage is Z. Something like that.
I am preparing an "automated" order form. I have a list of products (ten) in a pull down list, a list of options (3) in a pull down list and a list of the pricing.
So, If PRODUCT_A with OPTION_A, then PRICE = $X.
If PRODUCT_A with OPTION_B, then PRICE = $Y.
If PRODUCT_B with OPTION_C, then PRICE = $Z.
etc.
I want the user to select the product, then the option, and have the correct price "pre-fill" the cell.
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies View RelatedI am trying to lookup two distinct values in two columns (turquoise and green) in 'Cust data' tab and correlate them to the same values in two columns on 'Driver activity' tab, then return a result from column in yellow on 'Driver Activity' tab to populate the driver name in yellow column on 'Cust data' tab.
File is attached.
See the attached file. I think index and match may help me having done a search several times in these forums, but having been trying to do this for several hours I am just struggling to understand each part of the formula unfortunately. I have a list of data (cellsA1 to C33) which I need to use as my source for the information that is displayed in cell I2 based on the two selections made in cells F2 and G2.
I can't use filter and data sort in this situation - I am creating a spreadsheet for someone who truly knows nothing about excel, so I need this to be as simple as pointing and clicking at cells F2 and G2 and the formula doing all other work. Is it possible to do what I am asking for (hopefully the fact that peoples' names are repeated and months are repeated won't cause a problem?
I have below table and want to get new order quantity if the closing stock of a particular product is less than or equal to the ROL after viewing that a previous order of the same product has not been placed within the lead time of that particular product even the closing stock is less than ROL.
Product
Date
New Order
[Code]....
- 1st it match the product with the relevant one
- Then compare closing stock parameter
- Then finally look up the previous order and compare it with relevant lead time
Any other day but today (I've been starring at numbers too long) I could do this.
I need a simple formula that will return:
a. 3 if resut is >= $2.5M
b. 2 if over >= $0.5M
c. 1 if
if Cell F42 contains 50%, then my fomula returns "wrong"
=IF(AND(0%<F42,F42<50%),"F",IF(AND(50%<F42,F42<60%),"D",IF(AND(60%<F42,F42<70%),"C",IF(AND(70%<F42,F42<80%),"B",IF(AND(80%<F42,F42<100%),"A","wrong")))))
how do I get the formula calculate correctly?
I have a spreadsheet with three years worth of data for a property I manage. Each column has cost data for the year and the specific department/cost for that year as the row value.
I have a column between the years that calculates the percent of gross revenue for the specific department/cost.
I would like to find (or create) a formula that will compare the percentage (or specific cost) for the three years within the specific row and if the increase year over year over year exceeds a trigger value it returns something (check me out/true/false) whatever.
The cost items for the property are in the hundreds so I'm trying to come up with a way to quickly see what specific cost items are going up (or down) more rapidly then what would be considered normal.
I have wind speeds and elevation data for 200 points. Each variable needs to go into a calculations spreadsheet on another worksheet. Once each variable gets put in the calculations automatically spit out the result. Now I need to use macro to automate this process so that it will repeat the steps I took for every line of data.
In English code terms, I want the Macro to say, take wind speed number and input in wind speed cell in calculations spreadsheet. Then take elevation number and input in calculations spreadsheet. Then take result number from calculations spreadsheet and input in cell. Then loop to go down the 200 lines of data. Is this possoble? Sorry for the non-technical wording.
I have been trying this for hours but to no avail.
I have a table with 4 columns headers
Name, Amount, Loc and Code
The name may look like ABC 1, ABC 2....
The Loc may be in US, GB...
and the Code may be AA, BB
I need to return a result "Y" if the sum of the amount is > 100
and "N" if the sum of the amount < 100 based on the conditions
of the following :if
1) Name is the same entity, such as ABC 1 and ABC 2 and
2) Loc is the same, US..and
3) Code is the same
I have attached a sample to illustrates the result
I have a table of repair jobs done over a period of time. I just need to determine during which shift was the repair job done. The time during which the job was initiated is called Notification Time.
If the job was done at, say, 0100 hrs, then it was done during Shift 1 (0000hrs to 0800 hrs)
If done at 0830 hrs, Shift 2 (0801 to 1600hrs)
If done at 2030 hrs, Shift 3 (1601 to 2359 hrs)
I need a formula to allow me to determine the Shift no. by just checking against the Notification Time column.
I have a spreadsheet where in cell E2 there is a drop down box with the following options to select: Warranty Replacement, Insurance Claim, Billing Issues, Retention Opportunities.
In cell F2 is where wait time minutes are generated depending on what is selected from the drop down box in E2. I am trying to create a nested IF formula for the following scenario:
Warranty Replacement = 20
Insurance Claim = 20
Billing Issues = 15
Retention Opportunities = 20
I need an excel function for this...
Say,
Cell A2= 8
Cell A3= 1
If A2 < (9*A3), then Cell A4 will say "Plastic", otherwise it will look to the next function, which is If A2 < (10*A3), then A4 will say "Compact", otherwise, it will look to the next one which is If A2 < (15*A3), then A4 will say "Semi-Compact" otherwise If A2> (15*A2), it'll say "Slender". so at the end, Cell A4 can only be one of these: 'Plastic' or 'Compact' or 'Semi-compact' or 'Slender'. How can i combine all the functions together?
I'm attempting to do the following:
A1 contains names of projects.
B1 contains variances from budgets, being positive or negative numbers.
C1 will contain results.
I need to know which of the B1 cells contain a number equal to or greater than 20%/-20% and output the names in A1 that match the criteria to C3.
I have a problem with the formula that lookup all values in ascending order and returning all the corresponding values. eg: I was intended to lookup for the value in ascending order under the Total Occurrence and returning all the corresponding value under the Nos Group but encountered the same Nos Group was returned when there is same value appeared under the Total Occurrence.
View 3 Replies View RelatedI am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
Hi there, please can you help me transfer data from 1 spreadsheet to another (I have attached a file which has 2 sheets).
I am trying to populate columns G to L (sheet B) with data from column H (sheet A) - the lookup is between 'Material' & '7410','7090','7680','7060','8630','7580' on sheet B & material & plant on sheet A.
I have tried H&VLOOKUP & INDEX/MATCH but I keep returning a #N/A..
im trying to get the lookup answer based on two values the current formula i have is
=VLOOKUP(AND(A1,B1),Sheet2!$A$1:$C$31,3,FALSE)
which naturally returns N/A... i might even be using the wrong formula?
Is there a way to use a lookup formula to return all values of a given text, not just the value of the first listing of the text. In an attempt to clarify my already confusing request, if A5 on "worksheet1" is "Land" I want E5 on "worksheet1" to return the summation of values assigned to "Land" "worksheet2" "column B" any time "Land" appears on "Worksheet2" "Column A".
View 2 Replies View RelatedI have a column of values for example:
114
162
92
114
120
120
114
162
I need to be able to search this column and return the first instance only of each number in a different column in numerical order - which in this example will result:
92
114
120
162